EarFun-Air-Pro-3-Manual-11

EarFun Air Pro 3 Manual | How To Use These Earbuds?

The EarFun Air Pro 3 come with specs such as 9 hours of battery life + 36 hours using the charging case (ANC off), and 7 hours of battery life + 30 hours using the charging case (ANC on), Bluetooth 5.3, a total of 6 integrated microphones, the IPX5 dust and sweat-proof certification, and much more. Learn how to use these earbuds using this EarFun Air Pro 3 manual!

If you are interested in purchasing these earbuds, you can easily do it using the EarFun official website and Amazon. In case you want to give the original manual a look, you can do it here.

EarFun Air Pro 3 Specs Sheet

ModelEarFun Air Pro 3
WeightEarbuds: 5 grams each
Charging case: 43 grams
Waterproof/IP ratings  IPX5
Bluetooth version          V5.3
Range/Distance10 meters
Driver11mm
Audio DecodingAAC
Connectivity Port/Charging CableType-C
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: About 7 hours (ANC on)/ About 9 hours (ANC off)
Charging case: About 30 hours (ANC on)/ About 36 hours (ANC off)
Charging Time  Earbuds: About 1 hour
Charging time: About 2 hours
App Support     Yes, EarFun Audio
Controls/Features         Play or pause music, play the next and previous song, turn the volume up and down, answer, end, and reject a call, voice assistant, answer and transfer two calls to the connected device, ANC
Accessories       Charging case, user manual, USB cable, ear tips
PriceAbout 80 USD

EarFun Air Pro 3 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • User manual.
  • USB cable.
  • Ear tips.
earfun-air-pro-3-manual-0

EarFun Air Pro 3 | Step-by-step Earbuds Manual  

How to Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, a blue light will flash for about 1 second, and the earbuds will turn on automatically.

When a blue light starts flashing on the earbuds, it means that they will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “EarFun Air Pro 3” earbuds. If a password is needed, type “0000”. After that, the flashing blue light will turn off, and the pairing will be done.

To PC (Windows)

Step 1: Unlock the desired device.

Step 2: Turn on Bluetooth on the device.

Step 3: Go to the Settings.

Step 4: Go to “Bluetooth and other devices”.

Step 5: Click on “Add device”.

Step 6: Open the lid of the charging case. After that, a blue light will flash for about 1 second, and the earbuds will turn on automatically.

When a blue light starts flashing on the earbuds, it means that they will be ready to pair with any device.

Step 7: Select the “EarFun Air Pro 3” earbuds. If a password is needed, type “0000”. After that, the flashing blue light will turn off, and the pairing will be done.

EarFun-Air-Pro-3-Manual-1
Credits: EarFun

How to Connect To A New Device?

To connect these earbuds to a new device, you have two options to follow:

Option A

Step 1: Open the lid of the charging case. After that, a blue light will flash for about 1 second, and the earbuds will turn on automatically.

Step 2: Go to the Bluetooth settings of the connected device.

Step 3: Delete the “EarFun Air Pro 3” earbuds. This will unpair the earbuds from the device they are connected to.

When a blue light starts flashing on the earbuds, it means that they will be ready to pair with any device.

Step 4: Unlock the new desired device.

Step 5: Turn on Bluetooth on the desired device.

Step 6: Go to the device’s Bluetooth settings.

Step 7: Select the “EarFun Air Pro 3” earbuds. If a password is needed, type “0000”. After that, the flashing blue light will turn off, and the pairing will be done.

EarFun-Air-Pro-3-Manual-2
Credits: EarFun

Option B

Step 1: Place the earbuds into the charging case and make sure that they are in charging mode.

Step 2: With the lid of the case open, press and hold the button on the inside of the charging case for about 3 seconds, until the light on the earbuds starts flashing blue quickly. This means that they are now in pairing mode.

Step 3: Unlock the new desired device.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Go to the device’s Bluetooth settings.

Step 6: Select the “EarFun Air Pro 3” earbuds. If a password is needed, type “0000”. After that, the flashing blue light will turn off, and the pairing will be done.

EarFun-Air-Pro-3-Manual-3
Credits: EarFun

Pairing and Connecting Two Devices Simultaneously

These earbuds support a two-device connection, and all you have to do is to follow the following steps:

Step 1: Pair the earbuds with the first device as shown in the pairing section above.

Step 2: Keep the earbuds in the charging case.

Step 3: Press and hold the button on the inside of the charging case for about 3 seconds, until the light on the earbuds starts flashing blue quickly. This means that they are now in pairing mode and will disconnect from the first device.

