Anker Soundcore Liberty 3 Pro | In-depth Guide

The Anker Soundcore Liberty 3 Pro earbuds come with ANC, a battery life of about 7 hours + 23 hours using the charging case, the IPX4 sweat and dust-proof certification, Bluetooth 5.2, 10 meters of working range, and much more. Learn how to use these earbuds using this manual!

Anker Soundcore Liberty 3 Pro | Pairing & Troubleshooting

How to Pair The Earbuds?

To iOS and Android Phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, you can press the touch panel on both earbuds for about 3 seconds.

Two lights will start flashing inside the charging case, and the earbuds will be ready to pair with any device.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Soundcore Liberty 3 Pro”. If a password is needed, type “0000”. After that, the two lights inside the charging case will pulse white, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, you can press the touch panel on both earbuds for about 3 seconds.

Two lights will start flashing inside the charging case, and the earbuds will be ready to pair with any device.

Step 6: Select “Soundcore Liberty 3 Pro”. If a password is needed, type “0000”. After that, the two lights inside the charging case will pulse white, and the pairing will be done.

Manual Pairing

Step 1: Place the earbuds into the charging case and keep the lid open.

Step 2: Press and hold the multifunction touch button on the back of the charging case for about 3 seconds, until the lights inside the case start flashing white.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select “Soundcore Liberty 3 Pro”. If a password is needed, type “0000”. After that, the two lights inside the charging case will pulse white, and the pairing will be done.

Multipoint Connection

Step 1: Go to the Soundcore app.

Step 2: Enable the “Dual device connection” feature.

Step 3: Connect to the second device on the app.

Step 4: Press and hold the touch panel on both earbuds for about 5 seconds.

Step 5: Select “Soundcore Liberty 3 Pro”. If a password is needed, type “0000”.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the earbuds into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, you can press the touch panel on both earbuds for about 3 seconds.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the touch panel on the right earbud two times.
• Play the next song: Press the touch panel on the left earbud two times.
• Answer an incoming call: Press the touch panel on any of the earbuds two times.
• End a current call: Press the touch panel on any of the earbuds two times.
• Reject an incoming call: Press and hold the touch panel on any of the earbuds for about 1 second.
• Activate the voice assistant: Press the touch panel on the left earbud two times.

How to Switch Between Ambient Sound Modes?

To switch between the different ambient sound modes on these earbuds (HearID ANC, Transparency, and Normal), all you have to do is to press and hold the touch panel on any of the earbuds for about 2 seconds.

How to Control On Mono Mode?

• Play or pause music: Press the touch panel on the earbud two times.
• Answer an incoming call: Press the touch panel on the earbud two times.
• End a current call: Press the touch panel on the earbud two times.
• Reject an incoming call: Press and hold the touch panel on any of the earbuds for about 1 second.
• Activate the voice assistant: Press and hold the touch panel on the earbud for about 1 second.

How to Switch Between Ambient Sound Modes?

To switch between the different ambient sound modes on mono mode (HearID ANC, Transparency, and Normal), all you have to do is to press the touch panel on the earbud three times.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, it can be charged using a wireless charger.

What Do The Lights Mean?

Charging case

• Two white lights flashing inside: The earbuds are ready to pair with any device.
• Two white lights pulsing inside: The earbuds are now paired.
• One light flashing: The case has less than 30% of battery.
• One light on and one flashing: The case has between 30% and 70% of battery.
• Two lights on and one flashing: The case has between 70% and 95% of battery.
• Three lights on: The case has more than 95% of battery.
• Two lights flash three times: The earbuds are resetting.

How to Reset The Earbuds?

Step 1: Delete all “Soundcore Liberty 3 Pro” pairing information from the connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press and hold the button on the back of the charging case for about 10 seconds, until the lights inside the case flash three times. After that, the resetting will be done.

A Guide To The Anker Soundcore Liberty 3 Pro App

The Anker Soundcore Liberty 3 Pro can be used with an application, called Soundcore. This application is available on the App Store and Play Store for iOS and Android devices. 

• First page: The first page of this application is the home page, where you can see the battery percentage of both earbuds, as well as the Ambient Sound, Tip Fit Test, and equalizer settings and controls.
• Second page: Not only will you be able to see the controls available on the earbuds, but they can also be activated, deactivated, or changed if desired.
• Third page: Here, not only can you see the types of sounds that can be used with the earbuds, but you can choose one depending on the tastes of each user.
• Fourth page: In addition to having information, this application also has the possibility of helping to make sound tests, to make sure that the earbuds work correctly.

How to Update The Earbud’s Firmware?

Step 1: Open the Soundcore app.

Step 2: Connect the Anker Soundcore Liberty 3 Pro to the app.

Step 3: Go to “More Settings”.

Step 4: Go to “Update Firmware”.

Step 5: Place the earbuds into the charging case and keep its lid open.

Step 6: If an update is available, press “Update”. After the updating ends, take the earbuds out of the charging case and it will be done.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Anker Soundcore Liberty 3 Pro manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.