The Apple AirPods 3 have up to 6 hours of battery life, Bluetooth 5.0, a custom high-excursion Apple driver, Adaptive EQ, dual beamforming microphones, a H1 headphone chip, and much more. Learn how to use them with this new Apple AirPods 3 Manual. Apple AirPods 3 Manual | All You Need To Know! Apple AirPods 3 Manual | How to Pair / Connect? To iOS phones Step 1: Connect to Wi-Fi and turn on Bluetooth. Step 2: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 3: Hold the earbuds close to the device. Apple devices signed in to iCloud will pair automatically. Step 4: After that, the pairing will be done. - To Android phones Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 2: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device. Step 3: Go to the device’s Bluetooth settings. Step 4: Select “Apple AirPods 3”. If a password is needed, type “0000”. Step 5: After that, the pairing will be done. To PC (Windows) Step 1: Turn on Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 6: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device. Step 7: Select “Apple AirPods 3”. If a password is needed, type “0000”. Step 8: After that, the pairing will be done. - Apple AirPods 3 Manual | How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. Apple AirPods 3 Manual | How to Turn On and Off? Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. - How to Control? / How to Operate? – Instructions • Play or pause music: Press the multifunction touch button on any of the earbuds one time. • Play the next song: Press the multifunction touch button on any of the earbuds two times. • Play the previous song: Press the multifunction touch button on any of the earbuds three times. • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time. • End a current call: Press the multifunction touch button on any of the earbuds one time. • Reject an incoming call: Press the multifunction touch button on any of the earbuds two times. • Answer a second call and put the first one on hold: Press the multifunction touch button on any of the earbuds one time. • Change between a current and a second call: Press the multifunction touch button on any of the earbuds one time. • End the current call and answer the one on hold: Press the multifunction touch button on any of the earbuds two times. • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds. Apple AirPods 3 Manual | How to Activate Mono Mode? To activate or deactivate the mono mode in the Apple AirPods 3, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. - Apple AirPods 3 Manual | How to Reset? Step 1: Delete the Apple AirPods 3 from the connected devices list on the device’s Bluetooth. Step 2: Place both earbuds into the charging case and keep the lid open. Step 3: Press the button placed on the back of the case for about 15 seconds. After that, an orange light will turn on, and the resetting will be done. Apple AirPods 3 Manual | How to Charge? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, you can place the case with the LED light facing up on a MagSafe or Qi-certifies charger. - Apple AirPods 3 Manual | LED Light Status Earbuds • Green light on: The earbuds are fully charged. • Orange light on: The earbuds have less than half of their battery. Charging case • A light flashing: The earbuds are ready to pair with any device. • Orange light on when resetting: Earbuds resetting. • Green light on in the front of the case: Case has all of its battery. • Orange light on in the front of the case: Case has less than half of its battery. • Green light on in the inside the case: The earbuds have all of their battery. Apple AirPods Manual | How to Update the Firmware? Step 1: Take the earbuds out of the charging case. Step 2: Connect the Apple AirPods 3 to the desired device. Step 3: Press on the “Configuration” tab. Step 4: Open the “General” tab. Step 5: Open the “Information” tab. Step 6: Press on the “Apple AirPods 3” device. Step 7: Check the firmware number. In case there is an update, press "Update Firmware". Step 8: Place the earbuds into the charging case. Step 9: Connect the case to a charger or charging port. Step 10: Wait until a notification pops up on the device saying that the update finished. -7

Apple AirPods 3 Manual | Step-by-step Guide 2022

The Apple AirPods 3 have up to 6 hours of battery life, Bluetooth 5.0, a custom high-excursion Apple driver, Adaptive EQ, dual beamforming microphones, an H1 headphone chip, and much more. Learn how to use them with this new Apple AirPods 3 Manual.

Apple AirPods 3 Manual | Everything You Need To Know!

Apple AirPods 3 Manual | How to Pair / Connect?

To iOS phones

Step 1: Connect to Wi-Fi and turn on Bluetooth.

Step 2: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 3: Hold the earbuds close to the device. Apple devices signed in to iCloud will pair automatically.

Step 4: After that, the pairing will be done.

