Blackview AirBuds 7 | Step-by-step Manual

The Blackview AirBuds 7 come with specs such as the amazing IPX7 waterproof certification, Bluetooth 5.3 with a working range of about 10 to 12 meters, a 13mm dynamic driver and built-in microphones in each earbud, a battery life of about 6 hours + 24 hours using the charging case, and much more. Learn how to use these earbuds using this manual!

Blackview AirBuds 7 | How to Use These Earbuds?

How to Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, a blue light will be on for about 2 seconds, and the earbuds will turn on automatically.

When a red and blue light starts flashing on the earbuds, they will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “AirBuds 7” earbuds. If a password is needed, type “0000”. After that, the “Connected” voice prompt will sound, a blue light will flash every 5 seconds, and the pairing will be done.

To PC (Windows)

Step 1: Unlock the desired device.

Step 2: Turn on Bluetooth on the device.

Step 3: Go to the Settings.

Step 4: Go to “Bluetooth and other devices”.

Step 5: Click on “Add device”.

Step 6: Open the lid of the charging case. After that, a blue light will be on for about 2 seconds, and the earbuds will turn on automatically.

When a red and blue light starts flashing on the earbuds, they will be ready to pair with any device.

Step 7: Select the “AirBuds 7” earbuds. If a password is needed, type “0000”. After that, the “Connected” voice prompt will sound, a blue light will flash every 5 seconds, and the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, a blue light will be on for about 2 seconds, and the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, a red light will be on for about 2 seconds, and the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play a song: Press the multifunction touch area on any of the earbuds two times
• Pause a song: Press the multifunction touch area on any of the earbuds two times.
• Turn the volume up: Press the multifunction touch area on the right earbud one time.
• Turn the volume down: Press the multifunction touch area on the left earbud one time.
• Answer an incoming call: Press the multifunction touch area on any of the earbuds two times. A blue light will double flash every 2 seconds.
• End a current call: Press the multifunction touch area on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch area on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press and hold the multifunction touch area on any of the earbuds for about 2 seconds.
• Choose the next program: Press the multifunction touch area on the right earbud three times.
• Choose the previous program: Press the multifunction touch area on the left earbud three times.

How to Activate The Gaming Mode?

To activate, change, and deactivate the gaming mode in these earbuds, all you have to do is to press and hold the multifunction touch area on the right earbud for about 2 seconds.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

How to Clear The Earbuds’ Pairing Records?

Step 1: Open the lid of the charging case. After that, a blue light will be on for about 2 seconds, and the earbuds will turn on automatically.

Step 2: Take the earbuds out of the case.

Step 3: Press the multifunction touch area on both earbuds four times. After that, a red and blue light flashes three times, and the process will be done.

The Earbud’s Voice Prompts

• Connected: The earbuds are now paired with the desired device.

What Do The Lights Mean?

Earbuds

• A blue light turns on for about 2 seconds: The earbuds turn on.
• A red light turns on for about 2 seconds: The earbuds turn off.
• A red and blue light flashing: The earbuds are now in pairing mode.
• A blue light flashes every 5 seconds: The earbuds are connected to the device.
• A blue light double flashes every 2 seconds: There is an active call on the earbuds.
• A red light double flashes every 2 seconds: The earbuds have a low battery level.
• A red and blue light flashes three times while cleaning the pairing records: The earbuds are resetting.

Charging case

• The digital display flashes for about 10 seconds: The case has less than 20% of battery.
• 1 grid on the charging column that displays when the case is open: The case has between 0% and 25% of battery.
• 2 grids on the charging column that displays when the case is open: The case has between 25% and 50% of battery.
• 3 grids on the charging column that displays when the case is open: The case has between 50% and 75% of battery.
• 4 grids on the charging column that displays when the case is open: The case has between 75% and 100% of battery.
• 1 grid on the charging column that displays when the case is open with the earbuds inside: The earbuds have between 0% and 25% of battery.
• 2 grids on the charging column that displays when the case is open with the earbuds inside: The earbuds have between 25% and 50% of battery.
• 3 grids on the charging column that displays when the case is open with the earbuds inside: The earbuds have between 50% and 75% of battery.
• 4 grids on the charging column that displays when the case is open with the earbuds inside: The earbuds have between 75% and 100% of battery.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Blackview AirBuds 7 manual. Want to know anything about the earphones? Do not hesitate to ask in the