CrossBeats-Airpop-Manual-8

CrossBeats Airpop Manual | Step-by-step Earbuds Pairing

The CrossBeats Airpop earbuds come with specs such as the IPX5 dust and sweat-proof certification, Bluetooth 5.1, 10mm drivers and built-in microphones in each earbud, a total battery life of 30 hours using the charging case, 10 meters of working range, and much more. Learn how to use these earbuds using this CrossBeats Airpop manual!

If you are interested in purchasing these earbuds, you can easily do it using the CrossBeats official website. Also, in case you are interested in giving the original manual a look, you can do it here.

CrossBeats Airpop Specs Sheet

ModelCrossBeats Airpop
WeightEarbuds: Around 2 grams each
Waterproof/IP ratings  IPX5
Bluetooth version          V5.1
Range/Distance10 meters
Connectivity Port/ Charging CableType-C
Audio Decoding               AAC
Driver  10mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds and charging case: Around 30 hours
Charging Time  Earbuds: Around 1.5 hours
Charging case: Around 1.5 hours
App Support     No
Controls/Features         Play and pause a song, turn the volume up and down, play the next and previous song, answer, end, and reject a call, voice assistant
Accessories       Charging case, USB cable, user manual, warranty card, ear tips
PriceAround 60 USD

CrossBeats Airpop Accessories

The earbuds come with the following accessories:

  • Charging case.
  • USB cable.
  • User manual.
  • Warranty card.
  • Ear tips.

CrossBeats Airpop Manual | All You Have To Know

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, a white light will be on for 1 second, and the earbuds will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case. After that, an orange light will be on for 1 second, and the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch area on both earbuds for about 8 seconds. After that, an orange light will be on for 1 second, and the earbuds will turn off.

CrossBeats-Airpop-Manual-2

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, a white light will be on for 1 second, and the earbuds will turn on automatically and pair with each other.

A white light will turn on, and the earbuds will now be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the CB-Airpop earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, a white light will be on for 1 second, and the earbuds will turn on automatically and pair with each other.

A white light will turn on, and the earbuds will now be ready to pair with any device.

Step 7: Select the CB-Airpop earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

CrossBeats-Airpop-Manual-3

How To Control These Earbuds?

NOTE: The multifunction touch area is placed on the upper part of the body of the earbuds.

  • Play or pause a song: Press the multifunction touch area on any of the earbuds two times.
  • Turn the volume up: Press the multifunction touch area on the left earbud one time.
  • Turn the volume down: Press the multifunction touch area on the right earbud one time.
  • Play the next song: While listening to music, press the multifunction touch area on the right earbud three times.
  • Play the previous song: While listening to music, press the multifunction touch area on the left earbud three times.
  • Answer an incoming call: Press the multifunction touch area on any of the earbuds two times.
  • End a current call: Press the multifunction touch area on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch area on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press and hold the multifunction touch area on any of the earbuds for about 2 seconds.
CrossBeats-Airpop-Manual-4

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

CrossBeats-Airpop-Manual-5

How To Reset And Re-Pair These Earbuds?

NOTE: To ensure a good result, make sure that the earbuds are fully charged.

Step 1: Go to the device’s settings.

Step 2: Delete the CB-Airpop earbuds from the devices’ Bluetooth list.

Step 3: Turn off Bluetooth on the device.

Step 4: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 5: Press and hold the multifunction touch area on both earbuds for about 3 seconds. They will enter matching mode.

This will reset the earbuds.

Step 6: Place the earbuds into the charging case. They will turn off.

Step 7: Turn on Bluetooth on the desired device.

Step 8: Search for a new device.

Step 9: Open the lid of the charging case and take the earbuds out. After that, a white light will be on for 1 second, and the earbuds will turn on automatically and pair with each other.

A white light will turn on, and the earbuds will now be ready to pair with any device

Step 10: Select the CB-Airpop earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

CrossBeats-Airpop-Manual-6

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

What Do The Lights Mean?

Earbuds

  • A white light on for 1 second: The earbuds turn on.
  • An orange light on for 1 second: The earbuds turn off.
  • A white light on: The earbuds are ready to pair with any device.
  • An orange light on while on the charging case: The earbuds are charging.
  • Said orange light turns off while on the charging case: The earbuds are fully charged.
  • An orange light flashes every 0.2 seconds: The earbuds have a low battery level.

Charging Case

  • A light flashing while charging: The case is charging.
  • A light on while charging: The case is fully charged.
  • A light flashing: The case has a low battery level.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

CrossBeats-Airpop-Manual-8

FAQs

Are the CrossBeats Airpop waterproof?

No, the CrossBeats Airpop are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re splash and sweat-resistant.

Do the CrossBeats Airpop have a microphone?

Yes, the earbuds come with integrated microphones.

Do the CrossBeats Airpop have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the CrossBeats Airpop connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the CrossBeats Airpop noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

How to know when the CrossBeats Airpop are fully charged?

When the earbuds are charging, a light turns on. When fully charged, the light turns off.

We hope you now know how to operate the earbuds from the above CrossBeats Airpop manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.