Home Audiophile Earbuds Manuals The Bluedio T-Elf 2 have the IPX6 sweat and water-proof certification, an 6mm dynamic driver, around 6 hours listening on a full charge, up to 20 hours of music playback with the charging case, Bluetooth 5.0, HFP, A2DP, AVRCP, SBC, AAC, and much more. Learn how to use them with this new Bluedio T-Elf 2 Manual. What's Inside ToggleBluedio T-Elf 2 Manual | Everything You Need To Know!Bluedio T-Elf 2 Manual | How to Pair / Connect?Bluedio T-Elf 2 Manual | How to Wear?Bluedio T-Elf 2 Manual | How to Turn On and Off?How to Control? / How to Operate? – InstructionsBluedio T-Elf 2 Manual | How to Activate Mono Mode?Bluedio T-Elf 2 Manual | How to ChargeBluedio T-Elf 2 Manual | LED Light StatusBluedio T-Elf 2 Manual | How to Reset?Some Common Earbuds Problems & TroubleshootingFAQs Bluedio T-Elf 2 Manual | Everything You Need To Know! Bluedio T-Elf 2 Manual | How to Pair / Connect? To iOS and Android phones Step 1: Open the lid of the charging case. After doing that, a light will turn on in the earbuds and they will turn on. Step 2: Go to the device’s Bluetooth settings. Step 3: Select “T Elf 2”. If a password is needed, type “0000”. Step 4: After that, the pairing will be done. To PC (Windows) Step 1: Turn on Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Click on Bluetooth. Step 6: Open the lid of the charging case. After doing that, a light will turn on in the earbuds and they will turn on. Step 7: Select “T Elf 2”. If a password is needed, type “0000”. Step 8: After that, the pairing will be done. Credits: Scarbir Bluedio T-Elf 2 Manual | How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. Bluedio T-Elf 2 Manual | How to Turn On and Off? Turn on Automatically: Open the lid of the charging case. After that, a light will turn on and they will turn on automatically. Manually: Press and hold the multifunction button on both earbuds for a couple of seconds. After that, a light will turn on and they will turn on. Turn off Automatically: Close the lid of the charging case. After that, the earbuds will turn off automatically. How to Control? / How to Operate? – Instructions Play or pause music: Press the multifunction touch button on any of the earbuds one time.Play the next song: Press the multifunction touch button on the right earbud three times.Play the previous song: Press the multifunction touch button on the left earbud three times.Turn the volume up: Press the multifunction touch button on the right earbud two times.Turn the volume down: Press the multifunction touch button on the left earbud two times.Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.End a call: Press the multifunction touch button on any of the earbuds one time.Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 2 seconds.Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for 1 second. Bluedio T-Elf 2 Manual | How to Activate Mono Mode? To activate the mono mode in the Bluedio T-Elf 2, all you have to do is to take the desired earbud out of the charging case after pairing them to de device. Credits: Scarbir Bluedio T-Elf 2 Manual | How to Charge Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Bluedio T-Elf 2 Manual | LED Light Status Earbuds Light turns on in the earbuds when the lid of the charging case is open: Earbuds turn on.Light on: Earbuds charging.Light off: Earbuds fully charged. Charging case Green light on: Earbuds charging.Green light off: Earbuds fully charged.Red light flashing: Case has low battery. Bluedio T-Elf 2 Manual | How to Reset? Step 1: Power off the Bluetooth setting on the connected device. Step 2: Power the earbuds on by pressing and holding the multifunction touch button on both earbuds for a couple of seconds. After that, a light will turn on and they will turn on. Step 3: Press the multifunction touch button on both earbuds 3 times. After that, they will turn off. Step 4: Place both earbuds into the charging case and close its lid. Step 5: Open the lid of the charging case, and wait until a light turns on in the earbuds. Step 6: Go to the device’s Bluetooth settings. Step 7: Select “TElf 2”. If a password is needed, type “0000”. Step 8: After that, the pairing will be done. Some Common Earbuds Problems & Troubleshooting Left / Right / One side of the earbuds have stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case.See alsoSkullcandy Push Active Manual | Step-by-step PairingGines·May 3, 2022·1 Comment 2. Try factory resetting the earbuds. If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left / Right / One side of the earbuds has low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. Microphone not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund. Bluedio T-Elf 2 earbuds not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth, 2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. Credits: Scarbir FAQs Are Bluedio T-Elf 2 waterproof? Yes, the Bluedio T-Elf 2 have the IPX6 water-resistant rating, which means that they’re dustproof and are, also, protected against water. Does Bluedio T-Elf 2 have a microphone? Yes, the Bluedio T-Elf 2 have integrated microphones. Do Bluedio T-Elf 2 have low latency/gaming mode? No, the Bluedio T-Elf 2 don’t have low latency/gaming mode. How to know when Bluedio T-Elf 2 are fully charged? When the earbuds are charging, a light turns on in the earbuds. When fully charged, the light turns off. Can Bluedio T-Elf 2 connect to PC and Laptop? Yes, the Bluedio T-Elf 2 can connect to PCs, laptops, and tablets. We hope you now know how to operate the earphone from the above Bluedio T-Elf 2 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section. In case you want or need to contact the Bluedio company, all your information can be found on its About Us Page, where you can find information about the company and the products!
