Boult-Audio-Omega-Manual-6

Boult Audio Omega Manual | How To Pair The Earbuds?

The Boult Audio Omega earbuds come with specs such as 30dB Active Noise Cancellation and Transparency Mode support, Zen Tech Environmental Noise Cancellation microphones, a battery life of up to 32 hours using the charging case, Bluetooth 5.2, the IPX5 sweat and dust-proof certification, and much more. Learn how to use these earbuds using this manual!

Boult Audio Omega Manual | Earbuds Pairing Guide

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch area on both earbuds for about 2 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch area on both earbuds for about 2 seconds. After that, the earbuds will turn off.

Boult-Audio-Omega-Manual-1

How To Pair The Earbuds?

To Android Or iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on and pair with each other.

NOTE: If the earbuds don’t turn on automatically, then press and hold the multifunction touch area on both earbuds for about 2 seconds. After that, the earbuds will turn on and pair with each other.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Boult Audio Airbass earbuds. If a password is needed, type “0000”. After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on and pair with each other.

NOTE: If the earbuds don’t turn on automatically, then press and hold the multifunction touch area on both earbuds for about 2 seconds. After that, the earbuds will turn on and pair with each other.

Step 7: Select the Boult Audio Airbass earbuds. If a password is needed, type “0000”. After that, the pairing will be done.

Boult-Audio-Omega-Manual-2

How To Control These Earbuds? – Stereo Mode

  • Play or pause a song: Press the multifunction touch area on any of the earbuds two times.
  • Play the next song: While listening to music, press and hold the multifunction touch area on the right earbud for about 2 seconds.
  • Play the previous song: While listening to music, press and hold the multifunction touch area on the left earbud for about 2 seconds.
  • Answer an incoming call: Press the multifunction touch area on any of the earbuds two times.
  • End a current call: Press the multifunction touch area on any of the earbuds two times.
  • Reject an incoming call: With an incoming call, press and hold the multifunction touch area on any of the earbuds for about 1 second.
  • Activate the voice assistant: Press the multifunction touch area on any of the earbuds three times.
Boult-Audio-Omega-Manual-3

How To Activate The ANC Mode?

To activate, deactivate, and change between the Active Noise Cancellation, Transparent and Normal modes, all you have to do is to press the multifunction touch area on the right earbud one time.

Boult-Audio-Omega-Manual-4

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port. It will start charging automatically.

Boult-Audio-Omega-Manual-5

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Boult-Audio-Omega-Manual-6

FAQs

Are the Boult Audio Omega waterproof?

No, the Boult Audio Omega are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

Do the Boult Audio Omega have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Boult Audio Omega have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Boult Audio Omega connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Boult Audio Omega noise-canceling?

Yes, these earbuds come with noise-cancellation technology.

We hope you now know how to operate the earphone from the above Boult Audio Omega manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.