Boltune-ANC-BH023-Manual-8

Boltune ANC BH023 Manual | Step-by-step Guide 2021

The Boltune ANC BH023 comes with the IPX8 waterproof certification, ANC technology, and AVRCP, HFP, HSP, SBC, AAC technology, 7 hours listening on a full charge, a 10mm dynamic driver, 4 mics (2 per earbud) to enhance voice pick up and much more. Learn how to use them with this new Boltune ANC BH023 Manual.

Boltune ANC BH023 Manual | Everything You Need To Know!

Boltune ANC BH023 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take the earbuds out of the charging case. They will turn on and pair to each other automatically. After that, the LED indicators on both earbuds will flash white indicating the earbuds are in pairing mode now.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the Bluetooth settings.

Step 4: Select “Boltune BT-BH023”. If a password is needed, type “0000”.

Step 5: After that, the LED indicators on both earbuds will flash white slowly and the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take the earbuds out of the charging case. They will turn on and pair to each other automatically. After that, the LED indicators on both earbuds will flash white indicating the earbuds are in pairing mode now.

Step 7: Select “Boltune BT-BH023”. If a password is needed, type “0000”.

Step 8: After that, the LED indicators on both earbuds will flash white slowly and the pairing will be done.

Boltune-ANC-BH023-Manual-1
Credits: Scarbir

Boltune ANC BH023 Manual | How To Wear?

Step 1: Choose the ear tips that fit your ears the best.

Step 2: Identify the left and right earbuds.

Step 3: Insert the earbuds into the canal of the ears. Turn them around and make sure to find the most comfortable position.

Boltune-ANC-BH023-Manual-2

Boltune ANC BH023 Manual | How to Activate Mono Mode?

Step 1: Pair both earbuds with the device as said above.

Step 2: Take out one earbud from the charging case and make sure the other is placed in the charging case with the lid covered.

Step 3: After that, you can freely use the single (left or right) earbud now.

Boltune ANC BH023 Manual | How to Turn On And Off?

Turn on: Open the lid of the charging case with the earbuds inside. They will automatically turn on.

Boltune-ANC-BH023-Manual-3

Turn off: Place the earbuds into the charging case and close the lid. They will automatically turn off.

Boltune-ANC-BH023-Manual-4

How to Control? / How to Operate? – Instructions

  • Play and pause music: Tap the touch button on any of the earbuds twice.
  • Turn the volume up: Tap the touch button on the right earbud.
  • Turn the volume down: Tap the touch button on the left earbud.
  • Play the next song: Tap the touch button on the right earbud three times.
  • Play the previous song: Tap the touch button on the left earbud three times.
  • Answer an incoming call: Tap the touch button on any of the earbuds once.
  • End a call: Tap and hold the touch button on any of the earbuds for 2 seconds.
  • Reject an incoming call: Tap and hold the touch button on any of the earbuds for 2 seconds.
  • Activate the Voice Assistant: Tap and hold the touch button on the right earbud for 2 seconds.

Boltune ANC BH023 Manual | How to Activate ANC?

To turn on or off the ANC feature, all you have to do is to press and hold the touch button on the left earbud for 2 seconds.

Boltune-ANC-BH023-Manual-5
Credits: Nerd Techy

Boltune ANC BH023 Manual | Voice Prompts

  • “Call rejected”: Incoming call declined.
  • “Pairing”: Earbuds into pairing mode.
  • “Connected”: Earbuds successfully connected.
  • “Disconnected”: Bluetooth out of range/failed to pair with the device.
  • “Toot”: Turn on/off ANC function, turn on/off voice control and the highest volume is reached.

Boltune ANC BH023 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case. The earbuds will start charging automatically.

Boltune-ANC-BH023-Manual-6

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Boltune-ANC-BH023-Manual-7

Boltune ANC BH023 Manual | LED Light Status

Earbuds

  • White light flashing: Earbuds ready to pair.
  • White light flashing slowly: Earbuds paired.
  • White light flashing 3 times: Earbuds resetting.

Boltune ANC BH023 Manual | How to Reset?

Step 1: If you have paired a device with the earbuds before, remove “Boltune BT-BH023” from the Bluetooth device list.

Step 2: Take out one of the earbuds and make sure the other is placed in the charging case with the lid covered.

Step 3: In the first 10 seconds, press and hold the touch button for 10 seconds until the LED indicator flashes white three times. The pairing history is then cleared with the earbud off.

Step 4: Take out the other earbud.

Step 5: In the first 10 seconds, press and hold its touch button for 10 seconds until the LED indicator flashes white three times. The pairing history is then cleared with the earbud off.

Step 6: Place both earbuds back into the charging case, close the lid, then uncover it to pair with any Bluetooth device.

Boltune-ANC-BH023-Manual-8
Credits: Scarbir

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory reset the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Boltune ANC BH023 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Boltune-ANC-BH023-Manual-9

FAQs

Are the Boltune ANC BH023 waterproof?

The Boltune ANC BH023 have the IPX8 certification, which means that the earbuds are not tested for protection against solid objects (dust), but they are fully resistant to water.

Does Boltune ANC BH023 have a microphone?

Yes, the Boltune ANC BH023 have 4 integrated microphones.

Do Boltune ANC BH023 have low latency/gaming mode?

No, the Boltune ANC BH023 don’t have low latency/gaming mode.

How to know when Boltune ANC BH023 are fully charged?

The Boltune ANC BH023 charge in about 90 minutes, so after that time, the earbuds should be fully charged.

Can Boltune ANC BH023 connect to PC and Laptop?

Yes, the Boltune ANC BH023 can connect to PCs, laptops and tablets.

We hope you now know how to operate the earphone from the above Boltune ANC BH023 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Boltune company, all your information can be found on its Contact Us Page, where you can find numbers and emails available for several countries!