ALWUP i9 Manual | Pairing & Charging Instructions 2022

The ALWUP i9 have a working range of about 10 to 15 meters, CVC 6.0 technology, 4 to 6 hours of playtime, Bluetooth 5.0, a charging case with a 400mAh battery, and much more. Learn how to use them with this new ALWUP i9 Manual.

ALWUP i9 Manual Instructions | This Is All You Need To Know

ALWUP i9 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically.

When a red and blue light starts flashing in one of the earbuds, it means that they will be ready to pair with any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “i9”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically.

When a red and blue light starts flashing in one of the earbuds, it means that they will be ready to pair with any device.

Step 6: Select “i9”. If a password is needed, type “0000”.

Step 7: After that, the pairing will be done.

ALWUP i9 Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

ALWUP i9 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Turn the volume up: Press the multifunction touch button on the right earbud two times, and then press and hold for 6 seconds.
• Turn the volume down: Press the multifunction touch button on the left earbud two times, and then press and hold for 6 seconds.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Call the most recent dialing number: While not playing any music, press the multifunction touch button on any of the earbuds two times.
• Change the current call from the earbuds to the smartphone: During a call, press the multifunction touch button on any of the earbuds two times.
• Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds.

ALWUP i9 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the ALWUP i9, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

ALWUP i9 Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

ALWUP i9 Manual | LED Light Status

Earbuds

• Red and blue light starts flashing in one of the earbuds: The earbuds are ready to pair with any device.
• Red light while charging: The earbuds are charging.
• Blue light while charging: The earbuds are fully charged.

Charging case

• Red light while charging: The case is charging.
• Blue light while charging: The case is fully charged.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

ALWUP i9 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above ALWUP i9 Manual. Want to know anything about them? Do not hesitate to ask in the comments section.