Anybuds-Dots-Manual-7

Anybuds Dots Manual | Instructions & Troubleshooting

The Anybuds Dots earbuds come with specs such as dust and sweat-proof IPX5 certification, a total weight of around 35 grams, Bluetooth 5.3 technology, built-in microphones and 6mm drivers on each earbud, a total battery life of up to 30 hours, a charging time of only 1.5 hours, and much more. Learn how to use these earbuds using this Anybuds Dots manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

Anybuds Dots Specs Sheet

ModelAnybuds Dots
WeightEarbuds and charging case: Around 35 grams
Waterproof/IP ratings  IPX5
Bluetooth version          V5.3
Range/Distance10 meters
Connectivity Port/Charging CableType-C
Audio Decoding               SBC
Driver  6mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: Around 10 hours
Charging case: Around 20 hours
Charging Time  Earbuds: Around 1.5 hours
Charging case: Around 1.5 hours
App Support     No                                  
Controls/Features         Play and pause a song, play the next and previous song, answer, end, and reject a call, turn the volume up and down, voice assistant
Accessories       Charging case, USB cable, user manual, ear tips, quick guide
PriceAround 30 USD

Anybuds Dots Accessories

The earbuds come with the following accessories:

  • Charging case.
  • USB cable.
  • User manual.
  • Ear tips.
  • Quick guide.
Anybuds-Dots-Manual-1

Anybuds Dots Manual | User Step-by-step Guide

How To Control These Earbuds?

NOTE: The multifunction touch panel is placed on the middle part of the body of the earbuds.

  • Play and pause a song: Press the multifunction touch panel on any of the earbuds one time.
  • Play the next song: Press the multifunction touch panel on the right earbud two times.
  • Play the previous song: Press the multifunction touch panel on the left earbud two times.
  • Turn the volume up: Press and hold the multifunction touch panel on the right earbud.
  • Turn the volume down: Press and hold the multifunction touch panel on the left earbud.
  • Answer an incoming call: Press the multifunction touch panel on any of the earbuds two times.
  • End a current call: Press and hold the multifunction touch panel on any of the earbuds for about 2 seconds.
  • Reject an incoming call: Press and hold the multifunction touch panel on any of the earbuds for about 2 seconds.
Anybuds-Dots-Manual-2

How To Reset And Re-Pair These Earbuds?

Step 1: Delete the Anybuds Dots earbuds from the devices’ Bluetooth list.

Step 2: Turn off Bluetooth.

Step 3: Take the earbuds out of the case.

Step 4: When a red and blue light starts flashing, press the multifunction touch panel on any of the earbuds five times.

If a red light stays on for a long time and then turns off, and the earbuds are turned off, it indicates that the factory settings have been successfully restored.

Step 5: Turn on Bluetooth.

Step 6: Search for a new device.

Step 7: Select the Anybuds Dots earbuds. If a password is needed, type “0000” or “1234”.

After that, the flashing light will turn off, and the pairing will be done.

Anybuds-Dots-Manual-3

What Do The Lights Mean?

Earbuds

  • A blue light on for 1 second: The earbuds turn on.
  • A red light on for 1 second: The earbuds turn off.
  • A red and blue light flashes: The earbuds are in pairing mode.
  • Said red and blue light turns off: The earbuds are now connected.
  • A red light on while on the charging case: The earbuds are charging.
  • Said red light turns off while on the charging case: The earbuds are charging.
  • A red light stays on for a long time and then turns off: The earbuds are resetting.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

Anybuds-Dots-Manual-4

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, a blue light will be on for 1 second, and the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch panel on both earbuds for about 3 seconds. After that, a blue light will be on for 1 second, and the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, a red light will be on for 1 second, and the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch panel on both earbuds for about 5 seconds. After that, a red light will be on for 1 second, and the earbuds will turn off.

Anybuds-Dots-Manual-5

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, a blue light will be on for 1 second, and the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing, meaning that the earbuds will now be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Anybuds Dots earbuds. If a password is needed, type “0000” or “1234”.

After that, the flashing light will turn off, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, a blue light will be on for 1 second, and the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing, meaning that the earbuds will now be ready to pair with any device.

Step 7: Select the Anybuds Dots earbuds. If a password is needed, type “0000” or “1234”.

After that, the flashing light will turn off, and the pairing will be done.

Anybuds-Dots-Manual-6

Do These Earbuds Have An App?

No! These earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Anybuds-Dots-Manual-7

FAQs

Do the Anybuds Dots have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Anybuds Dots have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Anybuds Dots connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Anybuds Dots noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

Are the Anybuds Dots waterproof?

No, these earbuds are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

We hope you now know how to operate the earbuds from the above Anybuds Dots manual. Want to know anything about the earphones? Do not hesitate to ask in the comment section below.