kz-s1-user-manual-d

KZ s1 User Manual | Step-by-Step Pairing Guide | Troubleshooting

Last updated:

On this page we have already spoken several times about a large number of wired headphones and wireless headphones, thus showing all the incredible features that they bring inside. This time we are going to talk about the user manual that comes with one of these, and we will show you the KZ s1 User Manual, which has a Step-by-Step pairing guide and the answers to all the questions you may have.

KZ s1 User Manual: How to turn on or off the KZ s1?

  • Turn on: The two KZ s1 earbuds will automatically turn after removing them from the charging case.
  • Turn off: Both earbuds will automatically turn off after putting them inside the charging case and closing it.

NOTE: In case both processes are not done automatically, they can be done manually as follows:

  • Manual turn on: After removing them from the charging case, press and hold the touch panel on both earbuds for 3 seconds.
  • Manual turn off: Before putting them in the charging case, press and hold the touch panel on both earbuds for 6 seconds.

KZ s1 User Manual: How to pair the KZ s1?

Bluetooth pairing

Step 1: Turn on the earbuds

Step 2: You have to place both earbuds in their case, and double click the touch panel of it to enter Bluetooth pairing. This will allow a connection to be started between the KZ s1.

NOTE: If no connection is made within 10 minutes of the earbuds being switched on, the earbuds will automatically switch off to save power.

Pairing both earbuds

The two earbuds have been connected to each other by factory, so you don’t need to pair them again. Also, it is worth mentioning that, in this case, the left earbud is the default master one.

Step 1: Pick up both earbuds from the charging case.

Step 2: A few seconds later, the two earbuds will connect, and soon you may hear a voice prompt saying “left channel / right channel”.

Step 3: Press and hold the touch panel of each earbud for 2 seconds at the same time to power them on. A few seconds later, the earbuds will be connected to each other. After this, the master one (left earbud) will enter the pairing mode, and blue and red lights will flash alternately so that later, the same happens with the right earbud.

Step 4: Activate the Bluetooth function on your smart device to search for new devices, and look for “KZ s1” and select.

After that, you may hear a voice prompt saying “pairing successful/second device connected”.

KZ s1 User Manual: How to pair the KZ s1?

Pairing left earbud only

Step 1: When the earbuds are off, press and hold the touch panel of the left earbud for 4 seconds until blue and while lights flash quickly, and soon after that, you may hear “pairing”.

Step 2: Activate the Bluetooth function on your smart device to search for Bluetooth devices.

Step 3: Look for “KZ s1” in the device list display and select.

Step 4: When a successful connection is made, a blue light will flash once every 7 seconds. The left earbud is now ready to use.

Pairing right earbud only

Step 1: When the earbuds are off, press and hold the touch panel of the right earbud for 4 seconds until blue and while lights flash quickly, and soon after that, you may hear “pairing”.

Step 2: Activate the Bluetooth function on your smart device to search for Bluetooth devices.

Step 3: Look for “KZ s1” in the device list display and select.

Step 4: When a successful connection is made, a blue light will flash once every 7 seconds. The right earbud is now ready to use.

How to pair the KZ s1?

KZ s1 User Manual: How to use the KZ s1?

After having connected the headphones to the smart device of choice, the amount of operating options we have is minimal.

  • Turn on: we have to press for 3 seconds on the touch panels
  • Turn off: press the touch panels for 6 seconds
  • Pause / Resume: with a short touch on any headset
  • Next song: press the right earbud twice
  • Previous song: press the left earphone twice
  • Game mode: press 3 times on the right earphone
  • Call the telephone assistant: press 3 times on the left earpiece
  • Take a call: we must press any headset once while they call us. With another touch during the call, we will hang up
  • Reject call: we have to press and hold any headset while we are receiving the call

KZ s1 User Manual: How to charge the KZ s1?

Charging the earbuds

Plug the earbuds into the charging case, then turn on the charging case. In this way, the earbuds will start to charge automatically as long as the charging case has a battery.

Charging the charging case

Step 1: Plug the charger cable into the charging case.

Step 2: Connect the charger to a USB power source, and the charging case indicator will flash red during the charging.

NOTE: If charging does not start, disconnect the charger plug it in again, and retry.

KZ s1 User Manual: How to charge the KZ s1?

Troubleshooting

Q1. Why is the left and right headset switching unsuccessful?

When the earbuds are connected to the mobile phone for the first time, the pairing prompt box that pops up must be clicked, otherwise, the left and right earbuds will not be switched freely.

Q2. When using both earbuds, only one ear has sound?

The reason for that is that the pairing between the two earbuds was not successful. It is recommended to clear the Bluetooth pairing information and reconnect.

Q3. Earbuds disconnect?

The earbuds disconnect when it exceeds the device’s effective range. Return to Bluetooth range within 3 minutes and they will automatically reconnect.

Q4. Pairing with a computer is not successful?

Please, confirm if the computer has the Bluetooth function if there is no Bluetooth adapter that can be equipped with a USB interface.

We hope you now know how to operate the earbuds from the above KZ s1 User Manual. Want to know anything about these earphones? Do not hesitate to ask in the comments section.

More Stories
kurdene-s8-bluetooth-wireless-earbuds-manual-1
Kurdene S8 Bluetooth Wireless Earbuds Manual | Step-by-Step Guide 2021