Apple-AirPods-3-Manual-1
Credits: support.apple.com

To Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: With the earbuds inside the case, press and hold the button on the back of the case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Apple AirPods 3”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 6: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device.

Step 7: Select “Apple AirPods 3”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Apple-AirPods-3-Manual-2
Credits: support.apple.com

Apple AirPods 3 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Apple AirPods 3 Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

The Apple AirPods 3 have up to 6 hours of battery life, Bluetooth 5.0, a custom high-excursion Apple driver, Adaptive EQ, dual beamforming microphones, a H1 headphone chip, and much more. Learn how to use them with this new Apple AirPods 3 Manual. Apple AirPods 3 Manual | All You Need To Know! Apple AirPods 3 Manual | How to Pair / Connect? To iOS phones Step 1: Connect to Wi-Fi and turn on Bluetooth. Step 2: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 3: Hold the earbuds close to the device. Apple devices signed in to iCloud will pair automatically. Step 4: After that, the pairing will be done. - To Android phones Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 2: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device. Step 3: Go to the device’s Bluetooth settings. Step 4: Select “Apple AirPods 3”. If a password is needed, type “0000”. Step 5: After that, the pairing will be done. To PC (Windows) Step 1: Turn on Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 6: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device. Step 7: Select “Apple AirPods 3”. If a password is needed, type “0000”. Step 8: After that, the pairing will be done. - Apple AirPods 3 Manual | How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. Apple AirPods 3 Manual | How to Turn On and Off? Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. - How to Control? / How to Operate? – Instructions • Play or pause music: Press the multifunction touch button on any of the earbuds one time. • Play the next song: Press the multifunction touch button on any of the earbuds two times. • Play the previous song: Press the multifunction touch button on any of the earbuds three times. • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time. • End a current call: Press the multifunction touch button on any of the earbuds one time. • Reject an incoming call: Press the multifunction touch button on any of the earbuds two times. • Answer a second call and put the first one on hold: Press the multifunction touch button on any of the earbuds one time. • Change between a current and a second call: Press the multifunction touch button on any of the earbuds one time. • End the current call and answer the one on hold: Press the multifunction touch button on any of the earbuds two times. • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds. Apple AirPods 3 Manual | How to Activate Mono Mode? To activate or deactivate the mono mode in the Apple AirPods 3, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. - Apple AirPods 3 Manual | How to Reset? Step 1: Delete the Apple AirPods 3 from the connected devices list on the device’s Bluetooth. Step 2: Place both earbuds into the charging case and keep the lid open. Step 3: Press the button placed on the back of the case for about 15 seconds. After that, an orange light will turn on, and the resetting will be done. Apple AirPods 3 Manual | How to Charge? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, you can place the case with the LED light facing up on a MagSafe or Qi-certifies charger. - Apple AirPods 3 Manual | LED Light Status Earbuds • Green light on: The earbuds are fully charged. • Orange light on: The earbuds have less than half of their battery. Charging case • A light flashing: The earbuds are ready to pair with any device. • Orange light on when resetting: Earbuds resetting. • Green light on in the front of the case: Case has all of its battery. • Orange light on in the front of the case: Case has less than half of its battery. • Green light on in the inside the case: The earbuds have all of their battery. Apple AirPods Manual | How to Update the Firmware? Step 1: Take the earbuds out of the charging case. Step 2: Connect the Apple AirPods 3 to the desired device. Step 3: Press on the “Configuration” tab. Step 4: Open the “General” tab. Step 5: Open the “Information” tab. Step 6: Press on the “Apple AirPods 3” device. Step 7: Check the firmware number. In case there is an update, press "Update Firmware". Step 8: Place the earbuds into the charging case. Step 9: Connect the case to a charger or charging port. Step 10: Wait until a notification pops up on the device saying that the update finished. -3
Credits: applesfera.com

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds one time.
  • Play the next song: Press the multifunction touch button on any of the earbuds two times.
  • Play the previous song: Press the multifunction touch button on any of the earbuds three times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds one time.
  • Reject an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • Answer a second call and put the first one on hold: Press the multifunction touch button on any of the earbuds one time.
  • Change between a current and a second call: Press the multifunction touch button on any of the earbuds one time.
  • End the current call and answer the one on hold: Press the multifunction touch button on any of the earbuds two times.
  • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds.

