DENVER TWE-60 TWS Manual | Step-by-step Guide 2021

The DENVER TWE-60 TWS have an amazing battery life of about 150 hours, touch controls on both earbuds, a playtime of about 5 hours, a strong charging case, Bluetooth 5.0, HFP, A2DP, AVRCP, SBC, AAC, and much more. Learn how to use them with this new DENVER TWE-60 TWS Manual.

DENVER TWE-60 TWS Manual | Everything You Need To Know!

DENVER TWE-60 TWS Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take the earbuds out of the charging case. The earbuds will turn on with a light, and connect to each other automatically. When a red and blue light starts flashing, the earbuds will be ready to pair to any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “TWE-60_L”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take the earbuds out of the charging case. The earbuds will turn on with a light, and connect to each other automatically. When a red and blue light starts flashing, the earbuds will be ready to pair to any device.

Step 7: Select “TWE-60_L”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

DENVER TWE-60 TWS Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

DENVER TWE-60 TWS Manual | How to Turn On and Off?

Turn on

Automatically: Take the earbuds out of the charging case. After that, a light will turn on and the earbuds will turn on automatically.

Manually: Press and hold the multifunction button on both earbuds for a couple of seconds. After that, a light will turn on and the earbuds will turn on.

Turn off

Automatically: Place the earbuds inside of the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction button on both earbuds for a couple of seconds. After that, the earbuds will turn off.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds on time.
• End a call: Press the multifunction touch button on any of the earbuds two times.

DENVER TWE-60 TWS Manual | How to Activate Mono Mode?

To activate the mono mode in the DENVER TWE-60 TWS, all you have to do is to take one of the earbuds from the charging case and pair it to the device as said in the pairing section above.

DENVER TWE-60 TWS Manual | How to Reset?

Step 1: Delete all the connectivity records of the “TWE-60_L” on the device.

Step 2: Turn the earbuds on by pressing and holding the multifunction button on both earbuds. After that, the earbuds will turn on.

Step 3: When a blue and red light starts flashing, press the multifunction button on the left earbud four times.

Step 4: Turn the earbuds off by pressing and holding the multifunction button on both earbuds. After that, the earbuds will turn off.

Step 5: After that, the resetting will be done.

DENVER TWE-60 TWS Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.  

DENVER TWE-60 TWS Manual | LED Light Status

Earbuds

• Blue and red light flashing: Earbuds ready to pair.
• Light turns on: Earbuds turn on.
• Light on when charging: Earbuds charging.
• Light off when charging: Earbuds fully charged.

Charging case

• Light on: Case charging.
• Light off: Case fully charged.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

DENVER TWE-60 TWS earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above DENVER TWE-60 TWS Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the DENVER company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!