Bang-&-Olufsen-Beoplay-E8-Manual-6

Bang & Olufsen Beoplay E8 Manual | Step-by-step Guide

Aliexpress banner

The Bang & Olufsen Beoplay E8 comes with Bluetooth 4.2 with AAC Codec, 5.7mm Electro-Dynamic drivers, a battery life of about 4 hours, the Transparency mode, and more. Learn how to use them with this new Bang & Olufsen Beoplay E8 Manual.

Bang & Olufsen Beoplay E8 Manual & Instructions

Bang & Olufsen Beoplay E8 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case, take the earbuds out and press on the right one. After that, a white light will turn on the earbuds, and they will turn on automatically.

Step 2: Press and hold the multifunction touch button on both earbuds for about 5 seconds. When a blue light starts flashing on the earbuds, that means that they will be ready to pair with any device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select “Beoplay E8”. If a password is needed, type “0000”.

Step 6: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case, take the earbuds out and press on the right one. After that, a white light will turn on the earbuds, and they will turn on automatically.

Step 6: Press and hold the multifunction touch button on both earbuds for about 5 seconds. When a blue light starts flashing on the earbuds, that means that they will be ready to pair with any device.

Step 7: Select “Beoplay E8”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Bang-&-Olufsen-Beoplay-E8-Manual-1
Credits: support.bang-olufsen.com

Bang & Olufsen Beoplay E8 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Bang & Olufsen Beoplay E8 Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case, take the earbuds out and press on the right one. After that, a white light will turn on the earbuds, and they will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Bang-&-Olufsen-Beoplay-E8-Manual-2
Credits: support.bang-olufsen.com

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on the right earbud one time.
  • Turn the volume up: Press and hold the multifunction touch button on the right earbud.
  • Turn the volume down: Press and hold the multifunction touch button on the left earbud.
  • Play the next song: Press the multifunction touch button on the right earbud two times.
  • Play the previous song: Press the multifunction touch button on the left earbud two times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 1 second.

Bang & Olufsen Beoplay E8 Manual | How to Activate Transparency Mode?

To activate and deactivate the transparency mode in the Bang & Olufsen Beoplay E8, all you have to do is to press the multifunction touch button on the left earbud one time.

Bang-&-Olufsen-Beoplay-E8-Manual-3
Credits: support.bang-olufsen.com

Bang & Olufsen Beoplay E8 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Bang & Olufsen Beoplay E8, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Bang & Olufsen Beoplay E8 Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Bang-&-Olufsen-Beoplay-E8-Manual-4
Credits: support.bang-olufsen.com

Bang & Olufsen Beoplay E8 Manual | LED Light Status

Earbuds

  • A white light on: The earbuds turn on.
  • A blue light flashing: The earbuds are ready to pair with any device.
  • A red light flashing on the right earbud: The earbuds are resetting.

Charging case

  • White lights flashing while charging: The case is charging.
  • White lights on while charging: The case is fully charged.
  • An orange light flashing with the earbuds inside: The earbuds are charging.
  • A green light on with the earbuds inside: The earbuds are fully charged.

Bang & Olufsen Beoplay E8 Manual | How to Reset?

Step 1: Delete all “Beoplay E8” pairing information from the connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press and hold the multifunction touch button on both earbuds for about 10 seconds, until a red light starts flashing on the right earbud. After that, the resetting will be done.

Bang-&-Olufsen-Beoplay-E8-Manual-5

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Bang-&-Olufsen-Beoplay-E8-Manual-6
Credits: PhoneArena

FAQs

Are the Bang & Olufsen Beoplay E8 waterproof?

For now, it is not known whether these earbuds are waterproof (IPX6 and up), although there is a good chance that they are not and have a rating of IPX4, which means they’re splash and sweat-resistant.

Do the Bang & Olufsen Beoplay E8 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Bang & Olufsen Beoplay E8 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

How to know when the Bang & Olufsen Beoplay E8 are fully charged?

When the earbuds are charging, an orange light is flashing on the charging case. When fully charged, the light turns green.

Can the Bang & Olufsen Beoplay E8 connect to PC and Laptop?

Yes, these earbuds can connect to PCs, laptops, and even tablets.

Are the Bang & Olufsen Beoplay E8 noise canceling?

No! These earbuds don’t come with noise cancellation technology.

We hope you now know how to operate the earphone from the above Bang & Olufsen Beoplay E8 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.