Boloxa-A6-Manual-10

Boloxa A6 Manual | Instructions & Troubleshooting

The Boloxa A6 earbuds come with specs such as 13mm drivers and built-in microphones in each earbud, a very light weight of only 3.4 grams per earbud, about 5 hours of battery life, Bluetooth 5.3 technology and a working connection range of around 10 meters, the dust and sweat-proof IPX7 certification, and much more. Learn how to use these earbuds using this Boloxa A6 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

Boloxa A6 Specs Sheet

ModelBoloxa A6
WeightEarbuds: Around 3.4 grams each
Waterproof/IP ratings  IPX7
Bluetooth version          V5.3
Range/Distance10 meters
Connectivity Port/Charging CableType-C
Audio Decoding               SBC
Driver  13mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: About 5 hours
Charging Time  Earbuds: Around 2 hours
Charging case: About 2.5 hours
App Support     No
Controls/Features         Play and pause a song, play the next and previous song, answer, end, and reject a call, turn the volume up and down, voice assistant
Accessories       Charging case, USB cable, user manual, ear tips
PriceAround 35 USD

Boloxa A6 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • USB cable.
  • User manual.
  • Ear tips.
Boloxa-A6-Manual-1

Boloxa A6 Manual | Step-by-step Guide

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Boloxa-A6-Manual-2

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Manually: Press and hold the touch control area on both earbuds for about 2 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the touch control area on both earbuds for about 5 seconds. After that, a red light will flash, and the earbuds will turn off.

How To Pair The Earbuds? – Dual Mode

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

After that, they will be now ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the A6 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

After that, they will be now ready to pair with any device.

Step 7: Select the A6 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

How To Pair The Earbuds? – Mono Mode

Mode 1

Step 1: Pair both earbuds with the device.

Step 2: When in dual mode, place one of the earbuds into the charging case. The other one will continue working by itself.

Mode 2

Step 1: Take only one of the earbuds out of the charging case. It will enter pairing mode.

Step 2: Search for a new device.

Step 3: Select the A6 earbud. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

Boloxa-A6-Manual-5

How To Control These Earbuds?

NOTE: The touch control area is placed on the middle part of the body of the earbuds.

  • Play or pause a song: Press the touch control area on any of the earbuds two times.
  • Turn the volume up: Press and hold the touch control area on the right earbud.
  • Turn the volume down: Press and hold the touch control area on the right earbud.
  • Play the next song: While listening to music, press the touch control area on the right earbud three times.
  • Play the previous song: While listening to music, press the touch control area on the left earbud three times.
  • Answer an incoming call: Press the touch control area on any of the earbuds two times.
  • End a current call: Press the touch control area on any of the earbuds two times.
  • Reject an incoming call: Press and hold the touch control area on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press the touch control area on any of the earbuds three times.

NOTE 2: In single (mono) mode, the right earbud supports the next song and volume up, while the left earbud supports the previous song and volume down.

Boloxa-A6-Manual-6

How To Reset These Earbuds?

Step 1: Delete the A6 earbuds from the devices’ Bluetooth list.

Step 2: Turn off Bluetooth.

Step 3: Place the earbuds into the case close its lid.

Step 4: Press and hold the reset button on the bottom of the charging case for about 5 seconds. A light will flash three times.

This will reset the earbuds.

Step 5: Turn on Bluetooth.

Step 6: Search for a new device.

Step 7: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

After that, they will be now ready to pair with any device.

Step 8: Select the A6 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

Boloxa-A6-Manual-7

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

Boloxa-A6-Manual-8

What Do The Lights Mean?

Earbuds

  • A red light flashes: The earbuds turn off.
  • A red light on while on the charging case: The earbuds are charging.
  • Said red light turns off while on the charging case: The earbuds are fully charged.
  • A red and blue light flashes three times while resetting: The earbuds are resetting.

Charging Case

  • 0 to 99 appears on the display while charging: The case is charging.
  • A 100 appears on the display while charging: The case is fully charged.
  • Flashing up and down design with the earbuds inside: The earbuds are charging.
  • Said flashing lights turn off with the earbuds inside: The earbuds are fully charged.
  • A light flashes three times while resetting: The earbuds are resetting.
Boloxa-A6-Manual-9

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Boloxa-A6-Manual-10

FAQs

Are the Boloxa A6 waterproof?

Yes, these earbuds are waterproof (IPX6 and up). They have a rating of IPX7, meaning that they not only are against water but are also protected against the effects of immersion.

Do the Boloxa A6 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Boloxa A6 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Boloxa A6 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Boloxa A6 noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

How to know when the Boloxa A6 are fully charged?

When the earbuds are charging, a light is on. When fully charged, the light turns off.

We hope you now know how to operate the earbuds from the above Boloxa A6 manual. Want to know anything about the earphones? Do not hesitate to ask in the comment section below.