Enacfire E60 Earbuds Manual | User Guide 2021

Enacfire is one of the best-known wireless earbuds brands in the world, not only for its variety of earbuds but also for the quality they have. Because of that, today we will talk about one of these pairs of earbuds, the Enacfire E60, and we will show you a step-by-step user guide in this Enacfire E60 Earbuds Manual.

Enacfire E60 Earbuds Manual | All You Need To Know!

Enacfire E60 Earbuds Manual – Volume control instructions

• Increase volume: Touch and hold the multifunctional button on the right earbud.
• Decrease volume: Touch and hold the multifunctional button on the left earbud.

NOTE: the prompt sound “beep” will be produced when the volume reaches minimum or maximum level.

Enacfire E60 Earbuds Manual – Pairing instructions / How to pair?

Pair using the charging case

• Step 1: Take out the earbuds from the charging case. They will automatically pair to each other with the LED light on the left earbud flashing blue and white alternately.
• Step 2: Turn on the Bluetooth function in the Bluetooth device.
• Step 3: Refresh the Bluetooth device listing.
• Step 4: Select the paired audio device named “ENACFIRE E60” to connect.

Pair without using the charging case

• Step 1: Power on the earbuds by touching the multifunctional button for 1 second. Release when you hear the prompt sound “Power on” and the LED light on earbuds flashes blue.
• Step 2: Turn on the Bluetooth function in the Bluetooth device.
• Step 3: Refresh the Bluetooth device listing.
• Step 4: Select the paired audio device named “ENACFIRE E60” to connect.

Enacfire E60 Earbuds Manual – How to factory reset?

• Step 1: Place both earbuds in the charging case.
• Step 2: Touch and hold the multifunctional button on both earbuds for 8 seconds. The LED lights will flash blue and white alternately.
• Step 3: Delete the “ENACFIRE E60” Bluetooth name from the connected device and turn off Bluetooth.
• Step 4: Take out both earbuds from the charging case.
• Step 5: Turn on the Bluetooth on the device and select the paired audio device named “ENACFIRE E60” to connect.

Enacfire E60 Earbuds Manual – How to turn off and on

Turn the earbuds off with the charging case

Put the earbuds into the charging case. They will automatically turn off.

Turn the earbuds off without the charging case

• Step 1: Turn off the Bluetooth on the connected device to disconnect the earbuds.
• Step 2: Touch the multifunctional button on either of the earbuds for 8 seconds to power them off.

Turn the earbuds on with the charging case

Take out the earbuds from the charging case. They will automatically turn on and pair to each other.

Turn the earbuds on without the charging case

Power on the earbuds by touching the multifunctional button for 1 second. Release when you hear the prompt sound “Power on” and the LED light on earbuds flashes blue.

Enacfire E60 Earbuds Manual – How to use / controls instructions

• Answer an incoming call: Tap the multifunctional button on any of the earbuds once.
• End a call: Tap the multifunctional button on any of the earbuds once.
• Reject an incoming call: Touch the multifunctional button on any of the earbuds for 2 seconds.
• Play or pause music: Tap the multifunctional button on any of the earbuds once when music is playing.
• Play the next song: Double-tap the multifunctional button on the right earbud.
• Play the previous song: Double-tap the multifunctional button on the left earbud.
• Activate the voice assistant: Tap the multifunctional button on any of the earbuds 3 times, and the voice assistant will be activated after a “bleep” prompt sound.

Enacfire E60 Earbuds Manual – How to charge?

Charging the earbuds

To charge the earbuds, all you have to do is put the buds in place in the charging case, and they will start charging automatically. It takes them about 1.5 hours to fully charge.

Charging the charging case

To charge the charging case, all you have to do is to plug one end of the USB cable into apower supply, and the other end into the charging port on the charging case. After doing this, the indicator lights will flash during the charging process and then turn off.

Charging the charging case with a Qi wireless charging pad

• Step 1: To charge the charging case, all you have to do is to ensure your Qi wireless charging pad (purchased separately) is plugged into a power source.
• Step 2: Place the charging case on top of the charging pad and ensure the bottom charger icon aligns with the coil on the pad.
• Step 3: Once properly aligned, the LED lights on the front of the charging case should flash to indicate it is charging.

It takes it about 1.5 to 2 hours to fully charge.

Troubleshooting

Enacfire E60 left or right earbud not working

• In case you realize that one of the earbuds or the charging case is having problems, the best option is to go for a replacement or return.
• If this is not the problem, try resetting the earbuds as said in the “How to factory reset?” part.

Enacfire E60 left earbud low volume

If the left earbud has a lower volume compared to the right earbud, the best thing to do is try cleaning the earbud, since dirt usually collects in these that prevent the correct passage of sound.

FAQ

Are the Enacfire E60 waterproof?

Yes, they are certificated with IPX8, this being the highest waterproof rating and nano-coating material.

Enacfire E60 Earbuds Manual – Warnings

1. Never dismantle or refit the product to avoid malfunction or fire hazards.
2. Keep away from corrosive liquids to avoid damages to the product.
3. Keep away from extreme ambient temperatures below -10C° or above 60°C.
4. Keep away from children and pets.
5. Never touch the earbuds with sharp objects, otherwise, it will easily cause scratches.
6. Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.
7. If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.

We hope you now know how to operate the earphone from the above Enacfire E60 Earbuds Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.