Home Audiophile Earbuds Manuals The Enacfire Geek earbuds come with specs such as the Qualcomm QCC3020 chipset, CVC 8.0 noise-canceling technology, a total battery life of about 36 hours, Bluetooth 5.0, 1.5 hours of charging time, SBC and AAC support, the amazing IPX8 waterproof certification, and much more. Learn how to use these earbuds using this Enacfire Geek manual! If you are interested in purchasing these earbuds, you can easily do it using the Enacfire official website. Also, in case you are interested in giving the original manual a look, you can do it here. What's Inside ToggleEnacfire Geek Specs SheetEnacfire Geek AccessoriesEnacfire Geek Manual | Pairing & Charging GuideHow To Charge The Earbuds?What Do The Lights Mean?How To Wear These Earbuds?How To Turn On And Off?How To Pair The Earbuds? – Dual ModeHow To Pair The Earbuds? – Single ModeHow To Control These Earbuds?The Earbuds’ Voice PromptsDo These Earbuds Have An App?Some Common Problems & TroubleshootingFAQs Enacfire Geek Specs Sheet ModelEnacfire GeekWeightEarbuds: Around 4.8 grams eachWaterproof/IP ratings IPX8Bluetooth version V5.0Range/Distance10 metersConnectivity Port/ Charging CableType-CAudio Decoding SBC, AACDriver 13mmSpeaker frequency response20Hz – 20kHzBattery Life Earbuds: Around 6 hours Charging case: Around 30 hoursCharging Time Earbuds: Around 1.5 hours Charging case: Around 1.5 to 2 hoursApp Support NoControls/Features Play and pause a song, turn the volume up and down, play the next and previous song, answer, end, and reject a call, voice assistantAccessories Charging case, user manual, USB cable, ear tips, warranty cardPriceAround 55 USD Enacfire Geek Accessories The earbuds come with the following accessories: Charging case. User manual. USB cable. Ear tips. Warranty card. Enacfire Geek Manual | Pairing & Charging Guide How To Charge The Earbuds? Earbuds To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically. Charging Case To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically. What Do The Lights Mean? Earbuds A blue and white light flashing: The earbuds will be ready to pair with any device. A light on while on while on the charging case: The earbuds are charging. The light turns off while on the charging case: The earbuds are fully charged. Charging Case One light on while charging: The case has about 1/4 of the battery. Two lights on while charging: The case has about 2/4 of the battery. Three lights on while charging: The case has about 3/4 of the battery. Four lights on while charging: The case is fully charged. How To Wear These Earbuds? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. How To Turn On And Off? Turn On Automatically: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically. Manually: Press and hold the multifunction touch button on both earbuds for about 1 second. After that, the “Power on” voice prompt will sound, and the earbuds will turn on. Turn Off Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically. Manually: Press and hold the multifunction touch button on both earbuds for about 8 seconds. After that, the earbuds will turn off. How To Pair The Earbuds? – Dual Mode To Android And iOS Devices Step 1: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically and pair with each other. A blue and white light will start flashing, and the earbuds will be ready to pair with any device. Step 2: Unlock the desired device. Step 3: Go to the device’s settings. Step 4: Turn on Bluetooth on the desired device. Step 5: Search for a new device. Step 6: Select the Enacfire Geek earbuds. If a password is needed, type “0000” or “1234”. After that, the pairing will be done. To Windows (PC) Step 1: Turn on the Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Click on Bluetooth. Step 6: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically and pair with each other. A blue and white light will start flashing, and the earbuds will be ready to pair with any device. Step 7: Select the Enacfire Geek earbuds. If a password is needed, type “0000” or “1234”. After that, the pairing will be done. How To Pair The Earbuds? – Single Mode Without The Charging Case NOTE: Make sure that the earbuds are turned off. Step 1: Press and hold the multifunction touch button on the selected earbud for about 1 second. A blue and white light will start flashing, and the earbud will be ready to pair with any device. Step 2: Unlock the desired device. Step 3: Go to the device’s settings. Step 4: Turn on Bluetooth on the desired device. Step 5: Search for a new device. Step 6: Select the Enacfire Geek earbud. If a password is needed, type “0000” or “1234”. After that, the pairing will be done. How To Control These Earbuds? NOTE: The multifunction touch button is placed on the top part of the body of the earbuds. Play or pause a song: Press the multifunction touch button on any of the earbuds one time. Turn the volume up: Press and hold the multifunction touch button on the right earbud. Turn the volume down: Press and hold the multifunction touch button on the left earbud. Play the next song: While listening to music, press the multifunction touch button on the right earbud two times. Play the previous song: While listening to music, press the multifunction touch button on the left earbud two times. Answer an incoming call: Press the multifunction touch button on any of the earbuds one time. End a current call: Press the multifunction touch button on any of the earbuds one time. Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds. Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times. The Earbuds’ Voice Prompts Power on: The earbuds turn on. Do These Earbuds Have An App? Sadly, these earbuds don’t come with a specialized app or app support. Some Common Problems & Troubleshooting Left/Right/One side of the earbuds has stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case. 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working range If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left/Right/One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. The microphone is not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund. The earbuds are not connecting to Windows/laptop/PC If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth. 2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. Credits: Brian Unboxed FAQs Are the Enacfire Geek waterproof? Yes, the Enacfire Geek are waterproof (IPX6 and up). They have a rating of IPX8, this being the highest and meaning that not only are they against water but are also protected against heavy rain and heavy sweat. Do the Enacfire Geek have a microphone? Yes, the earbuds come with integrated microphones. Do the Enacfire Geek have a low latency/gaming mode? No, these earbuds don’t have a low latency/gaming mode. Can the Enacfire Geek connect to PCs and laptops? Yes, these earbuds can connect to PCs and laptops. Are the Enacfire Geek noise-canceling? No, these earbuds don’t come with noise-cancellation technology. How to know when the Enacfire Geek are fully charged? When the earbuds are charging, a light is on. When fully charged, the light turns off. We hope you now know how to operate the earbuds from the above Enacfire Geek manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.
