Honor-Choice-Earbuds-X3-Lite-Manual-5

Honor Choice Earbuds X3 Lite | Pairing & Charging

The Honor Choice Earbuds X3 Lite earbuds come with specs such as Gaming mode support, up to 28 hours of total battery life using the charging case, dual-mic noise reduction technology, a 10mm composite diaphragm speaker in each earbud, Bluetooth 5.3, app support, the IPX4 sweat and dust-proof certification, and much more. Learn how to use these earbuds using this manual!

Honor Choice Earbuds X3 Lite Manual & Instructions

How to Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

If the earbuds don’t enter pairing mode automatically, then press and hold the multifunction touch button on both earbuds for about 5 seconds.

Step 2: Unlock the desired device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “Earbuds X3 Lite” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

To PC (Windows)

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

If the earbuds don’t enter pairing mode automatically, then press and hold the multifunction touch button on both earbuds for about 5 seconds.

Step 2: Unlock the desired device.

Step 3: Go to the Settings.

Step 4: Go to “Bluetooth and other devices”.

Step 5: Turn on Bluetooth on the device.

Step 6: Click on “Add device”.

Step 7: Select the “Earbuds X3 Lite” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

Honor-Choice-Earbuds-X3-Lite-Manual-1

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds two times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Activate the Gaming mode: Press the multifunction touch button on any of the earbuds three times.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Honor-Choice-Earbuds-X3-Lite-Manual-3

What Do The Lights Mean?

Charging case

  • A red light on while charging: The case is charging.
  • A green light on while charging: The case is fully charged.
  • A red light on with the earbuds inside: The earbuds have less than 20% of battery.
  • A green light on with the earbuds inside: The earbuds have about or more than 20% of battery.
  • A red light flashing with the earbuds inside: The earbuds have less than 5% of battery.

A Guide To The Honor Choice Earbuds X3 Lite App

The Honor Choice Earbuds X3 Lite can be used together with an app specially made for them, and it is the HONOR AI Space, which can be found in the Play Store and App Store.

When you connect the earbuds to the app, a large main screen will appear, where you can not only see the battery percentage of the earbuds and the charging case, but you can also control the different sound modes. On the other hand, you can also configure the equalizer, and you have the option to control the various functions of the earbuds, app settings, user guides, and the ability to update the earbuds.

Honor-Choice-Earbuds-X3-Lite-Manual-4

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Honor-Choice-Earbuds-X3-Lite-Manual-5

FAQs

Are the Honor Choice Earbuds X3 Lite waterproof?

No, the Honor Choice Earbuds X3 Lite are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant.

Do the Honor Choice Earbuds X3 Lite have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Honor Choice Earbuds X3 Lite have a low latency/gaming mode?

Yes. These earbuds have a low latency/gaming mode.

Can the Honor Choice Earbuds X3 Lite connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Honor Choice Earbuds X3 Lite noise-canceling?

No. These earbuds don’t come with noise-cancellation technology.

We hope you now know how to operate the earphone from the above Honor Choice Earbuds X3 Lite manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.