Step 4: Pair the earbuds with the second device as shown in the pairing section above.

Step 5: Manually reconnect the earbuds on the first device.

EarFun-Air-Pro-3-Manual-4
Credits: EarFun

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, a blue light will flash for about 1 second, and the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, a red light will flash for about 1 second, and the earbuds will turn off automatically.

EarFun-Air-Pro-3-Manual-5
Credits: EarFun

How to Control? / How to Operate? – Instructions

NOTE: The multifunction touch button is placed on the top circular part of the body of the earbuds.

  • Play or pause a song: Press the multifunction touch panel on any of the earbuds two times.
  • Turn the volume up: Press the multifunction touch panel on the right earbud one time.
  • Turn the volume down: Press the multifunction touch panel on the left earbud one time.
  • Play the next song: Press the multifunction touch panel on the right earbud three times.
  • Play the previous song: Press the multifunction touch panel on the left earbud three times.
  • Answer an incoming call: Press the multifunction touch panel on any of the earbuds two times.
  • End a current call: Press the multifunction touch panel on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch panel on any of the earbuds for about 2 seconds.
  • Answer and transfer two calls to the connected device: Press the multifunction touch panel on any of the earbuds three times.
  • Activate the voice assistant: Press and hold the multifunction touch panel on the right earbud for about 2 seconds.

How to Use The ANC Mode?

To activate or deactivate the ANC mode in these earbuds, all you have to do is to press and hold the multifunction touch panel on the left earbud for about 2 seconds.

EarFun-Air-Pro-3-Manual-7
Credits: EarFun

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, it can get charged using a wireless charger.

EarFun-Air-Pro-3-Manual-8
Credits: EarFun

How to Reset And Reconnect The Earbuds?

If you fail to build the connection between the two earbuds, or between the earbuds and the desired device, try the following steps:

Step 1: Place both earbuds into the charging case.

Step 2: With the lid of the case open, press and hold the button on the inside of the charging case for at least 8 seconds, until the light on the earbuds starts flashing purple. This means that the resetting process was successful.

Step 3: Delete all pairing information from the “EarFun Air Pro 3” earbuds on the connected device.

What Do The Lights Mean?

Earbuds

  • A blue light flashes for 1 second: The earbuds turn on.
  • A red light flashes for 1 second: The earbuds turn off.
  • A blue light flashing: The earbuds are now in pairing mode.
  • Said flashing blue light turns off: The earbuds are now connected to the device.
  • A purple light flashing: The earbuds are resetting.

Charging case

  • Three white lights on with the earbuds inside: The earbuds have more than 60% of battery.
  • Two white lights on with the earbuds inside: The earbuds have more than 20% of battery.
  • A white light on with the earbuds inside: The earbuds have less than 20% of battery.
  • A white light flashing with the earbuds inside: The earbuds have less than 5% of battery.
  • A white flashing while charging: The case is charging.
  • Three white lights on while charging: The case is fully charged.
EarFun-Air-Pro-3-Manual-10
Credits: EarFun

A Guide To The EarFun Air Pro 3 App

These earbuds can be used alongside a specialized app that can be downloaded on both Android and Apple devices, called EarFun Audio.

After connecting the earbuds with the app, you will be able to see the battery percentage in each earbud and the charging case. Also, you will have the ANC, Ambient Sound, and normal sound configuration, plus the option of activating or deactivating the gaming mode, which only can be made using the app. On the other hand, there is an equalizer, product tutorial, and customizable controls.

earfun-air-pro-3-manual-app

How To Update The Earbuds Firmware?

NOTE: Make sure that the earbuds have more than half of the battery.

Step 1: Connect the earbuds with the EarFun Audio app.

Step 2: Select the earbuds.

Step 3: Go to the gear icon on the top right of the app.

Step 4: Click on “Firmware Version”. It will show you the firmware version and whether there is an upgrade available or not.

Step 5: If there is an update available, then select “Update”.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

EarFun-Air-Pro-3-Manual-11
Credits: Scarbir

FAQs

Are the EarFun Air Pro 3 waterproof?

No, the EarFun Air Pro 3 are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

Do the EarFun Air Pro 3 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the EarFun Air Pro 3 have a low latency/gaming mode?

No. These earbuds don’t have a low latency/gaming mode.

Can the EarFun Air Pro 3 connect to PCs and laptops?

Yes, these earbuds can connect to PCs, laptops, and even tablets.

Are the EarFun Air Pro 3 noise-canceling?

Yes. These earbuds come with noise-cancellation technology.

We hope you now know how to operate the earbuds from the above EarFun Air Pro 3 manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.