Anker Soundcore Liberty Air 2 Manual | Step-by-step Guide

The Anker Soundcore Liberty Air 2 earbuds come with specs such as a battery life of about 7 hours + 28 using the charging case, Bluetooth 5.0, support for the SBC, AAC, and aptX audio codecs, two 6mm diamond coated drivers, app support, the IPX5 dust and sweat-proof certification, and much more. Learn how to use these earbuds using this manual!

Anker Soundcore Liberty Air 2 | In-depth Guide

How to Pair The Earbuds?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, a white light will flash one time, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch area on any of the earbuds for about 2 seconds.

A white light will start flashing as the right earbud pairs with the left one. When the light stays on for one second, they will be ready to pair with any device.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select the Anker Soundcore Liberty Air 2. If a password is needed, type “0000”. After that, a white light will start flashing quickly on the earbuds.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, a white light will flash one time, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch area on any of the earbuds for about 2 seconds.

A white light will start flashing as the right earbud pairs with the left one. When the light stays on for one second, they will be ready to pair with any device.

Step 6: Select the Anker Soundcore Liberty Air 2. If a password is needed, type “0000”. After that, a white light will start flashing quickly on the earbuds.

When a white light starts flashing slowly on the earbuds, the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, a white light will flash one time, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch area on any of the earbuds for about 2 seconds.

Turn off: Place the earbuds into the charging case and close its lid. After that, a red light will flash one time, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch area on any of the earbuds for about 8 seconds.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch area on the right earbud two times.
• Auto-pause or play music: Take the earbuds out of the ear/place the earbud back into the ear.
• Turn the volume up or down: Customize the controls on the designated app/control the volume via the connected device.
• Play the next song: Press the multifunction touch area on the left earbud two times.
• Answer an incoming call: Press the multifunction touch area on any of the earbuds two times.
• Auto-answer an incoming call: Take the earbuds out of the charging case when an incoming call.
• End a current call: Press the multifunction touch area on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch area on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press and hold the multifunction touch area on any of the earbuds for about 2 seconds.

How to Use The Earbuds In Mono Mode?

• Play or pause music: Press the multifunction touch area on the selected earbud two times.
• Answer an incoming call: Press the multifunction touch area on the selected earbud two times.
• End a current call: Press the multifunction touch area on the selected earbud two times.
• Reject an incoming call: Press and hold the multifunction touch area on the selected earbud for about 2 seconds.
• Activate the voice assistant: Press and hold the multifunction touch area on the selected earbud for about 2 seconds.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, the case can get charged using a wireless charger.

How to Reset The Earbuds?

Step 1: Go to the device’s Bluetooth settings and forget the Anker Soundcore Liberty Air 2.

Step 2: Place the earbuds into the charging case and keep the lid open. Make sure that the earbuds are being charged.

Step 3: Press and hold the button placed on the bottom of the case for about 10 seconds, until the lights on the earbuds flash red three times. After that, the resetting will be done.

What Do The Lights Mean?

Earbuds

• A white light flashes one time: The earbuds turn on.
• A red light flashes one time: The earbuds turn on.
• A white light starts flashing when the earbuds turn on: The right earbud is pairing with the left one.
• A white light stays on for one second when the earbuds turn on: The earbuds are paired to each other.
• A white light flashing quickly: The earbuds are ready to pair with any device.
• A white light flashing slowly: The earbuds are now paired to the device.
• A red light flashes three times: The earbuds are resetting.

Charging case

• One light flashing while charging: The case has less than 30% of battery.
• One light on and one light flashing while charging: The case has between 30% and 70% of battery.
• Two lights on and one light flashing while charging: The case has more than 70% of battery.
• Three lights on while charging: The case is fully charged.
• One light flashing with the earbuds inside: The earbuds have less than 30% of battery.
• One light on and one light flashing with the earbuds inside: The earbuds have between 30% and 70% of battery.
• Two lights on and one light flashing with the earbuds inside: The earbuds have more than 70% of battery.
• Three lights on with the earbuds inside: The earbuds are fully charged.
• One light flashing after opening and closing the lid: The case has less than 30% of battery.
• One light on and one light flashing after opening and closing the lid: The case has between 30% and 70% of battery.
• Two lights on and one light flashing after opening and closing the lid: The case has more than 70% of battery.
• Three lights on after opening and closing the lid: The case is fully charged.

A Guide To The Anker Soundcore Liberty Air 2 App

The Anker Soundcore Liberty Air 2 can be used with an application, called Soundcore. This application is available on the App Store and Play Store for iOS and Android devices. 

• First page: The first page of this application is the home page, where you can see the battery percentage of both earbuds, as well as the Ambient Sound, Tip Fit Test, and equalizer settings and controls.
• Second page: Not only will you be able to see the controls available on the earbuds, but they can also be activated, deactivated, or changed if desired.
• Third page: Here, not only can you see the types of sounds that can be used with the earbuds, but you can choose one depending on the tastes of each user.
• Fourth page: In addition to having information, this application also has the possibility of helping to make sound tests, to make sure that the earbuds work correctly.

How to Update The Earbud’s Firmware?

Step 1: Open the Soundcore app.

Step 2: Connect the Anker Soundcore Liberty Air 2 earbuds to the app.

Step 3: Go to “More Settings”.

Step 4: Go to “Update Firmware”.

Step 5: Place the earbuds into the charging case and keep its lid open.

Step 6: If an update is available, press “Update”. After the updating ends, take the earbuds out of the charging case and it will be done.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Anker Soundcore Liberty Air 2 manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.