Beats Fit Pro Manual | Step-by-step, In-depth Guide

The Beats Fit Pro comes with ANC and Transparency modes, a battery life of about 6 hours + 18 using the charging case, a specialized app, Bluetooth 5.0, the IPX4 certification, and more. Learn how to use them with this new Beats Fit Pro Manual.

If you are interested in purchasing these earbuds, you can easily do it using the Apple and Beats official website. In case you want to give the original manual a look, you can do it here.

Beats Fit Pro Specs Sheet

Model	Beats Fit Pro
Weight	Earbuds: 5.6 grams each Charging case: 55 grams
Waterproof/IP ratings	IPX4
Bluetooth version	V5.0
Range/Distance	10 meters
Driver	9.5mm
Audio Decoding	SBC, AAC
Connectivity Port/Charging Cable	Type-C
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: About 6 hours (ANC on)/ About 7 hours (ANC off) Charging case: About 18 hours (ANC on)
Charging Time	Earbuds: About 1.5 hours
App Support	Yes, Beats
Controls/Features	Play or pause music, play the next and previous song, answer, end, and reject a call, place the current call on hold and answer a second call, switch between the current call and a held call, stop listening through the earphones and send the call to the phone, ANC, Transparency mode
Accessories	Charging case, quick start guide, USB cable, ear tips, warranty card
Price	About 200 USD

Beats Fit Pro Accessories

The earbuds come with the following accessories:

• Charging case.
• Quick start guide.
• USB cable.
• Ear tips.
• Warranty card.

Beats Fit Pro Manual | Pairing & Charging Instructions

How To Pair The Earbuds?       

To iPhone, iPad, or iPod touch

Step 1: Turn on the Bluetooth on the desired device

Step 2: Place the earbuds into the charging case.

Step 3: With the charging case’s lid open, hold the earbuds next to the unlocked iPhone, iPad, or iPod touch.

Step 4: Select “Beats Fit Pro”. If a password is needed, type “0000”.

After that, the pairing will be done.

To Android Phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 2: Open the Beats app.

Step 3: Connect the “Beats Fit Pro” to the app.

Step 4: Press and hold the system button on the charging case until a light starts flashing, so the earbuds enter pairing mode.

Step 5: Turn on the Bluetooth on the desired device.

Step 6: Go to the device’s Bluetooth settings.

Step 7: Select “Beats Fit Pro”. If a password is needed, type “0000”.

After that, the pairing will be done.

To Mac or Another Device That Uses Bluetooth

Step 1: Turn on the Bluetooth on the desired device.

Step 2: Place the earbuds into the charging case

Step 3: With the charging case’s lid open, hold the earbuds next to the desired device.

Step 4: Press and hold the system button on the charging case until a light starts flashing, so the earbuds enter pairing mode.

Step 5: Go to the device’s Bluetooth settings.

Step 6: Click on “Add device”.

Step 7: Select “Beats Fit Pro”. If a password is needed, type “0000”.

After that, the pairing will be done.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

NOTE: The multifunction touch button is placed on the top part of the body of the earbuds.

• Play or pause music: Press the Beats logo on any of the earbuds one time.
• Play the next song: Press the Beats logo on any of the earbuds two times.
• Play the previous song: Press the Beats logo on any of the earbuds three times.
• Answer an incoming call: Press the Beats logo on any of the earbuds one time.
• End a current call: Press the Beats logo on any of the earbuds one time.
• Reject an incoming call: Press and hold the Beats logo on any of the earbuds.
• Place the current call on hold and answer a second call: Press the Beats logo on any of the earbuds one time.
• Switch between the current call and a held call: Press the Beats logo on any of the earbuds one time.
• Stop listening through the earphones and send the call to the phone: Press the Beats logo on any of the earbuds two times.

How To Activate ANC And Transparency Modes?

To activate or deactivate the ANC and transparency modes in the Beats Fit Pro, all you have to do is to press and hold the Beats logo on any of the earbuds.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in the Beats Fit Pro, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?      

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

What Do The Lights Mean?     

Charging case

• A red light on: The case has less than 40% of battery.
• A red light flashing: The earbuds have to be reset.

How To Reset These Earbuds?

Step 1: Place the earbuds into the charging case and keep its lid open.

Step 2: Press and hold the system button on the charging case for about 15 seconds, or until a red and white light starts flashing. After that, the resetting will be done.

A Guide To Beats Fit Pro APP

The Beats Fit Pro can be used with an application, called Beats. This application is available for Android devices. After you download the app and connect the earbuds, you will get to the main page of the app:

• Main page: After having completed the connection process, at the top of the main page are the battery percentages of the earbuds and the charging case. Just below this, we’ll have the ability to turn the Active Noise Canceling and Transparency modes on and off. After that, we will find the settings of the earbuds, among which are renaming the earbuds, exploring the features, changing the settings of the controls, and so on.

How To Update The Earbuds Software?

To iPhone, iPad, or iPod touch

Step 1: Open the Settings app on the device.

Step 2: Go to the Bluetooth menu.

Step 3: Find the earbuds in the connected devices list.

Step 4: Clock on the “I” next to them.

Step 5: Look at the “Firmware Version” number. If there is an update available, press “Download”.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Beats Fit Pro Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.