1More-PistonBuds-Pro-Manual-5

1More PistonBuds Pro Manual | Pairing & Troubleshooting

Aliexpress banner

The 1More PistonBuds Pro comes with hybrid active noise cancellation, a 10mm dynamic driver, 4 microphones with DNN, fast charging in 5 minutes, Bluetooth 5.2, the IPX5 certification, AAC, and SBC codecs, and much more. Learn how to use them with this new 1More PistonBuds Pro Manual.

1More PistonBuds Pro Manual | Everything You Need To Know!

1More PistonBuds Pro Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “1More PistonBuds Pro”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 7: Select “1More PistonBuds Pro”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

1More-PistonBuds-Pro-Manual-1

1More PistonBuds Pro Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

1More PistonBuds Pro Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn off:  Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

1More-PistonBuds-Pro-Manual-2

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds two times.
  • Play the next song: Press the multifunction touch button on the right earbud two times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a call: Press the multifunction touch button on any of the earbuds two times.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.
  • Change between ANC-strong, ANC-mild, WNR, and pass-through modes: Press and hold the multifunction touch button on any of the earbuds.
1More-PistonBuds-Pro-Manual-3

1More PistonBuds Pro Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Edifier X2, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

1more PistonBuds Pro Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

1More-PistonBuds-Pro-Manual-4

1more PistonBuds Pro Manual | LED Light Status

Earbuds

  • Red light flashing: Earbuds have a low battery.
  • Red light on while charging: Earbuds charging.
  • Red light off while charging: Earbuds fully charged.

Charging case

  • Red light on: Case has low battery.
  • Yellow light on: Case has half of the battery.
  • Green light on: Case fully charged/has a full battery.

A Guide To 1More PistonBuds Pro APP

The 1More PistonBuds Pro can be used with an application, called 1MORE MUSIC. This application is available for iOS and Android devices. In this, you will not only have information about the different 1more products, but you will also find FAQs, configurations, and the possibility of increasing or decreasing the volume of the earbuds.

Through the application, and on the main screen, you can see all the information that it offers, as well as the specifications of the connected earbuds, the noise cancellation modes, FAQs, and different user guides.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

1More PistonBuds Pro earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

1More-PistonBuds-Pro-Manual-5

FAQs

Are 1More PistonBuds Pro waterproof?

The 1More PistonBuds Pro have the IPX5 certification, which means they’re dustproof and protected against water projected from a nozzle.

Does 1More PistonBuds Pro have a microphone?

Yes, the 1More PistonBuds Pro have integrated microphones.

Do 1More PistonBuds Pro have low latency/gaming mode?

Yes, the 1More PistonBuds Pro have a low latency/gaming mode.

How to know when 1More PistonBuds Pro are fully charged?

The earbuds take about 1.5 hours to charge, so after that time, they should be fully charged.

Can 1More PistonBuds Pro connect to PC and Laptop?

Yes, the 1More PistonBuds Pro can connect to PCs, laptops, and tablets.

We hope you now know how to operate the earphone from the above 1More PistonBuds Pro Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the 1More company, all your information can be found on its Contact Us Page, where you can find numbers and emails available for several countries, and a Support page with all the information you will ever need! Also, 1more provides in-depth instructions and troubleshooting problems on this page.