Aukey-EP-M1-PRO-ANC-Manual-5

Aukey EP-M1-PRO ANC | Step-by-step Pairing Manual  

The Aukey EP-M1-PRO ANC earbuds come with specs such as Bluetooth 5.0, ANC support, one 10mm dynamic driver in each earbud, about 5 hours of battery life + 25 hours using the charging case, the IPX4 sweat and dust-proof certification, and much more. Learn how to use these earbuds using this manual!

Aukey EP-M1-PRO ANC Manual | How To Pair These Earbuds?

How to Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

When a blue light starts flashing, it means that the earbuds will be ready to pair with any device.

NOTE: If the earbuds don’t enter pairing mode automatically, then press the multifunction touch button on both earbuds 5 times.

Step 2: Unlock the desired device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “AUKEY RP-M1-Pro” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

To PC (Windows)

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

When a blue light starts flashing, it means that the earbuds will be ready to pair with any device.

NOTE: If the earbuds don’t enter pairing mode automatically, then press the multifunction touch button on both earbuds 5 times.

Step 2: Unlock the desired device.

Step 3: Go to the Settings.

Step 4: Go to “Bluetooth and other devices”.

Step 5: Turn on Bluetooth on the device.

Step 6: Click on “Add device”.

Step 7: Select the “AUKEY RP-M1-Pro” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

Aukey-EP-M1-PRO-ANC-Manual-1

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the earbuds into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Aukey-EP-M1-PRO-ANC-Manual-2

How to Control These Earbuds? – Stereo Mode

  • Play or pause the music: Press the multifunction touch button on any of the earbuds one time.
  • Play the next song: Press the multifunction touch button on the right earbud two times.
  • Play the previous song: Press the multifunction touch button on the left earbud two times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a current call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

How to Activate The ANC Mode?

To activate or deactivate the ANC mode in these earbuds, all you have to do is to press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Aukey-EP-M1-PRO-ANC-Manual-4

What Do The Lights Mean?

Earbuds

  • A blue light flashing: The earbuds are now ready to pair with any device.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Aukey-EP-M1-PRO-ANC-Manual-5

FAQs

Are the Aukey EP-M1-PRO ANC waterproof?

No, the Aukey EP-M1-PRO ANC are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant.

Do the Aukey EP-M1-PRO ANC have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Aukey EP-M1-PRO ANC have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Aukey EP-M1-PRO ANC connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Aukey EP-M1-PRO ANC noise-canceling?

Yes, these earbuds come with noise-cancellation technology.

We hope you now know how to operate the earphone from the above Aukey EP-M1-PRO ANC manual. Want to know anything about the earphones? Do not hesitate to ask in the comment section below.