Creative Outlier Pro Manual | Step-by-step Pairing 2022

The Creative Outlier Pro has two 10mm graphene-coated drivers, 6 Omni-directional microphones, Bluetooth 5.2, the IPX5 certification, a total battery life of 60 hours using the charging case, and much more. Learn how to use them with this new Creative Outlier Pro Manual.

Creative Outlier Pro Manual | Everything You Need To Know!

Creative Outlier Pro Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for 3 seconds. When a red and blue light starts flashing, the earbuds will be ready to pair with any device.

NOTE: In case the earbuds don’t go into pairing mode automatically, all you have to do is to press and hold the multifunction touch button on both earbuds for about 3 seconds. After that, they will be ready to pair with any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “Creative Outlier Pro”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for 3 seconds. When a red and blue light starts flashing, the earbuds will be ready to pair with any device.

NOTE: In case the earbuds don’t go into pairing mode automatically, all you have to do is to press and hold the multifunction touch button on both earbuds for about 3 seconds. After that, they will be ready to pair with any device.

Step 6: Select “Creative Outlier Pro”. If a password is needed, type “0000”.

Step 7: After that, the pairing will be done.

Creative Outlier Pro Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Creative Outlier Pro Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for 3 seconds.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically. Also, you can press and hold the multifunction touch button on both earbuds for 6 seconds.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on the right earbud two times.
• Play the next song: Press the multifunction touch button on the right earbud three times.
• Turn the volume up: Press and hold the multifunction touch button on the left earbuds for about 3 seconds.
• Turn the volume down: Press and hold the multifunction touch button on the right earbuds for about 3 seconds.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 3 seconds.
• Activate the voice assistant: Press the multifunction touch button on the left earbud three times.

Creative Outlier Pro Manual | How to Activate Ambient Mode?

To activate or deactivate the Ambient Mode in the Creative Outlier Pro, all you have to do is to press the multifunction touch button on the left earbud two times.

Creative Outlier Pro Manual | How to Activate ANC Mode?

To activate or deactivate the ANC Mode in the Creative Outlier Pro, all you have to do is to press the multifunction touch button on the left earbud two times.

Creative Outlier Pro Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Creative Outlier Pro, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Creative Outlier Pro Manual | How to Reset?

Step 1: Delete the Creative Outlier Pro from the connected devices list on the device’s Bluetooth.

Step 2: Place the earbuds into the charging case.

Step 3: Press and hold the multifunction touch button on both earbuds for about 5 seconds, until a blue light flashes three times on the earbuds.

Step 4: Take the earbuds out of the charging case. After that, the resetting will be done.

Creative Outlier Pro Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Creative Outlier Pro Manual | LED Light Status

Earbuds

• Red and blue light flashing: The earbuds turn on.
• Red light flashing: The earbuds are charging.
• Green light on: The earbuds are fully charged.
• Blue light flashing three times while resetting: The earbuds are resetting.

Charging case

• Red light flashing: The case is charging.
• Green light on: The case is fully charged.
• Red light on: The case has a low battery.
• Yellow light on: The case has a medium battery.
• Green light flashing: The case has all battery.

A Guide To Creative Outlier Pro APP

The Creative Outlier Pro can be used with an application, called Creative. This application is available for iOS and Android devices. 

• First page: On this first page, all the devices that are connected to the application will be found. Pressing on the device will open the main page of the application, where you will not only see the connected device, but also the options to configure the Sound Mode (which deals with Super X-Fi, Acoustic Engine, and Equalizer), although they can also be configured in their own main section. In addition, the volume of the earbuds can be moderated.
• Second page: This is the Account part of the application. Here, not only can you log in with an account, but you will also have information about the different products that Creative has, as well as you can choose the language and appearance of the application itself, as well as data about it and the company.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Creative Outlier Pro earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds as said in the pairing section above.

FAQs

We hope you now know how to operate the earph