Aukey EP-T25 Manual | Pairing & Charging Instructions 2021

The Aukey EP-T25 have a 6mm dynamic driver, the IPX5 sweat and water-proof certification, around 5 hours listening on a full charge, up to 20 hours of music playback with the charging case, Bluetooth 5.0, HFP, A2DP, AVRCP, SBC, AAC, and much more. Learn how to use them with this new Aukey EP-T25 Manual.

Aukey EP-T25 Manual | Everything You Need To Know!

Aukey EP-T25 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. The earbuds will turn on and pair to each other automatically.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “AUKEY EP-T25”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. The earbuds will turn on and pair to each other automatically.

Step 7: Select “AUKEY EP-T25”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Aukey EP-T25 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Aukey EP-T25 Manual | How to Turn On and Off?

Turn on

Automatically: Open the lid of the charging case. After that, they will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for 4 seconds. After that, the earbuds will turn on.

Turn off

Automatically: Close the lid of the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for 6 seconds. After that, the earbuds will turn off.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a call: Press the multifunction touch button on any of the earbuds two times.
• Answer a second call and end the first one: Press the multifunction touch button on any of the earbuds two times.
• Answer a second call and put the first one on hold: Press and hold the multifunction touch button on any of the earbuds for 2 seconds.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 2 seconds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

Aukey EP-T25 Manual | How to Activate Mono Mode?

Step 1: Take the desired earbud out of the charging case. It will automatically turn on.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “AUKEY EP-T25”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

Aukey EP-T25 Manual | How to Reset?

Step 1: Take both earbuds out of the charging case.

Step 2: Press and hold the multifunction touch button on both earbuds for about 10 seconds, until a red and green light flashes 3 times simultaneously.

Step 3: Place the earbuds back into the charging case.

Step 4: After that, the resetting will be done.

Aukey EP-T25 Manual | LED Light Status

Earbuds

• Red and green light flashes 3 times simultaneously: Earbuds resetting.
• Red light on: Earbuds charging.
• Blue light on: Earbuds fully charged.

Charging case

• One light on: Less than 25% of battery.
• Two lights on: 25% to 50% of battery.
• Three lights on: 50% to 75% of battery.
• Four lights on: 75% to 100% of battery.

Aukey EP-T25 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Aukey EP-T25 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Aukey EP-T25 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Aukey company, all your information can be found on its Contact Us Page, where you can find numbers and emails available for several countries!