Home Audiophile Earbuds Manuals The CrossBeats Neopods 300 earbuds come with specs such as the IPX5 sweat and dust-proof certification, Bluetooth 5.3 with 10 meters of working range, SBC and AAC codecs, Game mode support, 13mm drivers, and much more. Learn how to use these earbuds using this CrossBeats Neopods 300 manual! If you are interested in purchasing these earbuds, you can easily do it using the CrossBeats official website. Also, in case you are interested in giving the original manual a look, you can do it here. What's Inside ToggleCrossBeats Neopods 300 Specs SheetCrossBeats Neopods 300 AccessoriesCrossBeats Neopods 300 Manual | Pairing & Charging GuideHow To Pair The Earbuds?How To Wear These Earbuds?How To Turn On And Off?How To Activate The Mono Mode?How To Charge The Earbuds?How To Control These Earbuds?How To Reset And Re-Pair These Earbuds?Do These Earbuds Have An App?What Do The Lights Mean?Some Common Problems & TroubleshootingFAQs CrossBeats Neopods 300 Specs Sheet ModelCrossBeats Neopods 300WeightEarbuds: Around 3.7 grams each Charging case: Around 38.7 gramsWaterproof/IP ratings IPX5Bluetooth version V5.3Range/Distance10 metersConnectivity Port/ Charging CableType-CAudio Decoding SBC, AACDriver 13mmSpeaker frequency response20Hz – 20kHzBattery Life Earbuds and charging case: Around 40 hoursCharging Time Earbuds: Around 1 hour Charging case: Around 1 hourApp Support NoControls/Features Play and pause a song, turn the volume up and down, play the next and previous song, answer, end, and reject a call, voice assistant, Game modeAccessories Charging case, USB cable, warranty card, ear tips, QR code to download the user manualPriceAround 35 USD CrossBeats Neopods 300 Accessories The earbuds come with the following accessories: Charging case. USB cable. QR code to download the user manual. Warranty card. Ear tips. Credits: Mr LazyTech Credits: Mr LazyTech Credits: Mr LazyTech Credits: Mr LazyTech CrossBeats Neopods 300 Manual | Pairing & Charging Guide How To Pair The Earbuds? To Android And iOS Devices Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. A white light will be on, and the earbuds will now be ready to pair with any device. Step 2: Unlock the desired device. Step 3: Go to the device’s settings. Step 4: Turn on Bluetooth on the desired device. Step 5: Search for a new device. Step 6: Select the CB-Neopods 100 earbuds. If a password is needed, type “0000” or “1234”. After that, the pairing will be done. To Windows (PC) Step 1: Turn on the Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Click on Bluetooth. Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. A white light will be on, and the earbuds will now be ready to pair with any device. Step 7: Select the CB-Neopods 100 earbuds. If a password is needed, type “0000” or “1234”. After that, the pairing will be done. How To Wear These Earbuds? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. How To Turn On And Off? Turn On Automatically: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. Manually: Press the multifunction touch sensor on both earbuds for 3 to 4 seconds. After that, the earbuds will turn on. Turn Off Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically. How To Activate The Mono Mode? To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. How To Charge The Earbuds? Earbuds To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically. Charging Case To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically. How To Control These Earbuds? NOTE: The multifunction touch sensor is placed on the outside part of the body of the earbuds. Play or pause a song: Press the multifunction touch sensor on any of the earbuds one time. Turn the volume up: Press and hold the multifunction touch sensor on the right earbud for 2 seconds. Turn the volume down: Press and hold the multifunction touch sensor on the left earbud for 2 seconds. Play the next song: While listening to music, press the multifunction touch sensor on the right earbud two times. Play the previous song: While listening to music, the multifunction touch sensor on the left earbud two times. Answer an incoming call: Press the multifunction touch sensor on any of the earbuds one time. End a current call: Press the multifunction touch sensor on any of the earbuds one time. Reject an incoming call: Press and hold the multifunction touch sensor on any of the earbuds for about 2 seconds. Activate the voice assistant: Press the multifunction touch sensor on the left earbud three times. Activate the Game mode: Press the multifunction touch sensor on the right earbud three times. How To Reset And Re-Pair These Earbuds? NOTE: To ensure a good result, make sure that the earbuds are fully charged. Step 1: Place the earbuds into the charging case. After that, the earbuds will turn off automatically. Step 2: Go to the device’s settings. Step 3: Delete the CB-Neopods 100 earbuds from the devices’ Bluetooth list. This will reset the earbuds. Step 4: Turn on Bluetooth on the desired device. Step 5: Search for a new device. Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. A white light will be on, and the earbuds will now be ready to pair with any device. Step 7: Select the CB-Neopods 100 earbuds. If a password is needed, type “0000” or “1234”. After that, the pairing will be done. Do These Earbuds Have An App? Sadly, these earbuds don’t come with a specialized app or app support. What Do The Lights Mean? Earbuds A white light on: The earbuds are ready to pair with any device. A red light on while on the charging case: The earbuds are charging. Said red light turns off while on the charging case: The earbuds are fully charged. A blue light flashes: The earbuds are out of the case. Some Common Problems & Troubleshooting Left/Right/One side of the earbuds has stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case. 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working range. If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left/Right/One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. The microphone is not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund. The earbuds are not connecting to Windows/laptop/PC If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth. 2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. FAQs Are the CrossBeats Neopods 300 waterproof? No, the CrossBeats Neopods 300 are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle. Do the CrossBeats Neopods 300 have a microphone? Yes, the earbuds come with integrated microphones. Do the CrossBeats Neopods 300 have a low latency/gaming mode? Yes, these earbuds have a low latency/gaming mode. Can the CrossBeats Neopods 300 connect to PCs and laptops? Yes, these earbuds can connect to PCs and laptops. Are the CrossBeats Neopods 300 noise-canceling? No, these earbuds don’t come with noise-cancellation technology. How to know when the CrossBeats Neopods 300 are fully charged? When the earbuds are charging, a light turns on. When fully charged, the light turns off. We hope you now know how to operate the earbuds from the above CrossBeats Neopods 300 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.
