Boytond-Q92-Manual-7

Boytond Q92 Manual | Pairing & Troubleshooting

The Boytond Q92 earbuds come with specs such as waterproof support thanks to the amazing IPX7 certification, Bluetooth 5.3 technology, one 13mm and built-in microphones integrated in each earbud, 6 hours of battery life + 30 hours using the charging case, and much more. Learn how to use these earbuds using this Boytond Q92 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

Boytond Q92 Specs Sheet

ModelBoytond Q92
WeightEarbuds: Around 5 grams each
Waterproof/IP ratings  IPX7
Bluetooth version          V5.3
Range/Distance10 meters
Connectivity Port/Charging CableType-C
Audio Decoding               SBC
Driver  13mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: Around 6 hours
Charging case: Around 30 hours
Charging Time  Earbuds: Around 1 hour
Charging case: Around 1.5 hours
App Support     No
Controls/Features         Play and pause a song, play the next and previous song, answer, end, and reject a call, voice assistant, turn the volume up and down
Accessories       Charging case, USB cable, user manual
PriceAround 40 USD

Boytond Q92 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • USB cable.
  • User manual.
Boytond-Q92-Manual-1

Boytond Q92 Manual | Everything You Need To Know

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 5 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 5 seconds. After that, the earbuds will turn off.

Boytond-Q92-Manual-2

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

  • A blue and red light flashes on the master earbud and a blue light flashes quickly on the secondary one: The earbuds are ready to pair.
  • Said flashing lights turn off: The earbuds are connected.
  • A red light on while on the charging case: The earbuds are charging.
  • Said light turns off while on the charging case: The earbuds are fully charged.
  • A red and blue light flashes while resetting: The earbuds are resetting.

Charging Case

  • 0 to 99 appears on the display while charging: The case is charging.
  • A 100 appears on the display while charging: The case is fully charged.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

A blue and red light will start flashing on the master earbud and a blue light will flash quickly on the secondary one, and the earbuds will now be ready to pair.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the YYK-Q92 earbuds. If a password is needed, type “0000” or “1234”.

After that, the flashing lights will turn off, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

A blue and red light will start flashing on the master earbud and a blue light will flash quickly on the secondary one, and the earbuds will now be ready to pair.

Step 7: Select the YYK-Q92 earbuds. If a password is needed, type “0000” or “1234”.

After that, the flashing lights will turn off, and the pairing will be done.

Boytond-Q92-Manual-4

How To Control These Earbuds?

NOTE: The multifunction touch button is placed on the upper part of the body of the earbuds.

  • Pause and play a song: Press the multifunction touch button on any of the earbuds one time.
  • Play the next song: Press the multifunction touch button on the right earbud two times.
  • Play the previous song: Press the multifunction touch button on the left earbud two times.
  • Turn the volume up: Press and hold the multifunction touch button on the right earbud for about 1 second.
  • Turn the volume down: Press and hold the multifunction touch button on the left earbud for about 1 second.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 1 second.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

How To Reset And Re-Pair These Earbuds?

Step 1: Delete all pairing information about the YYK-Q92 earbuds on the connected device.

Step 2: Turn off Bluetooth on the device.

Step 3: Place both earbuds into the charging case and keep the lid open. The earbuds will start charging.

Step 4: Press and hold the multifunction touch button on both earbuds for about 8 seconds. A red and blue light will flash one time, and then the earbuds will continue charging.

This will clean the pairing record on the earbuds.

Step 5: Turn on Bluetooth on the device.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

A blue and red light will start flashing on the master earbud and a blue light will flash quickly on the secondary one, and the earbuds will now be ready to pair.

Step 7: Select the YYK-Q92 earbuds. If a password is needed, type “0000” or “1234”.

After that, the flashing lights will turn off, and the pairing will be done.

Boytond-Q92-Manual-6

Do These Earbuds Have An App?

No, these earbuds don’t have app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Boytond-Q92-Manual-7

FAQs

Do the Boytond Q92 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Boytond Q92 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Boytond Q92 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Boytond Q92 noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

Are the Boytond Q92 waterproof?

Yes, these earbuds are waterproof (IPX6 and up). They have a rating of IPX7, meaning that they not only are against water but are also protected against the effects of immersion.

We hope you now know how to operate the earbuds from the above Boytond Q92 manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.