Anbes-359-Manual-5

Anbes 359 Manual | Pairing & Charging Instructions 2022

Aliexpress banner

The Anbes 359 have a battery life of about 5 hours + 15 using the charging case, the IPX5 certification, Bluetooth 5.0, the HSP, HFP, A2DP, and AVRCP Bluetooth profiles, and more. Learn how to use them with this new Anbes 359 Manual.

Anbes 359 Manual | Pairing & Charging Instructions

Anbes 359 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Slide the black layer over the grey area and take the earbuds out. After that, you will hear the “power on, tws connected” voice prompt, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 4 seconds.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “R18”. If a password is needed, type “0000”.

Step 5: After that, you will hear the “connected” voice prompt, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Slide the black layer over the grey area and take the earbuds out. After that, you will hear the “power on, tws connected” voice prompt, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 4 seconds.

Step 7: Select “R18”. If a password is needed, type “0000”.

Step 8: After that, you will hear the “connected” voice prompt, and the pairing will be done.

Anbes-359-Manual-1
Credits: manualslib.com

Anbes 359 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Anbes 359 Manual | How to Turn On and Off?

Turn on: Slide the black layer over the grey area and take the earbuds out. After that, you will hear the “power on, tws connected” voice prompt, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 4 seconds.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Anbes-359-Manual-2
Credits: Unbox Junkie

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds one time.
  • Turn the volume up: Press the multifunction touch button on the right earbud two times.
  • Turn the volume down: Press the multifunction touch button on the left earbud two times.
  • Play the next song: Press and hold the multifunction touch button on the right earbud for about 2 seconds.
  • Play the previous song: Press and hold the multifunction touch button on the left earbud for about 2 seconds.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds one time.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds.
Anbes-359-Manual-3
Credits: manualslib.com

Anbes 359 Manual | How to Activate Mono Mode?

Step 1: Take the desired earbud from the charging case.

Step 2: Power it off by pressing and holding the multifunction touch button on both earbuds for about 4 seconds.

Step 3: Press and hold its multifunction touch button for 4 seconds, and it will be ready to use.

Step 4: Turn on the Bluetooth on the desired device.

Step 5: Go to the device’s Bluetooth settings.

Step 6: Select “R18-R” or “R18-L”. If a password is needed, type “0000”.

Step 7: After that, you will hear the “connected” voice prompt, and the pairing will be done.

Anbes 359 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Anbes-359-Manual-4
Credits: Scarbir

Anbes 359 Manual | How to Reset?

Step 1: Delete all “R18” pairing information of the connected device.

Step 2: Turn off the Bluetooth on the connected device.

Step 3: With the earbuds outside of the charging case, press and hold the multifunction touch button on both earbuds for 4 seconds to turn them off.

Step 4: Press and hold the multifunction touch button on both earbuds for 6 seconds to turn them off.

Step 5: Place both earbuds into the charging case. After that, the resetting will be done.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Anbes-359-Manual-5
Credits: Scarbir

FAQs

Are Anbes 359 waterproof?

No, the Anbes 359 are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

Does Anbes 359 have a microphone?

Yes, the Anbes 359 have integrated microphones.

Does Anbes 359 have a low latency/gaming mode?

No, the Anbes 359 don’t have a low latency/gaming mode.

Can Anbes 359 connect to PC and Laptop?

Yes, the Anbes 359 can connect to PCs, laptops, and tablets.

Are Anbes 359 noise canceling?

No! These earbuds don’t come with noise cancellation technology.

We hope you now know how to operate the earphone from the above Anbes 359 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.