EarFun Free Manual | Step-by-step, In-depth Guide 2021

The EarFun Free comes with Bluetooth 5.0 with AAC codec, the IPX7 certification, a battery life of 6 hours, a 6mm driver size, a Qualcomm chipset, and much more. Learn how to use them with this new EarFun Free Manual.

EarFun Free Manual | Everything You Need To Know!

EarFun Free Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. They will automatically turn on and will be ready to pair to any device.

Step 2: Go to the Bluetooth settings.

Step 3: Select “EarFun Free”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. They will automatically turn on and will be ready to pair to any device.

Step 7: Select “EarFun Free”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

EarFun Free Manual | How to Wear?

Step 1: Choose the ear tips that fit your ears the best.

Step 2: Identify the left and right earbuds.

Step 3: Rotate the earbuds and pop them into the ear, then shake your head to check the wearing stability.

Step 4: Adjust the mic towards the mouth to gain a better calling experience.

EarFun Free Manual | How to Activate Mono Mode?

To activate the mono mode on the EarFun Free, all you have to do is to pair the earbuds to any device, and then place one of them into the charging case. The other one will start working by itself and a white light will turn on.

EarFun Free Manual | How to Turn On And Off?

Automatically

Turn on: Open the lid of the charging case. They will automatically turn on.

Turn off: Place the earbuds into the charging case. They will automatically turn off.

Manually

Turn on: Press and hold the multifunction button on both earbuds for 2 seconds.

Turn on: Press and hold the multifunction button on both earbuds for 5 seconds.

How to Control? / How to Operate? – Instructions

• Play and pause music: Press the multifunction button on any of the earbuds once.
• Play the next song: Press the multifunction button on the right earbud three times.
• Play the previous song: Press the multifunction button on the left earbud three times.
• Turn the volume up: Press the multifunction button on the right earbud two times.
• Turn the volume down: Press the multifunction button on the left earbud two times.
• Answer an incoming call: Press the multifunction button on any of the earbuds once.
• End a call: Press the multifunction button on any of the earbuds once.
• Change between an actual call and an incoming call: Press the multifunction button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction button on any of the earbuds for 2 seconds.
• Activate the Voice Assistant: Press and hold the multifunction button on any of the earbuds for 2 seconds.

EarFun Free Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

EarFun Free Manual | LED Light Status

Earbuds

• Blue light flashing for 1 second: Earbuds turn on.
• Red light flashing for 1 second: Earbuds turn on.
• Blue light flashing quickly: Earbuds in pairing mode.
• Blue light turns off: Earbuds connected.
• Red light flashing every 5 seconds: Earbuds charging.
• Red light turns off: Earbuds fully charged.
• Purple light flashing quickly: Earbuds resetting.

Case

• One light on: Case has less than 10% of battery.
• Two lights on: Case has less than 50% of battery.
• Three lights on: Case has less than 80% of battery.
• Four lights on: Case is fully charged.

EarFun Free Manual | How to Reset?

Step 1: Unpair the “EarFun Free” from the device they are connected to and delete the old connection on it.

Step 2: Take both earbuds out of the charging case.

Step 3: Press and hold the multifunction button on both earbuds for 5 seconds to turn them off, until a red light turns on.

Step 4: Press and hold the multifunction button on both earbuds for at least 8 seconds until a purple light starts flashing.

Step 5: After that, place them into the charging case and the resetting will be.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

EarFun Free earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above EarFun Free Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the EarFun company, all your information can be found on its Contact Page, where you can find numbers and emails available for several countries! Also, EarFun provides in-depth instructions and troubleshooting problems on this page.