AfterShokz Aeropex Manual | Pairing & Charging Instructions

The AfterShokz Aeropex have a playtime of 8 hours, the amazing IPX7 water-resistant certification, meaning that they not only are they against water but they are also protected against the effects of immersion, A2DP, AVRCP, HSP, HFP as compatible profiles, bone conduction transducers drivers, and much more. Learn how to use them with this new AfterShokz Aeropex Manual.

AfterShokz Aeropex Manual | Everything You Need To Know!

AfterShokz Aeropex Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Press and hold the “+” button until you hear the voice prompt “Pairing”, and a red and blue light starts flashing.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “AfterShokz Aeropex”. If a password is needed, type “0000”.

Step 4: After that, you hear the voice prompt “Connected”, a blue light will flash for 1 second, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Press and hold the “+” button until you hear the voice prompt “Pairing”, and a red and blue light starts flashing.

Step 7: Select “AfterShokz Aeropex”. If a password is needed, type “0000”.

Step 8: After that, you hear the voice prompt “Connected”, a blue light will flash for 1 second, and the pairing will be done.

AfterShokz Aeropex Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

AfterShokz Aeropex Manual | How to Turn On and Off?

Turn on: Press and hold the “+” (or power) multifunction touch button on the earbuds for 2 seconds. After that, the earbuds will turn on.

Turn off: Press and hold the “+” (or power) multifunction touch button on the earbuds for 3 seconds. After that, the earbuds will turn off.

How to Control? / How to Operate? – Instructions

Multifunction touch button

• Play or pause music: Press the multifunction touch button on the earbuds one time.
• Play the next song: Press the multifunction touch button on the earbuds two times.
• Play the previous song: Press the multifunction touch button on the earbuds three times.
• Answer an incoming call: Press the multifunction touch button on the earbuds one time.
• End a current call: Press the multifunction touch button on the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on the earbuds for about 2 seconds.
• Answer a waiting call and end the current call: Press and hold the multifunction touch button on the earbuds for about 2 seconds.
• Redial last number: Press the multifunction touch button on the earbuds two times.
• Activate the voice assistant: Press and hold the multifunction touch button on the earbuds for about 2 seconds.

“+” (or power) and “-“ multifunction touch button

• Mute a call: Press and hold the “+” and “-“ multifunction touch buttons on the earbuds for about 2 seconds while on a call.
• Change the EQ setting: Press and hold the “+” and “-“ multifunction touch buttons on the earbuds for about 3 seconds while playing music.
• Turn the volume up: Press the “+” multifunction touch button on the earbuds.
• Turn the volume down: Press the “-” multifunction touch button on the earbuds.

AfterShokz Aeropex Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the AfterShokz Aeropex, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

AfterShokz Aeropex Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

AfterShokz Aeropex Manual | How to Reset?

Step 1: Delete the “AfterShokz Aeropex” earbuds device from Bluetooth list on your phone.

Step 2: Press and hold the “+” button until you hear the voice prompt “Pairing”, and a red and blue light starts flashing.

Step 3: Press and hold the multifunction touch button, the “+” and “-“ buttons for about 3 to 5 seconds, or until you hear two beeps or feel vibrations.

Step 4: Press and hold the “+” (or power) multifunction touch button on the earbuds for 3 seconds. After that, the earbuds will turn off. After that, the resetting will be done.

AfterShokz Aeropex Manual | LED Light Status

Earbuds

• Red and blue light flashing: Earbuds are ready to pair.
• Blue light flashes one time: Earbuds connected to device.
• Red light on: Earbuds charging.
• Blue light on: Earbuds fully charged.
• Red light flashing every 2 minutes: Earbuds have low battery.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

AfterShokz Aeropex earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above AfterShokz Aeropex Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.