Apple AirPods 3 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Apple AirPods 3, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

The Apple AirPods 3 have up to 6 hours of battery life, Bluetooth 5.0, a custom high-excursion Apple driver, Adaptive EQ, dual beamforming microphones, a H1 headphone chip, and much more. Learn how to use them with this new Apple AirPods 3 Manual. Apple AirPods 3 Manual | All You Need To Know! Apple AirPods 3 Manual | How to Pair / Connect? To iOS phones Step 1: Connect to Wi-Fi and turn on Bluetooth. Step 2: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 3: Hold the earbuds close to the device. Apple devices signed in to iCloud will pair automatically. Step 4: After that, the pairing will be done. - To Android phones Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 2: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device. Step 3: Go to the device’s Bluetooth settings. Step 4: Select “Apple AirPods 3”. If a password is needed, type “0000”. Step 5: After that, the pairing will be done. To PC (Windows) Step 1: Turn on Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 6: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device. Step 7: Select “Apple AirPods 3”. If a password is needed, type “0000”. Step 8: After that, the pairing will be done. - Apple AirPods 3 Manual | How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. Apple AirPods 3 Manual | How to Turn On and Off? Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. - How to Control? / How to Operate? – Instructions • Play or pause music: Press the multifunction touch button on any of the earbuds one time. • Play the next song: Press the multifunction touch button on any of the earbuds two times. • Play the previous song: Press the multifunction touch button on any of the earbuds three times. • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time. • End a current call: Press the multifunction touch button on any of the earbuds one time. • Reject an incoming call: Press the multifunction touch button on any of the earbuds two times. • Answer a second call and put the first one on hold: Press the multifunction touch button on any of the earbuds one time. • Change between a current and a second call: Press the multifunction touch button on any of the earbuds one time. • End the current call and answer the one on hold: Press the multifunction touch button on any of the earbuds two times. • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds. Apple AirPods 3 Manual | How to Activate Mono Mode? To activate or deactivate the mono mode in the Apple AirPods 3, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. - Apple AirPods 3 Manual | How to Reset? Step 1: Delete the Apple AirPods 3 from the connected devices list on the device’s Bluetooth. Step 2: Place both earbuds into the charging case and keep the lid open. Step 3: Press the button placed on the back of the case for about 15 seconds. After that, an orange light will turn on, and the resetting will be done. Apple AirPods 3 Manual | How to Charge? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, you can place the case with the LED light facing up on a MagSafe or Qi-certifies charger. - Apple AirPods 3 Manual | LED Light Status Earbuds • Green light on: The earbuds are fully charged. • Orange light on: The earbuds have less than half of their battery. Charging case • A light flashing: The earbuds are ready to pair with any device. • Orange light on when resetting: Earbuds resetting. • Green light on in the front of the case: Case has all of its battery. • Orange light on in the front of the case: Case has less than half of its battery. • Green light on in the inside the case: The earbuds have all of their battery. Apple AirPods Manual | How to Update the Firmware? Step 1: Take the earbuds out of the charging case. Step 2: Connect the Apple AirPods 3 to the desired device. Step 3: Press on the “Configuration” tab. Step 4: Open the “General” tab. Step 5: Open the “Information” tab. Step 6: Press on the “Apple AirPods 3” device. Step 7: Check the firmware number. In case there is an update, press "Update Firmware". Step 8: Place the earbuds into the charging case. Step 9: Connect the case to a charger or charging port. Step 10: Wait until a notification pops up on the device saying that the update finished. -4
Credits: support.apple.com

Apple AirPods 3 Manual | How to Reset?

Step 1: Delete the Apple AirPods 3 from the connected devices list on the device’s Bluetooth.

Step 2: Place both earbuds into the charging case and keep the lid open.

Step 3: Press the button placed on the back of the case for about 15 seconds. After that, an orange light will turn on, and the resetting will be done.

Apple AirPods 3 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, you can place the case with the LED light facing up on a MagSafe or Qi-certifies charger.

