boAt-Airdopes-451-v2-Manual-8

boAt Airdopes 451 v2 Manual | All You Have To Know!

The boAt Airdopes 451 v2 earbuds come with specs such as the amazing IPX7 waterproof certification, 10mm drivers in each earbud, boAt Signature Sound, dual mics with ENx technology support, a total battery life of up to 25 hours using the charging case, Bluetooth 5.0 support, and much more. Learn how to use these earbuds using this boAt Airdopes 451 v2 manual!

If you are interested in purchasing these earbuds, you can easily do it using the boAt official website. Also, in case you are interested in giving the original manual a look, you can do it here.

boAt Airdopes 451 v2 Specs Sheet

ModelboAt Airdopes 451 v2
WeightEarbuds and charging case: Around 49 grams
Waterproof/IP ratings  IPX7
Bluetooth version          V5.0
Range/Distance10 meters
Connectivity Port/Charging CableType-C
Audio Decoding               SBC, AAC
Driver  10mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: About 5 hours
Charging case: About 20 hours
Charging Time  Earbuds: Around 45 minutes
Charging case: About 2 to 3 hours
App Support     No
Controls/Features         Play and pause a song, play the next and previous song, answer, end, and reject a call, turn the volume up and down
Accessories       Charging case, USB cable, user manual, warranty card, catalogue, ear tips, sticker
PriceAround 70 USD

boAt Airdopes 451 v2 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • USB cable.
  • User manual.
  • Warranty card.
  • Catalogue.
  • Ear tips.
  • Sticker.
boAt-Airdopes-451-v2-Manual-1
Credits: Techno Shyam

boAt Airdopes 451 v2 Manual | Step-by-step Guide

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Manually: Press and hold the capacitive touch control on both earbuds for about 2 seconds. After that, a blue light will flash for 1 second, and the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the capacitive touch control on both earbuds for about 8 seconds. After that, the earbuds will turn off.

How To Pair The Earbuds? – Dual Mode

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing, meaning that the earbuds are now ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Airdopes 451 v2 earbuds. If a password is needed, type “0000” or “1234”.

After that, a blue light will flash three times every one minute, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing, meaning that the earbuds are now ready to pair with any device.

Step 7: Select the Airdopes 451 v2 earbuds. If a password is needed, type “0000” or “1234”.

After that, a blue light will flash three times every one minute, and the pairing will be done.

boAt-Airdopes-451-v2-Manual-3

How To Pair The Earbuds? – Single Mode

Step 1: Open the lid of the charging case and take the selected earbud out. After that, it will turn on.

A blue light will flash for one second and then turn to a red and blue light, meaning that it will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Airdopes 451 v2 earbud. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

NOTE: To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo (dual) usage.

boAt-Airdopes-451-v2-Manual-4

How To Control These Earbuds?

NOTE: The capacitive touch control is placed on the outer part of the body of the earbuds.

  • Play or pause a song: Press the capacitive touch control on any of the earbuds one time.
  • Play the next song: While listening to music, press the capacitive touch control on the right earbud two times.
  • Play the previous song: While listening to music, press the capacitive touch control on the left earbud two times.
  • Answer an incoming call: Press the capacitive touch control on any of the earbuds one time.
  • End a current call: Press the capacitive touch control on any of the earbuds two times.
  • Reject an incoming call: Press the capacitive touch control on any of the earbuds two times.
  • Activate the voice assistant: Press and hold the capacitive touch control on any of the earbuds for about 3 seconds.
  • Turn the volume up: Swipe up the capacitive touch control on any of the earbuds.
  • Turn the volume down: Swipe down the capacitive touch control on any of the earbuds.
  • Auto-pause a song: Take the earbuds out of the ear canal.
  • Auto-play a song: Place the earbuds into the ear canal.
boAt-Airdopes-451-v2-Manual-5

How To Reset And Re-Pair These Earbuds?

NOTE: To ensure a good result, make sure that the earbuds are fully charged.

Step 1: Go to the device’s settings.

Step 2: Delete the Airdopes 451 v2 earbuds from the devices’ Bluetooth list.

Step 3: Turn off Bluetooth on the device.

Step 4: Place the earbuds into the case and keep the lid open.

Step 5: Press and hold the reset button on the case for about 10 seconds. A white light will flash three times.

This will reset the earbuds.

Step 6: Close the lid of the charging case.

Step 7: Turn on Bluetooth on the device.

Step 8: Search for a new device.

Step 9: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing, meaning that the earbuds are now ready to pair with any device.

Step 10: Select the Airdopes 451 v2 earbuds. If a password is needed, type “0000” or “1234”.

After that, a blue light will flash three times every one minute, and the pairing will be done.

boAt-Airdopes-451-v2-Manual-6

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

  • A blue light flashes for 1 second: The earbuds turn on.
  • A red and blue light starts flashing: The earbuds are ready to pair with any device.
  • A blue light flashes three times every one minute: The earbuds are connected.
  • A red light on for 2 seconds while on the charging case: The earbuds are charging.
  • Said red light stays off while on the charging case: The earbuds are fully charged.
  • A red light flashes three times: The earbuds have a low battery level (20% of battery).
  • A white light flashes three times while resetting: The earbuds are resetting.

Charging Case

  • One light on: The case has around 33.33% of battery.
  • Two lights on: The case has around 66.66% of battery
  • Three lights on: The case has around 100% of battery.
  • One light flashing while charging: The case has less than 33.33% of battery.
  • One light on and one flashing while charging: The case has between 33.33% and 66.66% of battery.
  • Two lights on and one flashing while charging: The case has more than 66.66% of battery.
  • Three lights on while charging: The case is fully charged.
boAt-Airdopes-451-v2-Manual-7

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

boAt-Airdopes-451-v2-Manual-8

FAQs

Are the boAt Airdopes 451 v2 waterproof?

Yes, these earbuds are waterproof (IPX6 and up). They have a rating of IPX7, meaning that they not only are against water but are also protected against the effects of immersion.

Do the boAt Airdopes 451 v2 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the boAt Airdopes 451 v2 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the boAt Airdopes 451 v2 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the boAt Airdopes 451 v2 noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

How to know when the boAt Airdopes 451 v2 are fully charged?

When the earbuds are charging, a red light is on. When fully charged, the light turns off.

We hope you now know how to operate the earbuds from the above boAt Airdopes 451 v2 manual. Want to know anything about the earphones? Do not hesitate to ask in the comment section below.