Anker Soundcore Liberty Air 2 Pro | Pairing The Earbuds

The Anker Soundcore Liberty Air 2 Pro earbuds come with a 10mm driver size, Bluetooth 5.0, a battery life of about 7 hours with ANC off and 6 hours with ANC on, a 20Hz – 20kHZ frequency response, the IPX4 sweat and dust-proof certification, and more. Learn how to use these earbuds using this manual!

Anker Soundcore Liberty Air 2 Pro | How To Pair?

How to Pair The Earbuds?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, they will turn on automatically.

When a light in one of the earbuds starts flashing quickly, and then slowly on the other earbud, it means that they are now ready to pair with any device.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Soundcore Liberty Air 2 Pro”. If a password is needed, type “0000”. After that, a white light will turn on for 1 second, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, they will turn on automatically.

When a light in one of the earbuds starts flashing quickly, and then slowly on the other earbud, it means that they are now ready to pair with any device.

Step 6: Select “Soundcore Liberty Air 2 Pro”. If a password is needed, type “0000”. After that, a white light will turn on for 1 second, and the pairing will be done.

Dual Pairing Connection

Step 1: Place the earbuds into the charging case and keep the lid open.

Step 2: Press and hold the button on the case for about 10 seconds, until a white light starts flashing, meaning that the earbuds are now in pairing mode.

Step 3: Turn on Bluetooth on the second device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select “Soundcore Liberty Air 2 Pro”. If a password is needed, type “0000”. After that, a white light will turn on for 1 second, and the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, they will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on the left earbud one time.
• Play the next song: Press the multifunction touch button on the right earbud three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• Answer a second call and put the current call on hold: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

How to Activate The ANC Mode?

To activate or deactivate the ANC mode in these earbuds, all you have to do is to press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

How to Activate The Transparency Mode?

To activate or deactivate the transparency mode in these earbuds, all you have to do is to press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, it can be charged using a wireless charger.

How to Reset The Earbuds?

Step 1: Delete all “Soundcore Liberty Air 2 Pro” pairing information from the connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press and hold the button on the case for about 10 seconds, until a red light flashes three times, and turns white.

Step 4: Wait until a light in one of the earbuds starts flashing quickly, and then slowly on the other earbud. After that, the resetting will be done.

What Do The Lights Mean?

Earbuds

• A light on for 1 second: The earbuds turn on.
• A light in one of the earbuds starts flashing quickly, and then slowly on the other earbud: The earbuds are ready to pair with any device.
• A white light on for 1 second: The earbuds are now connected.
• A red light flashes three times, and turns white: The earbuds are resetting.
• A light in one of the earbuds starts flashing quickly, and then slowly on the other earbud while resetting: The resetting is done.

Charging case

• One light flashing while charging: The case has less than 30% of battery.
• One light on and one light flashing while charging: The case has between 30% and 70% of battery.
• Two lights on and one light flashing while charging: The case has more than 70% of battery.
• Three lights on while charging: The case is fully charged.
• One light flashing with the earbuds inside: The earbuds have less than 30% of battery.
• One light on and one light flashing with the earbuds inside: The earbuds have between 30% and 70% of battery.
• Two lights on and one light flashing with the earbuds inside: The earbuds have more than 70% of battery.
• Three lights on with the earbuds inside: The earbuds are fully charged.

A Guide To The Anker Soundcore Liberty Air 2 Pro App

The Anker Soundcore Liberty Air 2 Pro can be used with an application, called Soundcore. This application is available on the App Store and Play Store for iOS and Android devices. 

• First page: The first page of this application is the home page, where you can see the battery percentage of both earbuds, as well as the Ambient Sound, Tip Fit Test, and equalizer settings and controls.
• Second page: Not only will you be able to see the controls available on the earbuds, but they can also be activated, deactivated, or changed if desired.
• Third page: Here, not only can you see the types of sounds that can be used with the earbuds, but you can choose one depending on the tastes of each user.
• Fourth page: In addition to having information, this application also has the possibility of helping to make sound tests, to make sure that the earbuds work correctly.

How to Update The Earbud’s Firmware?

Step 1: Open the Soundcore app.

Step 2: Connect the Anker Soundcore Liberty Air 2 Pro to the app.

Step 3: Go to “More Settings”.

Step 4: Go to “Update Firmware”.

Step 5: Place the earbuds into the charging case and keep its lid open.

Step 6: If an update is available, press “Update”. After the updating ends, take the earbuds out of the charging case and it will be done.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Anker Soundcore Liberty Air 2 Pro manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Soundcore company, all your information can be found on its Support Page, where you can find numbers and emails available for several countries!