Home Audiophile Earbuds Manuals The Boloxa S12 earbuds come with specs such as the dust and sweat-proof IPX7 certification, a total battery life of up to 108 hours using the charging case, support for the SBC audio codec, Bluetooth technology on its 5.3 version, one 16.3mm driver integrated in each earbud, built-in microphones, and much more. Learn how to use these earbuds using this Boloxa S12 manual! If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here. What's Inside ToggleBoloxa S12 Specs SheetBoloxa S12 AccessoriesBoloxa S12 Manual | Pairing & TroubleshootingHow To Reset These Earbuds?How To Charge The Earbuds?What Do The Lights Mean?How To Wear These Earbuds?How To Turn On And Off?How To Pair The Earbuds? – Dual ModeHow To Pair The Earbuds? – Mono ModeHow To Control These Earbuds?The Earbuds’ Voice PromptsDo These Earbuds Have An App?Some Common Problems & TroubleshootingFAQs Boloxa S12 Specs Sheet ModelBoloxa S12WeightEarbuds and charging case: Around 93 gramsWaterproof/IP ratings IPX7Bluetooth version V5.3Range/Distance10 metersConnectivity Port/Charging CableType-CAudio Decoding SBCDriver 16.3mmSpeaker frequency response20Hz – 20kHzBattery Life Earbuds: About 12 hours Charging case: About 96 hoursCharging Time Earbuds: Around 2 hours Charging case: About 2.5 hoursApp Support NoControls/Features Play and pause a song, play the next and previous song, answer, end, and reject a call, turn the volume up and down, voice assistantAccessories Charging case, USB cable, user manual, ear tipsPriceAround 70 USD Boloxa S12 Accessories The earbuds come with the following accessories: Charging case. USB cable. User manual. Ear tips. Boloxa S12 Manual | Pairing & Troubleshooting How To Reset These Earbuds? Step 1: Delete the S12 earbuds from the devices’ Bluetooth list. Step 2: Turn off Bluetooth. Step 3: Take the earbuds out of the case. Step 4: Press the multifunction button on both earbuds five times. A red light will flash three times. This will reset the earbuds. Step 5: Place both earbuds into the charging case to get charged for 1 minute. Step 6: Turn on Bluetooth. Step 7: Search for a new device. Step 8: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other. After that, they will be now ready to pair with any device. Step 9: Select the S12 earbuds. If a password is needed, type “0000” or “1234”. After that, the pairing will be done. How To Charge The Earbuds? Earbuds To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically. Charging Case To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically. What Do The Lights Mean? Earbuds A red light on while on the charging case: The earbuds are charging. Said red light turns off while on the charging case: The earbuds are fully charged. A red light flashes three times while resetting: The earbuds are resetting. Charging Case 0 to 99 appears on the display while charging: The case is charging. A 100 appears on the display while charging: The case is fully charged. Flashing up and down design with the earbuds inside: The earbuds are charging. Said flashing lights turn off with the earbuds inside: The earbuds are fully charged. How To Wear These Earbuds? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. How To Turn On And Off? Turn On Automatically: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. Manually: Press and hold the multifunction button on both earbuds for about 2 seconds. After that, the earbuds will turn on. Turn Off Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically. Manually: Press and hold the multifunction button on both earbuds for about 5 seconds. After that, the earbuds will turn off. How To Pair The Earbuds? – Dual Mode To Android And iOS Devices Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other. After that, they will be now ready to pair with any device. Step 2: Unlock the desired device. Step 3: Go to the device’s settings. Step 4: Turn on Bluetooth on the desired device. Step 5: Search for a new device. Step 6: Select the S12 earbuds. If a password is needed, type “0000” or “1234”. After that, the pairing will be done. To Windows (PC) Step 1: Turn on the Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Click on Bluetooth. Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other. After that, they will be now ready to pair with any device. Step 7: Select the S12 earbuds. If a password is needed, type “0000” or “1234”. After that, the pairing will be done. How To Pair The Earbuds? – Mono Mode Mode 1 Step 1: Pair both earbuds with the device. Step 2: When in dual mode, place one of the earbuds into the charging case. The other one will continue working by itself. Mode 2 Step 1: Take only one of the earbuds out of the charging case. It will enter pairing mode. Step 2: Search for a new device. Step 3: Select the S12 earbud. If a password is needed, type “0000” or “1234”. After that, the pairing will be done.See alsoYUEHEMEI YHM Q2 Manual | Step-by-step User GuideGines·April 25, 2024 How To Control These Earbuds? NOTE: The multifunction button is placed on the top part of the body of the earbuds. Play or pause a song: Press the multifunction button on any of the earbuds one time. Turn the volume up: Press and hold the multifunction button on the right earbud. Turn the volume down: Press and hold the multifunction button on the right earbud. Play the next song: While listening to music, press the multifunction button on the right earbud two times. Play the previous song: While listening to music, press the multifunction button on the left earbud two times. Answer an incoming call: Press the multifunction button on any of the earbuds one time. End a current call: Press the multifunction button on any of the earbuds one time. Reject an incoming call: Press and hold the multifunction button on any of the earbuds for about 2 seconds. Activate the voice assistant: Press the multifunction button on any of the earbuds three times. NOTE 2: In single (mono) mode, the right earbud supports the next song, while the left earbud supports the previous song. The Earbuds’ Voice Prompts Battery low: The earbuds have less than 10% of battery. Power off: The earbuds turn off. Do These Earbuds Have An App? Sadly, these earbuds don’t come with app support. Some Common Problems & Troubleshooting Left/Right/One side of the earbuds has stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case. 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working range. If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left/Right/One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. The microphone is not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund. The earbuds are not connecting to Windows/laptop/PC If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth. 2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. FAQs Are the Boloxa S12 waterproof? Yes, these earbuds are waterproof (IPX6 and up). They have a rating of IPX7, meaning that they not only are against water but are also protected against the effects of immersion. Do the Boloxa S12 have a microphone? Yes, the earbuds come with integrated microphones. Do the Boloxa S12 have a low latency/gaming mode? No, these earbuds don’t have a low latency/gaming mode. Can the Boloxa S12 connect to PCs and laptops? Yes, these earbuds can connect to PCs and laptops. Are the Boloxa S12 noise-canceling? No, these earbuds don’t come with noise-cancellation technology. How to know when the Boloxa S12 are fully charged? When the earbuds are charging, a light is on. When fully charged, the light turns off. We hope you now know how to operate the earbuds from the above Boloxa S12 manual. Want to know anything about the earphones? Do not hesitate to ask in the comment section below.