Aukey-EP-T27-Manual-

Aukey EP-T27 Manual | Step-by-step User Manual  

The Aukey EP-T27 earbuds come with specs such as Bluetooth 5.0 with HSP, HFP, A2DP, AVRCP, aptX, and AAC technology support, integrated microphones in each earbud, a work range of 10 meters, about 5 hours of battery life, the amazing IPX7 waterproof certification, and much more. Learn how to use these earbuds using this manual!

Aukey EP-T27 Manual & Pairing Troubleshooting

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the earbuds into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, you can press and hold the multifunction touch panel in both earbuds for about 4 seconds.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. Also, you can press and hold the multifunction touch panel in both earbuds for about 6 seconds.

Aukey-EP-T27-Manual-1

How to Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, you can press and hold the multifunction touch panel in both earbuds for about 4 seconds.

Step 2: Unlock the desired device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “AUKEY EP-T27” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

To PC (Windows)

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, you can press and hold the multifunction touch panel in both earbuds for about 4 seconds.

Step 2: Unlock the desired device.

Step 3: Go to the Settings.

Step 4: Go to “Bluetooth and other devices”.

Step 5: Turn on Bluetooth on the device.

Step 6: Click on “Add device”.

Step 7: Select the “AUKEY EP-T27” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

Aukey-EP-T27-Manual-2

How to Control These Earbuds? – Stereo Mode

  • Play or pause the music: Press the multifunction touch panel on any of the earbuds one time.
  • Play the next song: Press the multifunction touch panel on the right earbud two times
  • Play the previous song: Press the multifunction touch panel on the left earbud two times.
  • Answer an incoming call: Press the multifunction touch panel on any of the earbuds two times.
  • End a current call: Press the multifunction touch panel on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch panel on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press the multifunction touch panel on any of the earbuds three times.
Aukey-EP-T27-Manual-3

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Aukey-EP-T27-Manual-4

How to Clear The Earbuds Pairing List?

If there is a problem in the pairing process, or only one of the earbuds is working, then try clearing the earbuds pairing list by doing the following steps:

Step 1: Open the lid of the charging case and take the earbuds out. They will turn on.

Step 2: Press the multifunction touch panel on both earbuds for about 6 seconds to turn them off.

Step 3: Press the multifunction touch panel on both earbuds for about 10 seconds. The earbuds will not only turn on but also clear their pairing list and enter pairing mode automatically.

After that, the resetting process will be done.

Aukey-EP-T27-Manual-5

What Do The Lights Mean?

Earbuds

  • A red light on while on the charging case: The earbuds are charging.
  • A blue light on while on the charging case: The earbuds are fully charged.

Charging case

  • A red light on while charging: The case is charging.
  • A blue light on while charging: The case is fully charged.
  • A blue light on: The case has between 30% and 100%of battery.
  • A red light on: The case has less than 30% of battery.
Aukey-EP-T27-Manual-6

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Aukey-EP-T27-Manual-

FAQs

Are the Aukey EP-T27 waterproof?

Yes, the Aukey EP-T27 are waterproof (IPX6 and up). They have a rating of IPX7, meaning that they not only are against water but are also protected against the effects of immersion.

Do the Aukey EP-T27 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Aukey EP-T27 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Aukey EP-T27 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Aukey EP-T27 noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

How to know when the Aukey EP-T27 are fully charged?

When the earbuds are charging, a red light is on. When fully charged, said light turns blue.

We hope you now know how to operate the earphone from the above Aukey EP-T27 manual. Want to know anything about the earphones? Do not hesitate to ask in the comment section below.