The Apple AirPods 3 have up to 6 hours of battery life, Bluetooth 5.0, a custom high-excursion Apple driver, Adaptive EQ, dual beamforming microphones, a H1 headphone chip, and much more. Learn how to use them with this new Apple AirPods 3 Manual. Apple AirPods 3 Manual | All You Need To Know! Apple AirPods 3 Manual | How to Pair / Connect? To iOS phones Step 1: Connect to Wi-Fi and turn on Bluetooth. Step 2: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 3: Hold the earbuds close to the device. Apple devices signed in to iCloud will pair automatically. Step 4: After that, the pairing will be done. - To Android phones Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 2: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device. Step 3: Go to the device’s Bluetooth settings. Step 4: Select “Apple AirPods 3”. If a password is needed, type “0000”. Step 5: After that, the pairing will be done. To PC (Windows) Step 1: Turn on Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 6: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device. Step 7: Select “Apple AirPods 3”. If a password is needed, type “0000”. Step 8: After that, the pairing will be done. - Apple AirPods 3 Manual | How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. Apple AirPods 3 Manual | How to Turn On and Off? Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. - How to Control? / How to Operate? – Instructions • Play or pause music: Press the multifunction touch button on any of the earbuds one time. • Play the next song: Press the multifunction touch button on any of the earbuds two times. • Play the previous song: Press the multifunction touch button on any of the earbuds three times. • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time. • End a current call: Press the multifunction touch button on any of the earbuds one time. • Reject an incoming call: Press the multifunction touch button on any of the earbuds two times. • Answer a second call and put the first one on hold: Press the multifunction touch button on any of the earbuds one time. • Change between a current and a second call: Press the multifunction touch button on any of the earbuds one time. • End the current call and answer the one on hold: Press the multifunction touch button on any of the earbuds two times. • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds. Apple AirPods 3 Manual | How to Activate Mono Mode? To activate or deactivate the mono mode in the Apple AirPods 3, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. - Apple AirPods 3 Manual | How to Reset? Step 1: Delete the Apple AirPods 3 from the connected devices list on the device’s Bluetooth. Step 2: Place both earbuds into the charging case and keep the lid open. Step 3: Press the button placed on the back of the case for about 15 seconds. After that, an orange light will turn on, and the resetting will be done. Apple AirPods 3 Manual | How to Charge? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, you can place the case with the LED light facing up on a MagSafe or Qi-certifies charger. - Apple AirPods 3 Manual | LED Light Status Earbuds • Green light on: The earbuds are fully charged. • Orange light on: The earbuds have less than half of their battery. Charging case • A light flashing: The earbuds are ready to pair with any device. • Orange light on when resetting: Earbuds resetting. • Green light on in the front of the case: Case has all of its battery. • Orange light on in the front of the case: Case has less than half of its battery. • Green light on in the inside the case: The earbuds have all of their battery. Apple AirPods Manual | How to Update the Firmware? Step 1: Take the earbuds out of the charging case. Step 2: Connect the Apple AirPods 3 to the desired device. Step 3: Press on the “Configuration” tab. Step 4: Open the “General” tab. Step 5: Open the “Information” tab. Step 6: Press on the “Apple AirPods 3” device. Step 7: Check the firmware number. In case there is an update, press "Update Firmware". Step 8: Place the earbuds into the charging case. Step 9: Connect the case to a charger or charging port. Step 10: Wait until a notification pops up on the device saying that the update finished. -5
Credits: support.apple.com

Apple AirPods 3 Manual | LED Light Status

Earbuds

  • Green light on: The earbuds are fully charged.
  • Orange light on: The earbuds have less than half of their battery.

Charging case

  • A light flashing: The earbuds are ready to pair with any device.
  • Orange light on when resetting: Earbuds resetting.
  • Green light on in the front of the case: Case has all of its battery.
  • Orange light on in the front of the case: Case has less than half of its battery.
  • Green light on in the inside the case: The earbuds have all of their battery.

Apple AirPods 3 Manual | How to Update the Firmware?

Step 1: Take the earbuds out of the charging case.

