Belkin SOUNDFORM Rise Manual | Pairing & Troubleshooting

The Belkin SOUNDFORM Rise earbuds come with Bluetooth 5.2 with a working range of 10 meters, two built-in microphones in each earbud, 7 hours of battery life + 24 hours using the charging case, the IPX5 sweat and dust-proof certification, and more. Learn how to use these earbuds using this Belkin SOUNDFORM Rise manual!

If you are interested in purchasing these earbuds, you can easily do it using the Belkin official website and Amazon. Also, if you want to give the original manual a look, you can do it here.

Belkin SOUNDFORM Rise Specs Sheet

Model	Belkin SOUNDFORM Rise
Waterproof/IP ratings	IPX5
Bluetooth version	V5.2
Range/Distance	10 meters
Driver	6mm
Audio Decoding	SBC, AAC
Connectivity Port/Charging Cable	Type-C
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: 7 hours Charging case: 24 hours
Charging Time	Earbuds: About 2 hours
App Support	No
Controls/Features	Play and pause a song, play the next and previous song, turn the volume up and down, answer, end, and reject a call
Accessories	Charging case, user manual, USB cable, ear tips
Price	80 USD

Belkin SOUNDFORM Rise Accessories

The earbuds come with the following accessories:

• Charging case.
• User manual.
• USB cable.
• Ear tips.

How To Use The Belkin SOUNDFORM Rise Earbuds?

How to Pair The Earbuds?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

When a blue light starts flashing, the earbuds will be ready to pair with any device. If the earbuds don’t enter pairing mode automatically, then press and hold the touch panel on both earbuds for about 3 seconds.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “SOUNDFORM Rise”. If a password is needed, type “0000”. After that, the pairing will be done.

To PC (Windows)

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically.

When a blue light starts flashing, the earbuds will be ready to pair with any device. If the earbuds don’t enter pairing mode automatically, then press and hold the touch panel on both earbuds for about 3 seconds.

Step 6: Select “SOUNDFORM Rise”. If a password is needed, type “0000”. After that, the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

NOTE: The multifunction touch button is placed on the top circular part of the stem of the earbuds.

• Play or pause music: Press the touch panel on any of the earbuds two times.
• Play the next song: Press the touch panel on the right earbud three times.
• Play the previous song: Press the touch panel on the left earbud three times.
• Turn the volume up: Press the touch panel on the right earbud one time.
• Turn the volume down: Press the touch panel on the left earbud one time.
• Answer an incoming call: Press the touch panel on any of the earbuds two times.
• End a current call: Press the touch panel on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction button on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press and hold the multifunction button on any of the earbuds for about 2 seconds.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, it can be charged using a Qi wireless pad.

What Do The Lights Mean?

Earbuds

• A blue light flashing: The earbuds are ready to pair with any device.
• A white light flashing while charging: The earbuds are charging.
• A white light on while charging: The earbuds are fully charged.

Charging case

• A red light on: The case has less than 50% of battery.
• An orange light on: The case has more than 50% of battery.
• A white light on: The case is fully charged.

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

How to Reset The Earbuds?

Step 1: Delete all “SOUNDFORM Rise” pairing information from the connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press and hold the multifunction touch button on both earbuds for about 10 seconds. After that, the resetting will be done.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Belkin SOUNDFORM Rise manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.