Baseus Bowie MA10 Manual | Pairing & Charging Guide

The Baseus Bowie MA10 earbuds come with specs such as active noise cancelling technology, four ENC integrated microphones, an amazing total battery life of 140 hours using the charging case, waterproof support thanks to the IPX6 certification, Bluetooth 5.3 with up to 10 meters of connection range, and much more. Learn how to use these earbuds using this Baseus Bowie MA10 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

Baseus Bowie MA10 Specs Sheet

Model	Baseus Bowie MA10
Weight	Earbuds: About 5.5 grams per earbud Charging case: About 95.5 grams
Waterproof/IP ratings	IPX6
Bluetooth version	V5.3
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC
Driver	10mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 8 hours Charging case: Around 132 hours
Charging Time	Earbuds: Around 1 hour Charging case: Around 1.5 hours
App Support	Yes, the Baseus app
Controls/Features	Play and pause a song, answer, end, and reject a call, voice assistant, ANC, Transparency mode
Accessories	Charging case, USB cable, quick start guide, ear tips, ear wings, warranty card, stickers
Price	Around 35 USD

Baseus Bowie MA10 Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• Quick start guide.
• Ear tips.
• Ear wings.
• Warranty card.
• Stickers.

Baseus Bowie MA10 Manual | Guide & Troubleshooting

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

• A white light flashes quickly on one of the earbuds and slowly on the other one: The earbuds are ready to pair.
• A white light flashes three times while resetting: The earbuds are resetting.

Charging Case

• One light on: The case has between 0% and 20% of battery.
• Two lights on: The case has between 21% and 50% of battery.
• Three lights on: The case has between 51% and 70% of battery.
• Four lights on: The case has between 71% and 100% of battery.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

Step 2: Take the earbuds out of the case.

A white light will flash quickly on one of the earbuds and slowly on the other one, meaning that they are now ready to pair with any device.

Step 3: Unlock the desired device.

Step 4: Go to the device’s settings.

Step 5: Turn on Bluetooth on the desired device.

Step 6: Search for a new device.

Step 7: Select the Baseus Bowie MA10 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

Step 7: Take the earbuds out of the case.

A white light will flash quickly on one of the earbuds and slowly on the other one, meaning that they are now ready to pair with any device.

Step 8: Select the Baseus Bowie MA10 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

How To Control These Earbuds?

NOTE: The multifunction touch sensor is placed on the middle part of the body of the earbuds.

• Play and pause a song: Press the multifunction touch sensor on any of the earbuds two times.
• Answer an incoming call: Press the multifunction touch sensor on any of the earbuds two times.
• End a current call: Press the multifunction touch sensor on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch sensor on any of the earbuds for about 1 second.
• Activate the voice assistant: Press the multifunction touch sensor on any of the earbuds three times
• Change between the ANC and Transparency mode: Press and hold the multifunction touch sensor on any of the earbuds for about 1 second (ANC on, Transparency mode, ANC off).

How To Reset The Earbuds?

Step 1: Place the earbuds into the case and keep the lid open.

Step 2: Press and hold the button on the back of the charging case for about 5 seconds. A white light will flash on the earbuds three times.

After that, the resetting will be done.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Do These Earbuds Have An App?

Yes, these earbuds work hand in hand with a specially made app called Baseus, which is available in the Play Store and App Store. After opening the app and pairing the earbuds, you will be able to see the earbuds’ battery percentage, in addition to various options such as configuring the audio of the earbuds, the Ambient sound, and the multiple EQ modes, configuring the controls as needed, in addition to also having the possibility of locating the earbuds and general settings of the app.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Baseus Bowie MA10 manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.