1more-ComfoBuds-2-Manual-5-1

1more ComfoBuds 2 Manual | Step-by-step, In-depth Guide 2022

The 1more ComfoBuds 2 comes with an ultra-large 13.4mm dynamic driver, 12 studio-grade EQ presets, Bluetooth 5.2 with HFP/A2DP/AVRCP protocols, a battery life of 6 hours + 18 hours using the charging case, the IPX5 certification, and much more. Learn how to use them with this new 1more ComfoBuds 2 Manual.

1more ComfoBuds 2 Manual | Everything You Need To Know!

1more ComfoBuds 2 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “1MORE ComfoBuds 2”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 7: Select “1MORE ComfoBuds 2”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

1more-ComfoBuds-2-Manual-1
Credits: usa.1more.com

1more ComfoBuds 2 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

1more ComfoBuds 2 Manual | How to Turn On And Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

1more-ComfoBuds-2-Manual-2
Credits: usa.1more.com

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds two times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

1more ComfoBuds 2 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the 1more ComfoBuds 2, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

1more-ComfoBuds-2-Manual-3
Credits: usa.1more.com

1more ComfoBuds 2 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable.

1more ComfoBuds 2 Manual | LED Light Status

Charging case

  • A green light on: The case is fully charged.
  • A yellow light on: The case has half of its battery.
  • A red light on: The case has a low battery.
  • A red light flashing: The case has a really low battery and needs to be charged.
  • A green light on with the earbuds inside: The earbuds are almost fully charged.
  • A yellow light on with the earbuds inside: The earbuds have half of its battery.
  • A red light on with the earbuds inside: The earbuds have a low battery.
  • The green light turns off with the earbuds inside: The earbuds are fully charged.
1more-ComfoBuds-2-Manual-4
Credits: usa.1more.com

1more ComfoBuds 2 Manual | How to Reset?

Step 1: Delete all information of the “1more ComfoBuds 2” from the connected device.

Step 2: Place the earbuds into the charging case and keep its lid open.

Step 3: Press the button on the charging case three times. After that, the resetting will be done.

A Guide To 1more ComfoBuds 2 APP

The 1more ComfoBuds 2 can be used with an application, called 1MORE MUSIC. This application is available for iOS and Android devices. In this, you will not only have information about the different 1more products, but you will also find FAQs, configurations, and the possibility of increasing or decreasing the volume of the earbuds.

Through the application, and on the main screen, you can see all the information that it offers, as well as the specifications of the connected earbuds, the noise cancellation modes, FAQs, and different user guides.

1more ComfoBuds 2 Manual | How to Update the Firmware?

Step 1: Turn on the earbuds (with at least 50% of the charge) and connect them to the 1MORE MUSIC app.

Step 2: Choose the corresponding device name on the “Search for device” page.

Step 3: Click on the device.

Step 4: Click “OTA firmware upgrade”.

Step 5: Click the “UPGRADE NOW” and start upgrading.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

1more ComfoBuds 2 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

1more-ComfoBuds-2-Manual-5-1

FAQs

Are 1more ComfoBuds 2 waterproof?

No, the 1more ComfoBuds 2 are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

Does 1more ComfoBuds 2 have a microphone?

Yes, the 1more ComfoBuds 2 have an integrated microphone.

Do 1more ComfoBuds 2 have low latency/gaming mode?

No! The 1more ComfoBuds 2 don’t have a low latency/gaming mode.

Can 1more ComfoBuds 2 connect to PC and Laptop?

Yes, the 1more ComfoBuds 2 can connect to PCs, laptops and tablets.

Are 1more ComfoBuds 2 noise cancelling?

No! These earbuds don’t come with noise cancellation technology.

How to know when 1more ComfoBuds 2 fully charged?

When the earbuds are charging, some lights will turn on in the charging case. When fully charged, those lights turn off.

We hope you now know how to operate the earphone from the above 1more ComfoBuds 2 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.