Anker Soundcore Life P2 Earbuds Manual | How To Pair?

The Anker Soundcore Life P2 earbuds have a battery life of about 7 hours, Bluetooth 5.0, two 6mm drivers, 10 meters of working range, the amazing IPX7 waterproof certification, 2 hours of charging time, and much more. Learn how to use these earbuds using this manual!

Anker Soundcore Life P2 | Earbuds Guide

How to Pair The Earbuds?

To iOS and Android Phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, a white light will be on for one second, and they will turn on automatically. Also, you can press the multifunction touch button on any of the earbuds.

A white light will start flashing, meaning that the earbuds are paired with each other. When a white light stays on for one second, they will be connected.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Soundcore Life P2”, and a white light will start flashing. If a password is needed, type “0000”. After that, a white light will stay on for one second, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case and take the earbuds out. After that, a white light will be on for one second, and they will turn on automatically. Also, you can press the multifunction touch button on any of the earbuds.

A white light will start flashing, meaning that the earbuds are paired with each other. When a white light stays on for one second, they will be connected.

Step 6: Select “Soundcore Life P2”, and a white light will start flashing. If a password is needed, type “0000”. After that, a white light will stay on for one second, and the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the earbuds into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, a white light will be on for one second, and they will turn on automatically. Also, you can press the multifunction touch button on any of the earbuds.

Turn off: Place the earbuds into the charging case. After that, a red light will be on for one second, and they will turn off automatically. Also, you can press and hold the multifunction touch button on any of the earbuds for about 3 seconds.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction button on any of the earbuds for about 1 second.
• Activate the voice assistant: Press the multifunction button on the left earbud two times.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

What Do The Lights Mean?

Earbuds

• A white light on for one second: The earbuds turn on.
• A red light on for one second: The earbuds turn off.
• A white light flashing: The earbuds are pairing to each other/with the desired device.
• A white light on for one second: The earbuds are now paired to each other/to the device.
• A red light flashes three times and turns white: The earbuds are resetting.

Charging case

• A white light on with the earbuds inside: The earbuds are charging.
• The white light turns off with the earbuds inside: The earbuds are fully charged.
• A white light on while charging: The case is charging.
• The white light turns off while charging: The case is fully charged.

How to Reset The Earbuds?

Step 1: Delete all “Soundcore Life P2” pairing information from the connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press and hold the multifunction touch button on both earbuds for about 3 seconds, until a red light flashes three times and turns white. After that, the resetting will be done.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Anker Soundcore Life P2 manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.