YUEHEMEI YHM Q2 Manual | Step-by-step User Guide

The YUEHEMEI YHM Q2 earbuds come with specs such as 6 hours of battery life and up to 30 hours using the charging case, Bluetooth 5.3 technology, Game mode support, 16.2mm drivers and built-in microphones on each earbud, a charging time of only 1.5 hours, around 10 meters of connection range, and much more. Learn how to use these earbuds using this YUEHEMEI YHM Q2 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

YUEHEMEI YHM Q2 Specs Sheet

Model	YUEHEMEI YHM Q2
Dimensions	Earbuds: 48.9*43.3*18.6 mm Charging case: 96*61.7*31.3 mm
Waterproof/IP ratings	IPX4
Bluetooth version	V5.3
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC
Driver	16.2mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 6 hours Charging case: Around 24 hours
Charging Time	Earbuds: Around 1.5 hours Charging case: Around 1.5 hours
App Support	No
Controls/Features	Play and pause a song, play the next and previous song, answer, end, and reject a call, voice assistant, turn the volume up and down, Game mode
Accessories	Charging case, USB cable, quick start guide
Price	Around 35 USD

YUEHEMEI YHM Q2 Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• Quick start guide.

YUEHEMEI YHM Q2 Manual | Pairing & Charging Guide

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the YHM Q2 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair.

Step 7: Select the YHM Q2 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

How To Control These Earbuds?

NOTE: The touch area is placed on the circular part of the body of the earbuds.

• Play and pause a song: Press the touch area on any of the earbuds one time.
• Play the next song: Press the touch area on the right earbud two times.
• Play the previous song: Press the touch area on the left earbud two times.
• Turn the volume up: Press and hold the touch area on the right earbud.
• Turn the volume down: Press and hold the touch area on the left earbud.
• Answer an incoming call: Press the touch area on any of the earbuds two times.
• End a current call: Press the touch area on any of the earbuds two times.
• Reject an incoming call: Press and hold the touch area on any of the earbuds.
• Activate the voice assistant: Press the touch area on the right earbud three times.
• Activate the Game mode: Press the touch area on the left earbud three times.

What Do The Lights Mean?

Earbuds

• A white light flashes while resetting: The earbuds are resetting.

Charging Case

• A white light on with the earbuds inside: The earbuds are charging.
• Said white light turns off with the earbuds inside: The earbuds are fully charged.
• A red light flashes while charging: The case is charging.
• A red light on while charging: The case is fully charged.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

How To Clear The Pairing List?

Method 1

Step 1: With the earbuds out of the case, press the touch area on both earbuds four times, and then press and hold for 5 seconds.

The earbuds will disconnect and power off, and the pairing record will be deleted on the last paired device.

Method 2

Manually remove or forget the earbuds on the last paired device.

How To Reset The Earbuds?

Step 1: Place the earbuds into the case and keep the lid open.

Step 2: Press and hold the touch area on both earbuds for about 10 seconds, or until a red light flashes three times. That will indicate that the reset was successful.

Do These Earbuds Have An App?

No, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above YUEHEMEI YHM Q2 manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.