Step 2: Connect the Apple AirPods 3 to the desired device.

Step 3: Press on the “Configuration” tab.

Step 4: Open the “General” tab.

Step 5: Open the “Information” tab.

Step 6: Press on the “Apple AirPods 3” device.

Step 7: Check the firmware number. In case there is an update, press “Update Firmware”.

Step 8: Place the earbuds into the charging case.

Step 9: Connect the case to a charger or charging port.

Step 10: Wait until a notification pops up on the device saying that the update is finished.

The Apple AirPods 3 have up to 6 hours of battery life, Bluetooth 5.0, a custom high-excursion Apple driver, Adaptive EQ, dual beamforming microphones, a H1 headphone chip, and much more. Learn how to use them with this new Apple AirPods 3 Manual. Apple AirPods 3 Manual | All You Need To Know! Apple AirPods 3 Manual | How to Pair / Connect? To iOS phones Step 1: Connect to Wi-Fi and turn on Bluetooth. Step 2: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 3: Hold the earbuds close to the device. Apple devices signed in to iCloud will pair automatically. Step 4: After that, the pairing will be done. - To Android phones Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 2: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device. Step 3: Go to the device’s Bluetooth settings. Step 4: Select “Apple AirPods 3”. If a password is needed, type “0000”. Step 5: After that, the pairing will be done. To PC (Windows) Step 1: Turn on Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 6: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device. Step 7: Select “Apple AirPods 3”. If a password is needed, type “0000”. Step 8: After that, the pairing will be done. - Apple AirPods 3 Manual | How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. Apple AirPods 3 Manual | How to Turn On and Off? Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. - How to Control? / How to Operate? – Instructions • Play or pause music: Press the multifunction touch button on any of the earbuds one time. • Play the next song: Press the multifunction touch button on any of the earbuds two times. • Play the previous song: Press the multifunction touch button on any of the earbuds three times. • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time. • End a current call: Press the multifunction touch button on any of the earbuds one time. • Reject an incoming call: Press the multifunction touch button on any of the earbuds two times. • Answer a second call and put the first one on hold: Press the multifunction touch button on any of the earbuds one time. • Change between a current and a second call: Press the multifunction touch button on any of the earbuds one time. • End the current call and answer the one on hold: Press the multifunction touch button on any of the earbuds two times. • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds. Apple AirPods 3 Manual | How to Activate Mono Mode? To activate or deactivate the mono mode in the Apple AirPods 3, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. - Apple AirPods 3 Manual | How to Reset? Step 1: Delete the Apple AirPods 3 from the connected devices list on the device’s Bluetooth. Step 2: Place both earbuds into the charging case and keep the lid open. Step 3: Press the button placed on the back of the case for about 15 seconds. After that, an orange light will turn on, and the resetting will be done. Apple AirPods 3 Manual | How to Charge? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, you can place the case with the LED light facing up on a MagSafe or Qi-certifies charger. - Apple AirPods 3 Manual | LED Light Status Earbuds • Green light on: The earbuds are fully charged. • Orange light on: The earbuds have less than half of their battery. Charging case • A light flashing: The earbuds are ready to pair with any device. • Orange light on when resetting: Earbuds resetting. • Green light on in the front of the case: Case has all of its battery. • Orange light on in the front of the case: Case has less than half of its battery. • Green light on in the inside the case: The earbuds have all of their battery. Apple AirPods Manual | How to Update the Firmware? Step 1: Take the earbuds out of the charging case. Step 2: Connect the Apple AirPods 3 to the desired device. Step 3: Press on the “Configuration” tab. Step 4: Open the “General” tab. Step 5: Open the “Information” tab. Step 6: Press on the “Apple AirPods 3” device. Step 7: Check the firmware number. In case there is an update, press "Update Firmware". Step 8: Place the earbuds into the charging case. Step 9: Connect the case to a charger or charging port. Step 10: Wait until a notification pops up on the device saying that the update finished. -6
Credits: applesfera.com

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Apple AirPods 3 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

