BGVP-Q2S-Manual-6

BGVP Q2S Manual | Pairing & Troubleshooting 2022

The BGVP Q2S comes with the Qualcomm QCC3040 chip, Bluetooth 5.2, a 6mm biological diaphragm moving coil, a battery life of about 7 hours, a Bluetooth range of 20 meters, and more. Learn how to use them with this new BGVP Q2S Manual.

BGVP Q2S Manual | Everything You Need To Know!

BGVP Q2S Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, a white light will start flashing in one of the earbuds, and they will turn on automatically.

When a white starts flashing in one of the earbuds, they will be ready to pair with any device.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “BGVP Q2s”. If a password is needed, type “0000”.

Step 5: After that, the white light will turn off, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, a white light will start flashing in one of the earbuds, and they will turn on automatically.

When a white light starts flashing in one of the earbuds, they will be ready to pair with any device.

Step 7: Select “BGVP Q2s”. If a password is needed, type “0000”.

Step 8: After that, the white light will turn off, and the pairing will be done.

BGVP-Q2S-Manual-1

BGVP Q2S Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

BGVP Q2S Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, a white light will start flashing in one of the earbuds, and they will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, a red light will flash one time, and the earbuds will turn off automatically.

BGVP-Q2S-Manual-2
Credits: AndroidBrick

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds two times.
  • Turn the volume up: Press the multifunction touch button on the right earbud two times.
  • Turn the volume down: Press the multifunction touch button on the left earbud two times.
  • Play the next song: Press the multifunction touch button on the right earbud three times.
  • Play the previous song: Press the multifunction touch button on the left earbud three times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Reject an incoming call: Press and hold Press the multifunction touch button on any of the earbuds for about 1 second.
  • Switch between two calls: Press and hold Press the multifunction touch button on any of the earbuds for about 2 seconds.

BGVP Q2S Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the BGVP Q2S, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

BGVP-Q2S-Manual-3

BGVP Q2S Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

BGVP Q2S Manual | How to Reset?

Step 1: Delete all “BGVP Q2s” pairing records from the connected device.

Step 2: Open the lid of the charging case and take the earbuds out. After that, a white light will start flashing in one of the earbuds, and they will turn on automatically.

Step 3: Press and hold the multifunction touch button on both earbuds for about 10 seconds, until a white light stays on in both earbuds.

Step 4: Press the multifunction touch button on both earbuds 5 times, and the lights will turn off. After that, the resetting will be done.

BGVP-Q2S-Manual-4
Credits: Scarbir

BGVP Q2S Manual | LED Light Status

Earbuds

  • A white light flashing in one of the earbuds: The earbuds are on.
  • A white light starts flashing in one of the earbuds: The earbuds will be ready to pair with any device.
  • Said white light turns off: The earbuds connected.
  • A white light on in both earbuds: The earbuds are resetting.

Charging case

  • A green light on while charging: The case is charging.
BGVP-Q2S-Manual-5
Credits: AndroidBrick

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds as said in the pairing section above.

BGVP-Q2S-Manual-6
Credits: Scarbir

FAQs

Are BGVP Q2S waterproof?

For now, it is not known whether these earbuds are waterproof (IPX6 and up), although there is a good chance that they are not and have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

Does BGVP Q2S have a microphone?

Yes, the BGVP Q2S have integrated microphones.

Do BGVP Q2S have a low latency/gaming mode?

No! The BGVP Q2S don’t have a low latency/gaming mode.

Can BGVP Q2S connect to PC and Laptop?

Yes, the BGVP Q2S can connect to PCs, laptops, and tablets.

Are BGVP Q2S noise canceling?

No! These earbuds don’t come with noise cancellation technology.

We hope you now know how to operate the earphone from the above BGVP Q2S Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.