Beats Studio Buds Manual | Pairing & Charging Instructions 2022

The Beats Studio Buds have an amazing battery life of 8 hours, comes with three soft, silicone ear tips, Active Noise Cancelling (ANC) that continuously blocks unwanted external noise, transparency mode, the IPX4 sweat, and dust-proof certification, and much more. Learn how to use them with this new Beats Studio Buds Manual.

Beats Studio Buds Manual | Everything You Need To Know!

Beats Studio Buds Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “Beats Studio Buds”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 7: Select “Beats Studio Buds”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Beats Studio Buds Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Beats Studio Buds Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off:  Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press the multifunction touch button on any of the earbuds two times.
• Play the previous song: Press the multifunction touch button on any of the earbuds three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a call: Press the multifunction touch button on any of the earbuds one time.
• Answer a second incoming call and put the first call on hold: Press the multifunction touch button on any of the earbuds one time.
• Switch between two active calls: Press the multifunction touch button on any of the earbuds one time.
• Activate the transparency mode: Press and hold the multifunction touch button on any of the earbuds.
• Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds.

Beats Studio Buds Manual | How to Activate ANC Mode?

To activate or deactivate the ANC mode in the Beats Studio Buds, all you have to do is to press and hold the multifunction touch button on any of the earbuds.

Beats Studio Buds Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Beats Studio Buds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Beats Studio Buds Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Beats Studio Buds Manual | How to Reset?

Step 1: Place both earbuds into the charging case and keep its lid open.

Step 2: Press and hold the multifunction touch button on the charging case for about 15 seconds, or until a red and white light starts flashing on the case.

Step 3: When the red and white light starts flashing, stop pressing the button.

Step 4: After that, the light will only flash white, and the resetting will be done.

Beats Studio Buds Manual | LED Light Status

Charging case

• Red and white light flashing: Earbuds resetting.
• White light flashing: Resetting done.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Beats Studio Buds earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Beats Studio Buds Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.