CrossBeats-Torq-2-0-Manual-9

CrossBeats Torq 2.0 Manual | All You Have To Know!

The CrossBeats Torq 2.0 earbuds come with specs such as 3D cinematic surround sound support, IR sensors, 18mm drivers, Bluetooth 5.3, wireless charging technology for the charging case, two microphones in each earbud, 50ms low latency, and much more. Learn how to use these earbuds using this CrossBeats Torq 2.0 manual!

If you are interested in purchasing these earbuds, you can easily do it using the CrossBeats official website. Also, in case you are interested in giving the original manual a look, you can do it here.

CrossBeats Torq 2.0 Specs Sheet

ModelCrossBeats Torq 2.0
WeightEarbuds: Around 6 grams each
Waterproof/IP ratings  IPX6
Bluetooth version          V5.3
Range/Distance10 meters
Connectivity Port/ Charging CableType-C
Audio Decoding               SBC, AAC
Driver  18mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds and charging case: Around 72 hours
Charging Time  Earbuds: Around 1.5 hours
Charging case: Around 2 hours
App Support     No
Controls/Features         Play and pause a song, turn the volume up and down, play the next and previous song, answer, end, and reject a call, voice assistant
Accessories       Charging case, USB cable, user manual, warranty card, quick start guide, ear tips
PriceAround 145 USD

CrossBeats Torq 2.0 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • USB cable.
  • User manual.
  • Warranty card.
  • Quick start guide.
  • Ear tips.

CrossBeats Torq 2.0 Manual | Guide & Troubleshooting

How To Pair The Earbuds? – Dual Mode

To Android And iOS Devices

Step 1: Open the lid of the charging case and keep the earbuds inside.

Step 2: Press the button on the charging case for 2 seconds. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will flash on the left earbud, and they will now be ready to pair with any device.

Step 3: Unlock the desired device.

Step 4: Go to the device’s settings.

Step 5: Turn on Bluetooth on the desired device.

Step 6: Search for a new device.

Step 7: Select the CB-TORQ (L) earbuds. If a password is needed, type “0000” or “1234”.

After that, the flashing light will turn off, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and keep the earbuds inside.

Step 7: Press the button on the charging case for 2 seconds. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will flash on the left earbud, and they will now be ready to pair with any device.

Step 8: Select the CB-TORQ (L) earbuds. If a password is needed, type “0000” or “1234”.

After that, the flashing light will turn off, and the pairing will be done.

CrossBeats-Torq-2-0-Manual-2

How To Pair The Earbuds? – Mono Mode

Step 1: Open the lid of the charging case and keep the earbuds inside.

Step 2: Press the button on the charging case for 2 seconds. After that, the earbuds will turn on automatically.

Step 3: Take the selected earbud out of the charging case.

Step 4: Press and hold the multifunction touch sensor on the earbud for 4 seconds. A red and blue light will flash, and It will now be ready to pair with any device.

Step 5: Unlock the desired device.

Step 6: Go to the device’s settings.

Step 7: Turn on Bluetooth on the desired device.

Step 8: Search for a new device.

Step 9: Select the CB-TORQ (L) or CB-TORQ (R). If a password is needed, type “0000” or “1234”.

After that, the flashing light will turn off, and the pairing will be done.

CrossBeats-Torq-2-0-Manual-3

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Manually: With the earbuds on the case, press the button on the case for 2 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

CrossBeats-Torq-2-0-Manual-4

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically. Also, it can be charged using a wireless charger.

CrossBeats-Torq-2-0-Manual-5

How To Control These Earbuds?

NOTE: The multifunction touch sensor is placed on the upper part of the body of the earbuds.

  • Auto-pause a song: Take the earbuds out of the ear canal.
  • Auto-play a song: Place the earbuds into the ear canal.
  • Play or pause a song: Press the multifunction touch sensor on any of the earbuds one time.
  • Turn the volume up: Press and hold the multifunction touch sensor on the right earbud for 2 seconds.
  • Turn the volume down: Press and hold the multifunction touch sensor on the left earbud for 2 seconds.
  • Play the next song: While listening to music, press the multifunction touch sensor on the right earbud two times.
  • Play the previous song: While listening to music, the multifunction touch sensor on the left earbud two times.
  • Answer an incoming call: Press the multifunction touch sensor on any of the earbuds two times.
  • End a current call: Press the multifunction touch sensor on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch sensor on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press the multifunction touch sensor on any of the earbuds three times.
CrossBeats-Torq-2-0-Manual-6

How To Reset And Re-Pair These Earbuds?

NOTE: To ensure a good result, make sure that the earbuds are fully charged.

Step 1: Go to the device’s settings.

Step 2: Delete the CB-TORQ (L) earbuds from the devices’ Bluetooth list.

Step 3: Turn off Bluetooth on the device.

Step 4: Open the lid of the charging case and keep the earbuds inside. A red light will be on.

Step 5: Press and hold the button on the charging case for about 10 seconds. Wait until a red light turns off and then on.

Step 6: Take both earbuds out of the charging case. A red and blue light will flash, and It will now be ready to pair with any device.

Step 7: Turn on Bluetooth on the desired device.

Step 8: Search for a new device.

Step 9: Select the CB-TORQ (L) earbuds. If a password is needed, type “0000” or “1234”.

After that, the flashing light will turn off, and the pairing will be done.

CrossBeats-Torq-2-0-Manual-7

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

What Do The Lights Mean?

Earbuds

  • A red and blue light flashing: The earbuds are ready to pair with any device.
  • Said red and blue light turns off: The earbuds are connected.
  • A red light on while on the charging case: The earbuds are charging.
  • Said red light turns off while on the charging case: The earbuds are fully charged.
  • A red and blue light flashing while resetting: The earbuds are resetting.

Charging Case

  • One light flashing while charging: The case has about 0% and 33% of battery.
  • One light on and one flashing while charging: The case has about 34% and 66% of battery.
  • Two lights on and one flashing while charging: The case has about 67% and 99% of battery.
  • All lights on while charging: The case is fully charged.

CrossBeats-Torq-2-0-Manual-8

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

CrossBeats-Torq-2-0-Manual-9

FAQs

Are the CrossBeats Torq 2.0 waterproof?

Yes, the CrossBeats Torq 2.0 are waterproof (IPX6 and up). They have a rating of IPX6, which means that they’re protected against water.

Do the CrossBeats Torq 2.0 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the CrossBeats Torq 2.0 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the CrossBeats Torq 2.0 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the CrossBeats Torq 2.0 noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

How to know when the CrossBeats Torq 2.0 are fully charged?

When the earbuds are charging, a light turns on. When fully charged, the light turns off.

We hope you now know how to operate the earbuds from the above CrossBeats Torq 2.0 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.