Blitzwolf Airaux AA-UM1 Manual | Pairing & Charging Instructions

The Blitzwolf Airaux AA-UM1 comes with the IPX6 sweat and water-proof certification, a BES2000IZ chipset, up to 4 hours of music playback with a fully charged battery, aptX, AAC, and SBC codecs, and much more. Learn how to use them with this new Blitzwolf Airaux AA-UM1 Manual.

Blitzwolf Airaux AA-UM1 Manual | Everything You Need To Know!

Blitzwolf Airaux AA-UM1 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take the earbuds out of the charging case. The earbuds will turn on and pair to each other automatically.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “Airaux AA-UM1”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take the earbuds out of the charging case. The earbuds will turn on and pair to each other automatically.

Step 7: Select “Airaux AA-UM1”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Blitzwolf Airaux AA-UM1 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Blitzwolf Airaux AA-UM1 Manual | How to Turn On and Off?

Turn on: Take the earbuds out of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds inside of the charging case and close its lid. After that, the earbuds will turn off automatically.

Blitzwolf Airaux AA-UM1 Manual | How to Activate Mono Mode?

To activate the mono mode in the Blitzwolf Airaux AA-UM1, all you have to do is to take one of the earbuds from the charging case white being connected to a device, and it will start working by itself.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press and hold the multifunction touch button on the right earbud.
• Play the previous song: Press and hold the multifunction touch button on the left earbud.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds two times.

Blitzwolf Airaux AA-UM1 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Blitzwolf Airaux AA-UM1 Manual | How to Reset?

Step 1: Press the multifunction button on both earbuds two times.

Step 2: Press and hold the multifunction button on both earbuds for 5 seconds.

Step 3: After that, the resetting will be done.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Blitzwolf Airaux AA-UM1 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Blitzwolf Airaux AA-UM1 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Blitzwolf company, all your information can be found on its Contact Us Page, where you can find numbers and emails available for several countries!