Baseus AirNora 2 Manual | Guide & Troubleshooting

The Baseus AirNora 2 earbuds come with specs such as Bluetooth 5.3 technology, Active Noise Cancellation, Transparency mode, BISA (Baseus Intelligent Spatial Acoustics) mode, and Low Latency using the specialized Baseus app, around 6.5 hours of bayberry life on a single charge, a 40mm bio-tech diaphragm and neodymium driver, and much more. Learn how to use these earbuds using this Baseus AirNora 2 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

Baseus AirNora 2 Specs Sheet

Model	Baseus AirNora 2
Weight	Earbuds: Around 4.2 grams each
Waterproof/IP ratings	IPX4
Bluetooth version	V5.3
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC
Driver	40mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 6.5 hours Charging case: Around 23 hours
Charging Time	Earbuds: Around 1 hour Charging case: Around 1 hour
App Support	Yes, Baseus App
Controls/Features	Play and pause a song, answer, end, and reject a call, activate the voice assistant, ANC, Transparency mode, play the next and previous song (app settings), Low Latency mode (app settings), BISA mode
Accessories	Charging case, USB cable, user manual, ear tips, warranty card
Price	Around 50 USD

Baseus AirNora 2 Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• User manual.
• Ear tips.
• Warranty card.

Baseus AirNora 2 Manual | All You Need To Know

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Baseus AirNora 2 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair with any device.

Step 7: Select the Baseus AirNora 2 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

How To Control These Earbuds?

NOTE: The touch control area is placed on the top part of the body of the earbuds.

• Pause a song: Take the earbuds out of the ear canal.
• Play a song: Place the earbuds into the ear canal.
• Answer an incoming call: Press the touch control area on any of the earbuds two times.
• End a current call: Press the touch control area on any of the earbuds two times.
• Reject an incoming call: Press and hold the touch control area on any of the earbuds for about 1.5 seconds.
• Activate the voice assistant: Press the touch control area on any of the earbuds three times.
• Change between the ANC and Transparency mode: Press and hold the touch control area on any of the earbuds for about 1.5 seconds (ANC>Normal>Transparency).
• Change between the BISA mode: Press the touch control area on any of the earbuds two times (Music>Theater>Normal).

NOTE: Playing the next and previous songs are controls supported by these earbuds, but they have to be activated using the Baseus app.

How To Reset The Earbuds?

Step 1: Open the lid of the case and keep the earbuds inside.

Step 2: Press and hold the button on the case for about 5 seconds, or until a red and white light flashes three times simultaneously.

This will reset the earbuds.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Charging Case

• A red light flashes while charging: The case is charging.
• A white light on while charging: The case is fully charged.
• A white light flashes and turns off after 1 to 2 minutes with the earbuds inside: The earbuds are charging.
• A red light on and turns off after 5 seconds: The case has less than 20% of battery.
• A white light on and turns off after 5 seconds: The case has between 21% and 100% of battery.
• A red and white light flashes three times while resetting: The earbuds are resetting.

Do These Earbuds Have An App?

Yeah! These earbuds work hand in hand with a specially made app called Baseus, which is available in the Play Store and App Store. After opening the app and pairing the earbuds, you will be able to see the earbuds’ battery percentage, in addition to various options such as configuring the audio of the earbuds, the Ambient sound and the multiple EQ modes, configuring the controls as needed, in addition to also having the possibility of locating the earbuds and general settings of the app.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Baseus AirNora 2 manual. Want to know anything about the earphones? Do not hesitate to ask in the comment section below.