Belkin-SOUNDFORM-Freedom-Manual-7

Belkin SOUNDFORM Freedom | How To Use These Earbuds?

The Belkin SOUNDFORM Freedom earbuds have Bluetooth 5.2, advanced ENC to reduce background noise, up to 8 hours of battery life, Qi wireless charging support, the IPX5 sweat and dust-proof certification, and more. Learn how to use these earbuds using this manual!

Belkin SOUNDFORM Freedom | User Guide

How to Pair The Earbuds?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

When a blue light starts flashing, the earbuds will be ready to pair with any device. If the earbuds don’t enter pairing mode automatically, then press and hold the touch panel on both earbuds for about 3 seconds.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “SOUNDFORM Freedom”. If a password is needed, type “0000”. After that, the pairing will be done.

To PC (Windows)

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically.

When a blue light starts flashing, the earbuds will be ready to pair with any device. If the earbuds don’t enter pairing mode automatically, then press and hold the touch panel on both earbuds for about 3 seconds.

Step 6: Select “SOUNDFORM Freedom”. If a password is needed, type “0000”. After that, the pairing will be done.

Belkin-SOUNDFORM-Freedom-Manual-1
Credits: Belkin

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Belkin-SOUNDFORM-Freedom-Manual-2
Credits: Applesfera

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the touch panel on any of the earbuds two times.
  • Play the next song: Press the touch panel on the right earbud three times.
  • Play the previous song: Press the touch panel on the left earbud three times.
  • Turn the volume up: Press the touch panel on the right earbud one time.
  • Turn the volume down: Press the touch panel on the left earbud one time.
  • Answer an incoming call: Press the touch panel on any of the earbuds two times.
  • End a current call: Press the touch panel on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction button on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press and hold the multifunction button on any of the earbuds for about 2 seconds.
Belkin-SOUNDFORM-Freedom-Manual-3
Credits: Belkin

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, it can be charged using a Qi wireless pad.

Belkin-SOUNDFORM-Freedom-Manual-4
Credits: Belkin

What Do The Lights Mean?

Earbuds

  • A blue light flashing: The earbuds are ready to pair with any device.
  • A white light flashing while charging: The earbuds are charging.
  • A white light on while charging: The earbuds are fully charged.
  • A blue and white light flashing: The earbuds are resetting.

Charging case

  • A red light on: The case has less than 50% of battery.
  • An orange light on: The case has more than 50% of battery.
  • A white light on: The case is fully charged.
Belkin-SOUNDFORM-Freedom-Manual-6
Credits: Belkin

How to Reset The Earbuds?

Step 1: Delete all “SOUNDFORM Freedom” pairing information from the connected device.

Step 2: Place the earbuds into the charging case and close the lid.

Step 3: Press and hold the reset button on the back of the charging case for about 10 seconds, until a blue and white light starts flashing.

Step 4: When the light stops flashing, open the lid of the charging case. After that, the resetting will be done.

Belkin-SOUNDFORM-Freedom-Manual-5
Credits: Belkin

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Belkin-SOUNDFORM-Freedom-Manual-7
Credits: Pickr

FAQs

Are the Belkin SOUNDFORM Freedom waterproof?

No, the Belkin SOUNDFORM Freedom are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

Do the Belkin SOUNDFORM Freedom have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Belkin SOUNDFORM Freedom have a low latency/gaming mode?

No. These earbuds don’t have a low latency/gaming mode.

How to know when the Belkin SOUNDFORM Freedom are fully charged?

When the earbuds are charging, a white light is flashing. When fully charged, said light stays on.

Can the Belkin SOUNDFORM Freedom connect to PC and Laptop?

Yes, these earbuds can connect to PCs, laptops, and even tablets.

Are the Belkin SOUNDFORM Freedom noise canceling?

No. These earbuds don’t come with noise-cancellation technology.

We hope you now know how to operate the earphone from the above Belkin SOUNDFORM Freedom manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.