Boltune BT-BH024 Manual | Step-by-step Pairing

The Boltune BT-BH024 earbuds come with specs such as Bluetooth 5.1, a built-in Qualcomm QCC3026 chipset and PEEK + PU high fidelity dynamic drivers, music for up to 7 hours on a single full charge, and a pocket-sized charging case that extends playtime up to 42 hours, Smart Wearing Control In-ear Detection technology, the amazing IPX8 waterproof certification, and much more. Learn how to use these earbuds using this manual!

Boltune BT-BH024 Manual | All You Have To Know

How to Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

When a white light starts flashing, and the “Pairing” voice prompt sounds, the earbuds will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “Boltune BT-BH024” earbuds. If a password is needed, write “0000”. After that, the “Connected” voice prompt will sound.

Step 6: Once the primary earbud “Boltune BT-BH024” is connected, a window will pop up requesting to pair the secondary earbud “Boltune BT-BH024 R” with your phone. Tap connect. After that, the “Connected” voice prompt will sound, and the pairing will be done.

To PC (Windows)

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

When a white light starts flashing, and the “Pairing” voice prompt sounds, the earbuds will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the Settings.

Step 4: Go to “Bluetooth and other devices”.

Step 5: Turn on Bluetooth on the device.

Step 6: Click on “Add device”.

Step 7: Select the “Boltune BT-BH024” earbuds. If a password is needed, write “0000”. After that, the “Connected” voice prompt will sound.

Step 8: Once the primary earbud “Boltune BT-BH024” is connected, a window will pop up requesting to pair the secondary earbud “Boltune BT-BH024 R” with your phone. Tap connect. After that, the “Connected” voice prompt will sound, and the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Pause the music: Take the earbuds out of the ear canal.
• Play the music: Place the earbuds into the ear canal.
• Play the next song: Press the multifunction touch button on the right earbud three times.
• Play the previous song: Press the multifunction touch button on the left earbud three times.
• Turn the volume up: Press and hold the multifunction touch button on the right earbud for more than 3 seconds. A “Toot” sound will be heard when the highest setting is reached.
• Turn the volume down: Press and hold the multifunction touch button on the left earbud for more than 3 seconds.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time. Also, you can place the earbuds into the ear canal.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press the multifunction touch button on any of the earbuds two times. The “Call rejected” voice prompt will sound.
• Activate the voice control: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds. A “Toot” sound will be heard.

The Earbuds’ Voice Prompts

• Pairing: The earbuds will be ready to pair with any device.
• Connected: The earbuds are now connected.
• Disconnected: There was a pairing error/the earbuds are out of the Bluetooth range.
• Call rejected: A call has been rejected.
• Toot: The voice control was turned on/off.
• Toots: The volume level has reached the highest setting.
• Battery low: The earbuds have a low battery level.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

How to Clear The Pairing List?

Step 1: Open the lid of the charging case and keep the earbuds inside.

Step 2: Press and hold the button on the back of the charging case for about 10 seconds, until a white light flashes three times.

Step 3: Remove the “Boltune BT-BH024” and “Boltune BT-BH024 R” earbuds from the connected device.

After that, the process will be done.

What Do The Lights Mean?

Earbuds

• A white light flashing: The earbuds are now in pairing mode.
• A white light flashes three times: The pairing list is being cleared.

Charging case

• A red light on while charging: The case has between 0% and 25% of battery.
• An orange light on while charging: The case has between 25% and 50% of battery.
• A yellow light on while charging: The case has between 50% and 75% of battery.
• A white light on while charging: The case has between 75% and 100% of battery.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Boltune BT-BH024 manual. Want to know anything about the earphones? Do not hesitate to ask in the comments below!