E6S TWS Manual | Step-by-step Guide 2022

The E6S TWS comes with a WT200 chipset, EDR 5,0, Bluetooth 5.1, a total battery life of 12 hours, the IPX4 water-resistant rating, 3.5 hours of play time, AAC, and SBC codecs, and much more. Learn how to use them with this new E6S TWS Manual.

E6S TWS Manual | Everything You Need To Know!

E6S TWS Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and press and hold the multifunction touch button on both earbuds for 3 seconds. After that, a blue light will start flashing and the earbuds will turn on and pair to each other.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “E6S TWS”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and press and hold the multifunction touch button on both earbuds for 3 seconds. After that, a blue light will start flashing and the earbuds will turn on and pair to each other.

Step 7: Select “E6S TWS”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

E6S TWS Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

E6S TWS Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and press and hold the multifunction touch button on both earbuds for 3 seconds. After that, a blue light will start flashing and the earbuds will turn on and pair to each other.

Turn off:  Press and hold the multifunction touch button on both earbuds for 3 seconds. After that, a red light will flash 3 times and the earbuds will turn off.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Turn the volume up: Press the multifunction touch button on the left earbud two times.
• Turn the volume down: Press the multifunction touch button on the right earbud two times.
• Play the next song: Press and hold the multifunction touch button on the right earbud.
• Play the previous song: Press and hold the multifunction touch button on the left earbud.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a call: Press the multifunction touch button on any of the earbuds one time.
• Call the latest phone number: Press the multifunction touch button on the left earbud three times.
• Activate the voice assistant: Press the multifunction touch button on the right earbud three times.

E6S TWS Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the E6S TWS, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

E6S TWS Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

E6S TWS Manual | LED Light Status

Earbuds

• Blue light flashing: Earbuds turn on.
• Red light flashing 3 times: Earbuds turn off.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

E6S TWS earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above E6S TWS Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.