boAt Airdopes Hype Manual | Step-by-step Earbuds Guide

The boAt Airdopes Hype earbuds come with specs such as the IPX5 sweat and dust-proof certification, Bluetooth 5.3 with 10 meters of work range, a battery life of 10 hours + up to 90 hours using the charging case, 13mm drivers, built-in microphones, ENx technology support, and much more. Learn how to use these earbuds using this boAt Airdopes Hype manual!

If you are interested in purchasing these earbuds, you can easily do it using the boAt official website. Also, in case you are interested in giving the original manual a look, you can do it here.

boAt Airdopes Hype Specs Sheet

Model	boAt Airdopes Hype
Weight	Earbuds and charging case: Around 38 grams
Waterproof/IP ratings	IPX5
Bluetooth version	V5.3
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC, AAC
Driver	13mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 10 hours Charging case: Around 90 hours
Charging Time	Earbuds: Around 40 minutes Charging case: Around 1.5 hours
App Support	No
Controls/Features	Play and pause a song, play the next and previous song, answer, end, and reject a call, voice assistant
Accessories	Charging case, USB cable, user manual, warranty card, FAQ card, stickers
Price	Around 65 USD

boAt Airdopes Hype Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• User manual.
• Warranty card.
• FAQ card.
• Stickers.

boAt Airdopes Hype Manual | Earbuds Pairing Guide

How To Control These Earbuds?

NOTE: The capacitive touch control is placed on the top outside part of the body of the earbuds.

• Play or pause a song: Press the capacitive touch control on any of the earbuds one time.
• Play the next song: While listening to music, press the capacitive touch control on the right earbud two times.
• Play the previous song: While listening to music, press the capacitive touch control on the left earbud two times.
• Answer an incoming call: Press the capacitive touch control on any of the earbuds one time.
• End a current call: Press the capacitive touch control on any of the earbuds two times.
• Reject an incoming call: Press the capacitive touch control on any of the earbuds two times.
• Activate the voice assistant: Press and hold the capacitive touch control on any of the earbuds for about 3 seconds.

Volume cannot be controlled via earbuds and can only be adjusted using the connected phone/media device.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Manually: Press the capacitive touch control on both earbuds for 3 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press the capacitive touch control on both earbuds for 5 seconds. After that, the earbuds will turn off.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will flash in one earbud and blue every 5 seconds on the other one, meaning that they are ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Airdopes Hype earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will flash in one earbud and blue every 5 seconds on the other one, meaning that they are ready to pair with any device.

Step 7: Select the Airdopes Hype earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

How To Reset And Re-Pair These Earbuds?

NOTE: To ensure a good result, make sure that the earbuds are fully charged.

Step 1: Go to the device’s settings.

Step 2: Delete the Airdopes Hype earbuds from the devices’ Bluetooth list.

Step 3: Turn off Bluetooth on the desired device.

Step 4: Take the earbuds out of the charging case.

Step 5: Press the capacitive touch control on both earbuds for about 5 seconds. A light will start flashing.

Step 6: Place the earbuds into the charging case. They will automatically turn off.

Step 7: Close the lid of the case and wait for 5 seconds. This will reset the earbuds, and a red light will flash 5 times in both the case and the earbuds.

Step 8: Turn on Bluetooth on the desired device.

Step 9: Search for a new device.

Step 10: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will flash in one earbud and blue every 5 seconds on the other one, meaning that they are ready to pair with any device.

Step 11: Select the Airdopes Hype earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

What Do The Lights Mean?

Earbuds

• A red and blue light flashes in one earbud and blue every 5 seconds on the other one: The earbuds are ready to pair with any device.
• A light flashes for 5 seconds while resetting: The earbuds are resetting.

Charging Case

• A red light on for 2 seconds with the earbuds inside: The earbuds are charging.
• Said light turns off with the earbuds inside: The earbuds are fully charged.
• A red light flashes three times when the case is open: The case has a low battery level.
• A white light flashes three times when the case is open: The case has between 30% and 70% of battery.
• A green light flashes three times when the case is open: The case has between 70% and 99% of battery.
• No light on when the case is open: The case is fully charged.
• A red light flashing slowly while charging: The case has a low battery level.
• A white light flashing slowly while charging: The case has between 30% and 70% of battery.
• A green light flashing slowly while charging: The case has between 70% and 99% of battery.
• A green light on when the case is open: The case is fully charged.
• A cyan light on for 5 seconds with the earbuds inside: The left earbud is charging.
• A purple light on for 5 seconds with the earbuds inside: The right earbud is charging.
• A blue light on for 5 seconds with the earbuds inside: The earbuds are fully charged.
• A light flashes for 5 seconds while resetting: The earbuds are resetting.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above boAt Airdopes Hype manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.