edifier-tws200-manual-d

Edifier TWS200 Manual | Step-by-step Pairing & Troubleshoot Guide

In this page we have already spoken several times about a large number of wired headphones and wireless headphones, thus showing all the incredible features that they bring inside. This time we are going to talk about the user manual that comes with one of these, and it is the instruction manual that comes with the Edifier TWS200, and in this new article we are going to show you everything that comes in the Edifier TWS200 Manual.

Edifier TWS200 Manual: How to turn on or off the Edifier TWS200?

  • Turn on: The two Edifier TWS200 earbuds will automatically turn on and pair after removing them from the charging case.
  • Turn off: Long press the power button until the indicator flashes red and then turn off.

Edifier TWS200 Manual: How to pair the Edifier TWS200?

Bluetooth pairing

  • First, you have to place both earbuds in their case, and double click the pairing button of it to enter Bluetooth pairing. This will allow a connection to be started between the Edifier TWS200.

Both earbuds pairing

  • After that, and with the earbuds still in their case, press and hold the pairing button of it for approx. 8 seconds to enter the TWS pairing mode, so that the earbuds will connect automatically.

After doing both steps, and with any smart product, search for and connect to the device called “Edifier TWS200“, and after the pairing process became successful, a white light will flash twice every 5 seconds.

Edifier TWS200 Manual: How to pair the Edifier TWS200?

Edifier TWS200 Manual: How to use the Edifier TWS200?

After having connected the headphones to the smart device of choice, the amount of operating options we have is minimal.

  • To accept or end a call, you have to double click any of the earbuds.
  • To pause or play any song or video, on the same way, you have to double click any of the earbuds.
  • To fast forward any song you are listening to, you have to triple click the right earbud.
  • To play the previous song you are listening to, you have to triple click the left earbud.

Edifier TWS200 Manual: How to charge the Edifier TWS200?

Charging the earbuds

  1. Plug the earbuds into the charging case, then turn on the charging case. In this way, the earbuds will start to charge automatically as long as the charging case has battery.

Charging the charging case

  1. Plug the charger cable into the charging case.
  2. Connect the charger to a USBpower source, and the charging case indicator will flash red during the charging.

NOTE: If charging does not start, disconnect the charger plug it in again, and retry.

Power indicator of the charging case

  • If the power indicator on the charging case flashes six times rapidly when it is opened, it indicates that the case has a low battery capacity.
  • If battery level is 100% – 80%, the indicator flashes 3 times slowly
  • If battery level is 80% – 40%, the indicator flashes twice
  • If battery level is 40% – 10%, the indicator flashes once
  • If battery level is less than 10%, the indicator flashes 6 times

How to charge the Edifier TWS200?

Troubleshooting

When charging the charging case, the indicator is o­ff

  • Please, make sure the charging case is correctly connected with any power source.

The Edifier TWS200 does not emit any sound

  • Check if the earbuds are working.
  • Check if the earbuds volume is at an appropriate level.
  • Check if the earbuds are correctly connected to the smart device.
  • Check if the earbuds are operating within a normal working range.

The call quality of the earbuds is not good

  • Check if the smart device is in an area with strong signal.
  • Please ensure the earbuds are within their effective distance (10 meters) and that there’s no obstacle between the earbuds and device.

When playing music, cannot control pause/play/previous track/next track via the earbuds

  • Please ensure the paired device supports the AVRCP (Audio Video Remote Control Profile) profile.

Edifier TWS200 Manual: Troubleshooting

Warnings about the Edifier TWS200

  • To prevent any possible hearing damage, do not listen at high volume levels for long periods of time.
  • Fully understand the user manual before use.
  • Do not use any type of fast charger to charge the earbuds to avoid affecting batteries’ service life.
  • If not used for long periods of time, please charge the earbuds with lithium battery at least once per three months.
  • Keep the earbuds away from humid places to avoid affecting internal circuit.
  • Do not put the product in places exposed to sun or with high temperature. High temperature will shorten the service life of any electronic components, damage the battery and make plastic components deformed.
  • Do not put the earbuds in cold places to avoid damaging the internal circuit board.
  • Do not dismantle the earbuds. Non-professional personnel may damage the product.
  • Do not drop, strongly vibrate or strike the earbuds with hard objects to void damaging the internal circuit
  • Do not use drastic chemicals or cleaner to clean the earbuds.
  • Do not use sharp objects to scratch the earbuds surface to avoid damaging its shell.

We hope you now know how to operate the earphone from the above Edifier TWS200 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.