Altec Lansing NanoPods Manual | Pairing & Charging Instructions

The Altec Lansing NanoPods have a battery life of about 4 hours + 16 using the charging case, Bluetooth 5.0, the IPX5 sweat and dust-proof certification, a working range of 50ft, and more. Learn how to use them with this new Altec Lansing NanoPods Manual.

Altec Lansing NanoPods Manual | All You Need To Know!

Altec Lansing NanoPods Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, a light will light up on the earbuds, and they will turn on automatically.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “NanoPods”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case and take the earbuds out. After that, a light will light up on the earbuds, and they will turn on automatically.

Step 6: Select “NanoPods”. If a password is needed, type “0000”.

Step 7: After that, the pairing will be done.

Altec Lansing NanoPods Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Altec Lansing NanoPods Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, a light will light up on the earbuds, and they will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press and hold the multifunction touch button on the right earbud for about 2 seconds.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the left earbud two times.
• Turn the volume up: Press the multifunction touch button on the right earbud one time.
• Turn the volume down: Press the multifunction touch button on the left earbud one time.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
• Reject an incoming call: Press the multifunction touch button on any of the earbuds two times.
• Activate the voice assistant: Press and hold the multifunction touch button on the left earbud for about 2 seconds.

Altec Lansing NanoPods Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Altec Lansing NanoPods Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Altec Lansing NanoPods Manual | LED Light Status

Earbuds

• A light turns on when taken out of the charging case: The earbuds turn on.
• A red light turns on while on the charging case: The earbuds are charging.
• A red light turns off while on the charging case: The earbuds are fully charged.
• A blue light flashing three times: The earbuds are resetting.
• A red light turns blue: The earbuds are resetting.

Charging case

• One light flashing while charging: The case has less than 25% of the battery.
• One light on and one flashing while charging: The case has less than 50% of the battery.
• Two lights on and one flashing while charging: The case has less than 75% of the battery.
• Three lights on and one flashing while charging: The case has less than 100% of the battery.
• All lights on while charging: The case is fully charged.
• One light flashing: The case has less than 25% of the battery.
• One light on and one flashing: The case has less than 50% of the battery.
• Two lights on and one flashing: The case has less than 75% of the battery.
• Three lights on and one flashing: The case has less than 100% of the battery.
• All lights on: The case is fully charged.

Altec Lansing NanoPods Manual | How to Reset?

Step 1: Delete all pairing records of the “NanoPods” from the connected device.

Step 2: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically.

Step 3: Press and hold the multifunction touch button on both earbuds for about 9 seconds. After that, a blue light will flash three times, to then turn red and back to blue.

Step 4: Place the earphones back in the charging case. After that, the resetting will be done.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Altec Lansing NanoPods Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.