boAt-Airdopes-500-ANC-Manual-8

boAt Airdopes 500 ANC Manual | How To Use These Earbuds?

The boAt Airdopes 500 ANC earbuds come with specs such as Bluetooth 5.0 + EDR with the HSP, HFP, A2DPA, and AVRCP profiles, a battery life of up to 3.5 hours on a single charge, SBC codec support, 7mm drivers and built-in microphones in each earbud, the IPX4 dust and sweat-proof certification, and much more. Learn how to use these earbuds using this boAt Airdopes 500 ANC manual!

If you are interested in purchasing these earbuds, you can easily do it using the boAt official website. Also, in case you are interested in giving the original manual a look, you can do it here.

boAt Airdopes 500 ANC Specs Sheet

ModelboAt Airdopes 500 ANC
WeightEarbuds and charging case: Around 45 grams
Waterproof/IP ratings  IPX4
Bluetooth version          V5.0
Range/Distance10 meters
Connectivity Port/Charging CableType-C
Audio Decoding               SBC
Driver  7mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: About 3.5 hours
Charging case: About 20 hours
Charging Time  Earbuds: Around 1.5 hours
Charging case: About 2 hours
App Support     No
Controls/Features         Play and pause a song, play the next and previous song, answer, end, and reject a call, voice assistant
Accessories       Charging case, USB cable, user manual, warranty card, ear tips, FAQ card, catalogue, sticker, read me before use card
PriceAround 120 USD

boAt Airdopes 500 ANC Accessories

The earbuds come with the following accessories:

  • Charging case.
  • USB cable.
  • User manual.
  • Warranty card.
  • Ear tips.
  • FAQ card.
  • Catalogue.
  • Sticker.
  • Read me before use card.

boAt Airdopes 500 ANC Manual | Everything You Need To Know

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Manually: Press the capacitive touch control on both earbuds for about 3 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Manually: Press the capacitive touch control on both earbuds for about 8 seconds. After that, the earbuds will turn off.

How To Control These Earbuds?

NOTE: The capacitive touch control is placed on the top part of the body of the earbuds.

  • Play or pause a song: Press the capacitive touch control on any of the earbuds two times.
  • Play the next song: Press the capacitive touch control on the right earbud two times.
  • Play the previous song: Press the capacitive touch control on the left earbud two times.
  • Answer an incoming call: Press the capacitive touch control on any of the earbuds one time.
  • End a current call: Press the capacitive touch control on any of the earbuds one time.
  • Reject an incoming call: Press the capacitive touch control on any of the earbuds two times.
  • Activate the voice assistant: Press and hold the capacitive touch control on any of the earbuds for about 3 seconds.

Volume cannot be controlled via earbuds and can only be adjusted using the connected phone/media device.

boAt-Airdopes-500-ANC-Manual-3

How To Pair The Earbuds? – Dual Mode

To Android And iOS Devices

Step 1 Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Airdopes 500 ANC earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair with any device.

Step 7: Select the Airdopes 500 ANC earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

boAt-Airdopes-500-ANC-Manual-4

How To Pair The Earbuds? – Single Mode

Step 1: Open the lid of the charging case and take the selected earbud out. After that, it will turn on.

The earbuds will now be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Airdopes 500 ANC earbud. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

NOTE: To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo (dual) usage.

boAt-Airdopes-500-ANC-Manual-5

How To Reset And Re-Pair These Earbuds?

NOTE: To ensure a good result, make sure that the earbuds are fully charged.

Step 1: Place the earbuds into the charging case and keep the lid open.

Step 2: Press and hold the reset button on the charging case for about 10 seconds, and light starts flashing on the case.

This will reset the earbuds.

Step 3: Close the lid of the case.

Step 4: Open the lid of the charging case.

After that, the resetting will be done.

boAt-Airdopes-500-ANC-Manual-6

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

  • A white light on while on the charging case: The earbuds are charging.
  • Said white light turns off while on the charging case: The earbuds are fully charged.

Charging Case

  • A light flashing while resetting: The earbuds are resetting.
boAt-Airdopes-500-ANC-Manual-7

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

boAt-Airdopes-500-ANC-Manual-8

FAQs

Are the boAt Airdopes 500 ANC waterproof?

No, these earbuds are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant.

Do the boAt Airdopes 500 ANC have a microphone?

Yes, the earbuds come with integrated microphones.

Do the boAt Airdopes 500 ANC have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the boAt Airdopes 500 ANC connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the boAt Airdopes 500 ANC noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

How to know when the boAt Airdopes 500 ANC are fully charged?

When the earbuds are charging, a light is on. When fully charged, the light turns off.

We hope you now know how to operate the earbuds from the above boAt Airdopes 500 ANC manual. Want to know anything about the earphones? Do not hesitate to ask in the comment section below.