kurdene-s8-bluetooth-wireless-earbuds-manual-1

Kurdene S8 Bluetooth Wireless Earbuds Manual | Step-by-Step Guide 2021

On this page we have already spoken several times about a large number of wired headphones and wireless headphones, thus showing all the incredible features that they bring inside. This time we are going to talk about the user manual that comes with one of these, and it is the instruction manual that comes with the Kurdene S8, and in this new article, we are going to show you everything that comes in this one, as well as the correct way to use them in this Kurdene S8 Bluetooth Wireless Earbuds Manual.

Kurdene S8 Bluetooth Wireless Earbuds Manual | All you need to know about!

Kurdene S8 Bluetooth Wireless Earbuds Manual – How to pair?

Pairing both earbuds

Step 1: Make sure the earbuds and your phone or other Bluetooth devices are next to each other (within 3 feet, no obstacles between).

Step 2: Turn on the Bluetooth of your phone or other Bluetooth devices.

Step 3: Turn on the earbuds (when they are in shutdown state) and the earbuds will enter pairing mode (LED indicator on the left earbud flashes blue and white alternately).

Step 4: In the list of found Bluetooth devices in your phone or other Bluetooth devices, choose “Kurdene S8″ to pair.

Step 5: Enter “0000” if your phone or Bluetooth device asks you to enter a code to pair.

Pairing just one earbud (Mono use)

Step 1: Make sure the earbud and your phone or other Bluetooth devices are next to each other (within 3 feet, no obstacles between).

Step 2: Turn on the Bluetooth of your phone or other Bluetooth devices.

Step 3: Take the earbud out of the charging case.

Step 4: Turn off the earbud by pressing and holding the touch panel for 4 seconds.

Step 5: Press and hold the touch panel on the earbud until the indicator flashes blue and white alternately and earbud enters pairing mode.

Step 6: In the list of found Bluetooth devices in your phone or other Bluetooth devices, choose “Kurdene S8”.

Step 7: Enter “0000” if your phone or Bluetooth device asks you to enter a code to pair.

Kurdene S8 Bluetooth Wireless Earbuds Manual - How to pair?

Kurdene S8 Bluetooth Wireless Earbuds Manual – How to factory reset?

Step 1: Turn off both earbuds.

Step 2: Delete Bluetooth connection from all devices.

Step 3: Hold the touch panel on each earbud at the same time for 15 seconds.

Step 4: Release your hold.

Step 5: Press and hold the earbuds touch panel for 3 seconds to turn them on.

Step 6: Turn on Bluetooth device and connect.

Kurdene S8 Bluetooth Wireless Earbuds Manual – Volume control

  • Volume up: Touch and hold the touch panel on the left earbud.
  • Volume down: Touch and hold the touch panel on the right earbud.

Kurdene S8 Bluetooth Wireless Earbuds Manual – How to Control? / Controling Instructions

  • Next song: Press the touch panel on the left or right earbud twice to skip to the next song.
  • Answer a call: Press the touch panel or operate on your phone to answer an incoming call.
  • Hang up a call: Press the touch panel or operate on your phone to hang up an ongoing call.
  • Reject an incoming call: Press the touch panel twice to reject an incoming call.
  • Activate voice control of phone: In paired state, press and hold the touch panel for 2 seconds.
  • Volume up: Touch and hold the touch panel on the left earbud.
  • Volume down: Touch and hold the touch panel on the right earbud.
Kurdene S8 Bluetooth Wireless Earbuds Manual - How to Control? / Controling Instructions

Kurdene S8 Bluetooth Wireless Earbuds Manual – How to turn on and off?

Turn on

  • Automatically: The earbuds are automatically on when you take them out of the charging case.
  • Manually: Press and hold the touch panel on both earbuds for 2 seconds to turn on.

Turn off

  • Automatically: The earbuds are off automatically when you put them back into the charging case.
  • Manually: Press and hold the touch panel on both earbuds for 4 seconds to turn off.

Kurdene S8 Troubleshooting

Kurdene S8 Bluetooth Wireless Earbuds won’t connect

Step 1: Put the earbuds back to the charging case and make sure that they are off.

Step 2: Take the earbuds out of the case and they are automatically on.

Step 3: Wait that the indicator on the left earbud flashes blue and white alternately and earbuds enter pairing mode.

Step 4: Choose “Kurdene S8” in your phone to pair.

If the pairing still fails, check the following points:

  • Make sure the earbuds and your Bluetooth device are next to each other or within 3 feet and there are no obstacles between.
  • There is no signal interference nearby (check the question “Connection is not stable” for signal interference conditions).
  • Try to factory reset your Bluetooth device.

One of the Kurdene S8 Bluetooth Wireless Earbuds not working (left or right)

If one of the earbuds does not work, make sure that both earbuds are paired and that they are not in mono mode. In case both are paired, it is recommended to factory reset the earbuds.

Kurdene S8 Troubleshooting

FAQ

Are Kurdene S8 bluetooth earbuds good?

Yes, they are a pair of decent-performing earbuds.

Are Kurdene earbuds waterproof?

Yes, these earbuds are IPX8 waterproof.

Kurdene S8 Warnings

  1. Never dismantle or refit the product to avoid malfunction or fire hazards.
  2. Keep away from corrosive liquids to avoid damages to the product.
  3. Keep away from extreme ambient temperatures below -10C° or above 60°C.
  4. Keep away from children and pets.
  5. Never touch the earbuds with sharp objects, otherwise, it will easily cause scratches.
  6. Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.
  7. If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.

We hope you now know how to operate the earphone from the above Kurdene S8 Bluetooth Wireless Earbuds Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

Show Comments (6)
  1. The ear Bud volume worked great, but after one month, the volume on the earbuds became different. One high, the other very low. I tried resetting them, but still low on one side. After playing with it a bunch, not both are very low and I can’t get them to turn up? Thoughts?

    1. First try checking if the earbuds are not jammed with dirt. If so try using a cotton swap to remove it. An indian explains this on here https://www.youtube.com/watch?v=aIWGNFvCBCA&ab_channel=BlaupunktAudioIndia

      If not successful, try burning them with high rock music on the max sound possible. I would recommend doing this on PC, on VLC media player on which you can increase the volume up to 200 percent. Leave them to burn for an hour. Check again if the volume improves.

      • Power on: LED indicators stay blue for a second
      • Power off: LED indicators to stay white for a second
      • Pairing mode (using both earbuds): LED indicator on the left earbud flashes blue and white alternately
      • Pairing mode (using only one earbud): LED indicator on the earbud flashes blue and white alternately
      • Connected to a Bluetooth device: LED indicators flash blue every 7 seconds
      • Low battery: LED indicators to flash white every 5 seconds and a voice reminder prompts every 2 minutes
      • Earbuds are being charged: LED indicators stay white
      • Earbuds are fully charged: LED indicators are off

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.