The Apple AirPods 3 have up to 6 hours of battery life, Bluetooth 5.0, a custom high-excursion Apple driver, Adaptive EQ, dual beamforming microphones, a H1 headphone chip, and much more. Learn how to use them with this new Apple AirPods 3 Manual. Apple AirPods 3 Manual | All You Need To Know! Apple AirPods 3 Manual | How to Pair / Connect? To iOS phones Step 1: Connect to Wi-Fi and turn on Bluetooth. Step 2: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 3: Hold the earbuds close to the device. Apple devices signed in to iCloud will pair automatically. Step 4: After that, the pairing will be done. - To Android phones Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 2: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device. Step 3: Go to the device’s Bluetooth settings. Step 4: Select “Apple AirPods 3”. If a password is needed, type “0000”. Step 5: After that, the pairing will be done. To PC (Windows) Step 1: Turn on Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 6: With the earbuds inside the case, press and hold the button on the back of case for a couple of seconds, until a light starts flashing. This means that the earbuds are now ready to pair with any device. Step 7: Select “Apple AirPods 3”. If a password is needed, type “0000”. Step 8: After that, the pairing will be done. - Apple AirPods 3 Manual | How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. Apple AirPods 3 Manual | How to Turn On and Off? Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. - How to Control? / How to Operate? – Instructions • Play or pause music: Press the multifunction touch button on any of the earbuds one time. • Play the next song: Press the multifunction touch button on any of the earbuds two times. • Play the previous song: Press the multifunction touch button on any of the earbuds three times. • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time. • End a current call: Press the multifunction touch button on any of the earbuds one time. • Reject an incoming call: Press the multifunction touch button on any of the earbuds two times. • Answer a second call and put the first one on hold: Press the multifunction touch button on any of the earbuds one time. • Change between a current and a second call: Press the multifunction touch button on any of the earbuds one time. • End the current call and answer the one on hold: Press the multifunction touch button on any of the earbuds two times. • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds. Apple AirPods 3 Manual | How to Activate Mono Mode? To activate or deactivate the mono mode in the Apple AirPods 3, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. - Apple AirPods 3 Manual | How to Reset? Step 1: Delete the Apple AirPods 3 from the connected devices list on the device’s Bluetooth. Step 2: Place both earbuds into the charging case and keep the lid open. Step 3: Press the button placed on the back of the case for about 15 seconds. After that, an orange light will turn on, and the resetting will be done. Apple AirPods 3 Manual | How to Charge? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, you can place the case with the LED light facing up on a MagSafe or Qi-certifies charger. - Apple AirPods 3 Manual | LED Light Status Earbuds • Green light on: The earbuds are fully charged. • Orange light on: The earbuds have less than half of their battery. Charging case • A light flashing: The earbuds are ready to pair with any device. • Orange light on when resetting: Earbuds resetting. • Green light on in the front of the case: Case has all of its battery. • Orange light on in the front of the case: Case has less than half of its battery. • Green light on in the inside the case: The earbuds have all of their battery. Apple AirPods Manual | How to Update the Firmware? Step 1: Take the earbuds out of the charging case. Step 2: Connect the Apple AirPods 3 to the desired device. Step 3: Press on the “Configuration” tab. Step 4: Open the “General” tab. Step 5: Open the “Information” tab. Step 6: Press on the “Apple AirPods 3” device. Step 7: Check the firmware number. In case there is an update, press "Update Firmware". Step 8: Place the earbuds into the charging case. Step 9: Connect the case to a charger or charging port. Step 10: Wait until a notification pops up on the device saying that the update finished. -7
Credits: applesfera.com

FAQs

Are Apple AirPods 3 waterproof?

No, the Apple AirPods 3 are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant.

Does Apple AirPods 3 have a microphone?

Yes, the Apple AirPods 3 have integrated microphones.

Do Apple AirPods 3 have low latency/gaming mode?

No! The Apple AirPods 3 don’t have a low latency/gaming mode.

Can Apple AirPods 3 connect to PC and Laptop?

Yes, the Apple AirPods 3 can connect to PCs, laptops, and tablets.

Are Apple AirPods 3 noise cancelling?

No, these earbuds don’t come with noise cancellation.

We hope you now know how to operate the earphone from the above Apple AirPods 3 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.